• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.453-456
• /
• 2000

This paper presents experimental results on selecting optimal process parameters for UV-Vaccum casting. The UV-Vacuum casting is a relatively new process that allows very rapid mold preparation and part duplication via UV curing. Effect of various process variables such as pressure and temperature on mold strength and part accuracy was evaluated by using Taguchi method.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1997년도 춘계학술대회논문집
• /
• pp.155-158
• /
• 1997

The investigation deals with of a intermediate process condition hving a bolt-shaped final product where it is required to extend tool-life in forging. In this study, optimization of the design variables is conducted by a genetic algorithm, where the fitness values are evaluated on the basis of FEM analysis model. The approach is applied to the determination of the intermediate process conditions which are optimal with regard to minimization of peak die pressure.

• 생명과학회지
• /
• 제20권10호
• /
• pp.1433-1442
• /
• 2010

Aureobasidium pullulans HP-2001 균주를 사용하여 풀루란을 대량 생산을 위하여 7 l 및 100 l 생물배양기를 사용하여 용존산소와 관련된 조건을 최적화하였다. 풀루란의 생산에 최적인 탄소원과 질소원은 각각 50.0 g/l 포도당 및 2.5 g/l 효모추출물이었으며 플라스크 규모에서의 풀루란 변환율은 37%이었다. 풀루란 생산 균주의 생장에 최적인 배지의 초기 pH 및 배양온도는 7.5 및 30oC이었으나 풀루란의 생산에 최적인 배지의 초기 pH 및 배양 온도는 각각 6.0 및 $25^{\circ}C$이었다. 7 l 생물배양기에서 Aureobasidium pullulans HP-2001 균주의 생육에 최적인 교반속도 및 통기량은 각각 600 rpm 및 2.0 vvm이었으나 풀루란 생산에 최적인 조건은 각각 500 rpm 및 1.0 vvm이었으며 최적 조건에서 풀루란의 생산농도는 18.13 g/l이었다. 100 l 생물배양기에서 풀루란 생산 균주의 생장에 최적인 내압은 0.0 kgf/$cm^2$이었으나, 풀루란 생산에 최적인 내압은 0.4 kgf/$cm^2$이었으며 최적 조건에서 풀루란의 생산 농도는 22.89 g/l이었다. 이는 내압이 없는 상태에 비하여 풀루란의 생산 농도가 1.38배 증가한 것이다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2004년도 춘계학술대회 논문집
• /
• pp.70-75
• /
• 2004

In this study, the pattern of lens aberration was studied at different injection molding conditions such as injection speed, holding pressure, holding pressure time, mold temperature and cylinder temperature and, then, the results were analyzed with a laser interferometer. It was demonstrated that optimal condition of lens aberration could be achieved by adjustment of injection molding conditions.

• 한국항공운항학회지
• /
• 제14권1호
• /
• pp.36-42
• /
• 2006

Kriging has been effectively used to approximate for optimization. This study has been devised to improve efficiency and accuracy of approximate optimal design using Kriging. The design of experiments (DOE), the classical design and space-filling design, are used to provide maximum information using minimum number of design of experiments. The proposed methodology is applied to the designs of 3-bar truss and Sandgren's pressure vessel.

• 한국염색가공학회지
• /
• 제10권6호
• /
• pp.1-9
• /
• 1998

The effects of oxygen plasma treatments at different discharge power, reaction pressure, treatment time on yellowing of polyester fabrics were studied. Surface characteristics of the treated fabrics were also investigated by means of SEM and ESCA. The results were as follows : The yellowing of fabrics increases as the power and the treatment time are increased, and decreases as the pressure is increased. The plasma treatment of 100 Watt, 200 mTorr, 5 min. is the optimal condition which is most effective in holding whiteness as well as high weight loss of fabrics.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 추계학술대회 논문집
• /
• pp.77-81
• /
• 2001

The present study is concemed with the design of high pressure container reinforced by winding wire used as a die component in cold forming of metals. The stress analysis for the design of high pressure container has been made under an optimal design criterion. The wire-winding equipment and the tension control unit according to the theoretical winding force are installed. The circumferential stresses at the inner wall of die housing are measured every turn of wire-winding. The measure stresses are in good agreement with the analytically predicted ones.

• 대한수학회보
• /
• 제51권6호
• /
• pp.1655-1668
• /
• 2014

In this article, we propose and analyze a new nonconforming primal mixed finite element method for the stationary Stokes equations. The approximation is based on the pseudostress-velocity formulation. The incompressibility condition is used to eliminate the pressure variable in terms of trace-free pseudostress. The pressure is then computed from a simple post-processing technique. Unique solvability and optimal convergence are proved. Numerical examples are given to illustrate the performance of the method.

• Structural Engineering and Mechanics
• /
• 제4권4호
• /
• pp.451-460
• /
• 1996

We propose a new shape of cylindrical shell formed by multiples vaults which gives a self-stiffening against buckling. By an experimental and numerical study of cylindrical shells with a repeated defect, on the circumferential direction made only of outside oriented wave-defects, we show that multiple vault cylindrical shells can have a good behaviour in buckling. An optimal behaviour is obtained by optimization of the vaults number, with conduces to a special multiple vault cylindrical shell named "ASTER shell".

• 한국유체기계학회 논문집
• /
• 제19권3호
• /
• pp.53-56
• /
• 2016

In this study, experiments and finite element method analysis were used to determine the autofrettage pressure that is optimal and then maximizes the cycling life of Type3 composite cylinders used in self-contained breathing apparatus. For both approaches, the cylinders were pressurized at 100, 110, ${\ldots}$, 290 % of the test pressure, respectively. The stresses were computed by the FEM analysis; while the strains of cylinders were recorded and the failure modes were monitored during the cycling test. As a result, from the good agreements between the simulations and experiments, it was concluded that at least 70 % of the test pressure should be applied as the autofrettage pressure in order to takes visible effect on the cycling life, and 160 % of the test pressure induces the maximum cycling life and the desired failure mode.