The KSFM Journal of Fluid Machinery (한국유체기계학회 논문집)

Korean Society for Fluid machinery (한국유체기계학회)
권호 표지
DOI QR코드

DOI QR Code

Design Optimization of a Centrifugal Pump Impeller using RSM and Design of Volute

반응표면기법을 이용한 원심펌프 임펠러 최적설계 및 벌류트 설계

  • 편권범 (한양대학교 대학원 기계공학과) ;
  • 김준형 (한양대학교 대학원 기계공학과, 한국생산기술연구원) ;
  • 최영석 (한양생산기술연구원 에너지설비센터) ;
  • 윤준용 (한양대학교 기계공학과)
  • Received : 2011.09.22
  • Accepted : 2012.01.24
  • Published : 2012.06.01
Download PDF
⟨ Previous Next ⟩

Abstract

In this study, optimization of the impeller and design of volute were carried out in order to improve the performance of a centrifugal pump. Design parameters from vane plane development for impeller design were selected, and effect of the design parameters on the performance of the pump was analyzed by using Response Surface Methodology(RSM) to optimized impeller. In addition, total pump design method was suggested by designing volute which was suitable for the optimized impeller through volute design where Stepanoff theory was applied and numerical analysis.

Keywords

References

  1. Kim, S., 2007, "Design Optimization of a Centrifugal Pump Impeller using DOE and RSM," Master Thesis, Hanyang university.
  2. Kim, D. S., Choi, Y. S., Jeon, S. G., and Yoon, J. Y., 2006, "A Numerical Study on the Effect of Volute Geometry on the Performance of Centrifugal Pump," Journal of Fluid Machinery, Vol. 9, No. 2, pp 44-49.
  3. Park, S. H., 2001, "Modern Design of Experiments," Minyongsa, Seoul, pp. 121-140.
  4. A. J. Stepanoff., 1957, "Centrifugal and Axial Flow Pumps," Willy, New York.
  5. Imaichi, K. and Murakami, Y. and Tsurusaki, H. and Cho, K. R., 2002, "The Basis of Pump Design."
  6. Kim, J. H., Choi, Y. S., and Park, P. J., 2009, "Performance improvement of centrifugal pump with double volute," Journal of Fluid Machinery, pp 41-12.
  7. Lee, S. P. and Ha, S. K., 2008, "Performance Evaluation for Coordinate Measuring Machine using Design of Experiments," Transaction of the korean Society of Machine Tool Engineers, Vol. 17, No. 4, pp 133-139.
  8. Khin Cho Thin, Mya Mya Khaing, and Khin Maung Aye., 2008, "Design and Performance Analysis of Centrifugal Pump," World Academy of Science, Engineering and Technology, Vol. 36, ISSN 2070-3740.
  9. Lim, J. S., and Chae Hoon Sohn, C. H., 2010 "A Numerical Study on Hydraulic Efficiency of an Impellerfor a Centrifugal Pump," Journal of Korea Society of Mechanical Engineers, Vol. 10, A, pp 3335-3338.

Cited by

  1. Shape Optimization of Impeller Blades for 15,000 HP Centrifugal Compressor Using Fluid Structural Interaction Analysis vol.38, pp.6, 2014, https://doi.org/10.3795/KSME-B.2014.38.6.547
  2. Simulation-based turbofan shape optimization for reducing power consumption and noise of a bladeless circular ceiling air conditioner vol.18, pp.8, 2017, https://doi.org/10.1007/s12541-017-0135-z
  3. Design Optimization of Two-Way Pump Casing through Flow Analysis vol.31, pp.2, 2018, https://doi.org/10.7734/COSEIK.2018.31.2.79
  4. 효율향상을 위한 폐수처리용 2 Vane 펌프 설계 최적화 vol.32, pp.4, 2012, https://doi.org/10.7316/khnes.2021.32.4.277