• 한국안전학회지
• /
• 제25권6호
• /
• pp.115-122
• /
• 2010

최근 들어 교량과 같은 구조물에 대한 생애주기비용(Life Cycle Cost, LCC) 분석의 중요성이 점차 커지고 있다. 그러나 교량의 공용수명 동안 발생할 수 있는 생애주기비용은 설계 및 시공조건 그리고 사용환경에 따라 많은 불확실성을 내포하고 있기 때문에 정확히 예측하기 힘들다. 본 논문에서는 교량의 생애주기비용 최적설계를 위한 설계방법을 제시하였다. 교량의 총생애주기비용은 초기비용, 손상비용 유지관리비용, 보수/보강비용, 사용자비용, 해제/폐기비용의 합으로 산정하였다. 생애주기비용을 목적함수로 하고 도로교설계기준을 제약조건으로 최적화를 수행하였다. 초기비용은 종합불가정보 및 참고자료를 근거로 산출하였으며, 하중 및 부재에 대한 불확실성을 고려하기 위해 손상확률의 개념을 도입하여 손상비용을 산출하였다. 교량의 내하율곡선을 이용하여 교량의 보수/보강 비용을 추정하였으며, 차량운행비용과 시간지연비용으로부터 사용자비용을 산정하였다. 이로부터 교량에 대한 생애주기비용 최적설계를 수행하고 주요인자들에 대한 영향을 살펴보았다.

• 대한산업공학회지
• /
• 제35권1호
• /
• pp.73-86
• /
• 2009

This paper discusses a method of determining the optimal design of a block. A horizontal layout of blocks is assumed in which transfer points are located at a side of the block. Each block has several transfer points (TPs) each of which is assigned to a group of adjacent bays and located at the center of the assigned group. The goal is to find the optimal size of a block and the optimal number of TPs while minimizing the total cost consisting of the fixed and operational cost of yard cranes (YCs), the operational cost of internal trucks, and the installation cost of TPs. Constraints on the maximum expected system time of trucks are imposed for the optimization. Formulas for estimating handling operation cycle times of a YC are derived analytically. Numerical experiments are conducted to illustrate optimal block designs for a given set of data.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제16권3호
• /
• pp.224-230
• /
• 2016

Purpose: Military maintenance involves corrective and preventive actions carried out to keep a system in or restore it to a predetermined condition. This research develops an optimal maintenance cycle for aviation oil testing equipment with acceptable reliability level and minimum maintenance cost. Methods: The optimal maintenance policy in this research aims to satisfy the desired reliability level at the lowest cost. We assume that the failure process of equipment follows the power law non-homogeneous Poisson process model and the maintenance system is a minimal repair policy. Estimation and other statistical procedures (trend test and goodness of fit test) are given for this model. Results: With time varying failure rate, we developed reliability-based maintenance cost optimization model. This model will reduce the ownership cost through adopting a proactive reliability focused maintenance system. Conclusion: Based on the analysis, it is recommended to increase the current maintenance cycle by three times which is 0.5 year to 1.5 years. Because of the system's built-in self-checking features, it is not expected to have any problems of preventative maintenance cycle.

• Computers and Concrete
• /
• 제25권2호
• /
• pp.167-179
• /
• 2020

Optimal design of structures against earthquake loads is often limited to reduce initial construction costs, while the cost induced to structures during their useful life may be several times greater than the initial costs. Therefore, it is necessary to consider the indirect costs due to earthquakes in the design process. In this research, an integrated methodology for calculating life cycle cost (LCC) of moment-resisting concrete frames is presented. Increasing seismic safety of structures and reducing human casualties can play an important role in determining the optimal design. Costs incurred for structures are added to the costs of construction, including the costs of reconstruction, financial losses due to the time spent on reconstruction, interruption in building functionality, the value of people's life or disability, and content loss are a major part of the future costs. In this research, fifty years of useful life of structures from the beginning of the construction is considered as the life cycle. These costs should be considered as factors of calculating indirect costs of a structure. The results of this work represent the life cycle cost of a 4 story, 7 story, and 10 story moment-resisting concrete frame by details. This methodology is developed based on the economic conditions of Iran in 2016 and for the case of Tehran city.

• 산업경영시스템학회지
• /
• 제24권62호
• /
• pp.1-10
• /
• 2001

The electronics industry is fast growing segment of manufacturing and service industries. It is important that the manufacturer develops a product with adequate life cycle, high quality, and low failure rate in the specified time period. Environmental Stress Screening(ESS) and burn-in are widely used in the electronic industry to assist in the elimination of early failure. In this research, we construct optimal cost model of combined ESS and burn-in under various warranty policy and establish optimal testing times for given environments. Also we conduct sensitivity analysis on various parameter. The results of this study are summarized as follows. Comparing free warranty policy to rebate warranty policy, optimal ESS time is longer under free warranty policy, and optimal burn-in time is longer under rebate warranty policy. Free warranty policy higher than rebate warranty policy in total cost.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.848-851
• /
• 1996

Based on the minimum cutting time criteria, the tool path generation algorithm of a pocket machining is developed as a form of a built-in cycle for the WOP(workshop oriented programming) of a CNC controller. Based on the given CAD database and tool information, an optimal cutting depth and geometric properties can be generated, then six different tool paths will be generated internally and automatically. Finally, the G code which commands tool movements is generated for CNC machining.

• 디지털산업정보학회논문지
• /
• 제6권1호
• /
• pp.55-67
• /
• 2010

Decision problem called an optimal release policies, after testing a software system in development phase and transfer it to the user, is studied. The applied model of release time exploited infinite non-homogeneous Poisson process. This infinite non-homogeneous Poisson process is a model which reflects the possibility of introducing new faults when correcting or modifying the software. The failure life-cycle distribution used generalized gamma type distribution which has the efficient various property because of various shape and scale parameter. Thus, software release policies which minimize a total average software cost of development and maintenance under the constraint of satisfying a software reliability requirement becomes an optimal release policies. In a numerical example, after trend test applied and estimated the parameters using maximum likelihood estimation of inter-failure time data, estimated software optimal release time.

• KIEAE Journal
• /
• 제12권5호
• /
• pp.29-34
• /
• 2012

A rental housing has a key role to supply the living space to non-ownership. A public rental housing is particularly aimed at providing the living space for the low-income households with a low rent fee. Therefore, the local government would try to maintain the facilities of the rental housing and to get the decent living condition. For getting the required living condition, it should make a maintenance plan, which contains the repair time, repair scope and targeted component and finishings. This study is aimed at providing the optimal repair time in 12 components and components of the rental housing which is controlled by the local government. The optimal repair time has two steps to get the final result. First, it would draw the 1'st repair time with the probabilistic and empirical approach. Second, comparing the drawn data and the service life, the optima repair time would be provided with considering the components' attributes. Result are as follows : First, the optimal repair time would be considered with the component attributes. There are user's convenience, its safety and physical aspect. Second, the kitchen utensils, elevator and water tap has a optimal time of 16, 19, 17 years respectively which is considered with physical aspect. In addition, the optima repair time of the wiring appliance and lighting equipment are 12 years and 10 years respectively.

• 제어로봇시스템학회논문지
• /
• 제16권3호
• /
• pp.305-312
• /
• 2010

The aim of this study is to find an analytic solution to the problem of determining the optimal capacity of a batch-storage network to meet demand for finished products in a system undergoing joint random variations of operating time and batch material loss. The superstructure of the plant considered here consists of a network of serially and/or parallel interlinked batch processes and storage units. The production processes transform a set of feedstock materials into another set of products with constant conversion factors. The final product demand flow is susceptible to joint random variations in the cycle time and batch size. The production processes have also joint random variations in cycle time and product quantity. The spoiled materials are treated through regeneration or waste disposal processes. The objective function of the optimization is minimizing the total cost, which is composed of setup and inventory holding costs as well as the capital costs of constructing processes and storage units. A novel production and inventory analysis the PSW (Periodic Square Wave) model, provides a judicious graphical method to find the upper and lower bounds of random flows. The advantage of this model is that it provides a set of simple analytic solutions while also maintaining a realistic description of the random material flows between processes and storage units; as a consequence of these analytic solutions, the computation burden is significantly reduced. The proposed method has the potential to rapidly provide very useful data on which to base investment decisions during the early plant design stage. It should be of particular use when these decisions must be made in a highly uncertain business environment.

• 한국통신학회논문지
• /
• 제28권8A호
• /
• pp.581-590
• /
• 2003

본 논문은 ATM 시스템에서 동적 소스 기반의 점대다중점 호를 위한 라우팅 경로 택 방법을 제안한다. 특히 최적의 경로 선택보다는 리소스를 최대한 공유할 수 있고, 경로 계산 시간 단축 및 cycle 방지를 쉽게 보장할 수 있는 점대다중점 라우팅 경로 선택 방법을 제안하였다. 리소스를 최대한 공유할 수 있도록 하기 위해 착신지(destination) 노드로부터 가장 근거리의 branch point를 찾는 것이 이 알고리즘의 목표이다. 그러므로 목적(destination) 노드로부터 역 추적에 의해 인접한 노드중 같은 Call ID를 갖는 기존 경로상의 노드와 최초로 크로스(cross)되는 노드를 branch노드로 정하여 최적의 점대다중점 라우팅 경로를 구성하는 알고리즘이다. 크로스 노드를 찾을 때까지 역추적에 의해 선택되는 최적의 노트는 다익스트라 알고리즘을 이용하여 선택된다. 즉 점대다중점 라우팅 경로 선택은 역추적에 의한 인접 노드중 기존 경로와 크로스되는 노드 선택 단계와 각 인접 노드중 최적의 노드를 선택하는 단계를 수행한다. 이 기법은 경로 선정을 위한 라우팅 정보 테이블의 검색 및 경로 계산 과정을 단축시키고, 경로 설정시 cycle방지도 쉽게 해결한다.