• 미생물학회지
• /
• 제16권3호
• /
• pp.111-121
• /
• 1978

About 40 temperature-sensitive mutants have been isolated as a preliminary step to study the spore germination, the cell cycle, and the control of macromolecular synthesis in Aspergillus nidulans. To obtain temperature-sensitive mutants rapidly and effectively, the selective enrichment method using antifungal antibiotic nystatin was developed. Based on the data which had applied to the concentration of auxotrophic mutants by the earlier investigators, the optimal concentration and the time of treatment at the nonpermissive temeprature were determined as 50 to 100 units per ml and 4.5 hr., respectively. Out of 41 ts mutants assigned to the strain symbol PK, thirteen that seemed to be arrested at the earlystage of spore germination were subjected to the further cytological and genetic analysis. Elght of these mutants are able to form germ tube and five not. Staining with acid fuchsin for the 5PK strains shows that one irreversible mutant, PK6 strain able to form germ tube, accumulate mitotic spindle, being arrested in mitosis. Another PK15 and PK23 strain have more than one intact nucleolus without germ tube formation at the restrictive temperature. the temperature-senstive mutation in PK12 strain, the onlystrain which is able occurred in certain gene specific for the germination of spore. All of the ts markers are recessive and complement each other in heterokaryon between two different ts markers at the restrictive temperature.

• 미생물학회지
• /
• 제14권1호
• /
• pp.17-24
• /
• 1976

Celluloytic microorgnasims were isolated form the various sources and four of them were identified as Trichoderma roningi, Aspergillus niger, Penicillium chrysogenum, and Streptomyces sp. The induction of extracellular5 cellulase of these species in the liquid culture media containing carboxymethylcellulose (CMC) or Avicel as inducer showed that CMC was a better effective inducer for the production of CMCase(Cx cellulase component) as well as Avicelase(C$_{1}$ cellulase component) than Avicel. It is believed that certain hydrolysis products of cellulose(CMC) could serve as an inducer for an enzyme synthesis. In T. roningi, Asp. niger, and Strptomyces sp., the optimum temperature of CNCase on CMC-culture medium was 50.deg. but temperature around 40.deg.C was found to be optimum for the activities of CMCase prepared from P.ehrysogenum. The optimum temperature for Avicelase activitiles on Avicel-culture media of T. roningi and P. chrysogenum was $40{\circ}C$ whereas temperature $50{\circ}C$ was found to be optimum for Avicelase from A.niger and Streptomyces sp. The optimal activities of these CNCase and Avicelase prepared from. T. ronigi, Pen.chrysogenum and Streptomyces sp. were found similarly to be at pH's around 5.4 and 6.0 while pH 4.8 was optimum for the activities of CMCase and Avicelase from A.niger, indicating that A.niger in acidic media would yield an enzyme of high activity.

• 한국기계가공학회지
• /
• 제18권8호
• /
• pp.8-17
• /
• 2019

In this study, a model reduction technique was used to develop a precise noise and vibration prediction model for the individual components of a driveline system. The dynamic reduced-order model generated by the Craig-Bampton method was applied to perform dynamic analysis of an electric agricultural power cart. The natural frequency and acceleration response results were analyzed according to the different number of dominant sub-structural modes contained in the reduced-order models. Through the analysis results, it was confirmed that a sufficient number of dominant sub-structures to satisfy the operating conditions should be selected to construct an optimal reduced-order model.

• 한국표면공학회지
• /
• 제52권5호
• /
• pp.258-264
• /
• 2019

Assembling heterostructures by combining dissimilar oxide semiconductors is a promising approach to enhance charge separation and transfer in photoelectrochemical (PEC) water splitting. In this work, the CuO nanorods array/$Cu_2O$ thin film bilayered heterostructure was successfully fabricated by a facile method that involved a direct electrodeposition of the $Cu_2O$ thin film onto the vertically oriented CuO nanorods array to serve as the photoelectrode for the PEC water oxidation. The resulting copper-oxide-based heterostructure photoelectrode exhibited an enhanced PEC performance compared to common copper-oxide-based photoelectrodes, indicating good charge separation and transfer efficiency due to the band structure realignment at the interface. The photocurrent density and the optimal photocurrent conversion efficiency obtained on the CuO nanorods/$Cu_2O$ thin film heterostructure were $0.59mA/cm^2$ and 1.10% at 1.06 V vs. RHE, respectively. These results provide a promising route to fabricating earth-abundant copper-oxide-based photoelectrode for visible-light-driven hydrogen generation using a facile, low-cost, and scalable approach of combining electrodeposition and hydrothermal synthesis.

• 한국컴퓨터정보학회논문지
• /
• 제11권3호
• /
• pp.161-166
• /
• 2006

본 논문은 시간 제약 조건하에서의 모듈 선택 재사용을 이용한 CPLD 저전력 기술 매핑을 제안한다. 일반적인 상위 수준 합성에서의 스케줄링은 실제적인 라이브러리의 복잡한 재사용을 허용하지 않는다. 반면 제안한 알고리즘은 주어진 사용자 정의 모듈을 실제적인 RT 라이브러리 모듈 재사용과 공유된 자원에서의 스위치 활동의 자원 공유하여 스케줄링을 수행한다. 스케줄링은 체이닝과 멀티사이클링을 이용해 다양한 상위 레벨 벤치마크의 환경에서 최적의 스케줄링의 결과를 얻는다. 스케쥴링의 결과 재사용된 자원은 CPLD 저전력 기술 매핑 알고리즘을 이용하여 저전력으로 회로를 구현한다.

• 한국산업정보학회논문지
• /
• 제24권1호
• /
• pp.31-38
• /
• 2019

본 논문에서는 초음파 응용 영상 기술의 다양한 임상 진단 응용이 가능한 파이프라인 회로 구성 방식을 가지는 빔포밍 프런트 엔드 플랫폼을 개발한다. 하드웨어 설계에서는 전력, 통합수준 및 복제 가능성이 중요한 확장 가능한 애플리케이션은 물론 압축 애플리케이션을 대상으로 한다. 펌웨어 디자인으로는 차세대 고수준의 합성 도구인 Vivado HLS 툴을 사용하여 최대의 생산성 향상으로 설계 생산성을 가속화하는 새로운 IP 및 시스템 중심 설계 환경 구축을 통하여 최적의 FPGA 병렬 처리 수준을 달성 하도록 구현하였다. 설계된 디지털 빔포머는 향후 시스템 사양의 재구성이나 변경시 적절한 수정 및 보완이 가능하고, 임의의 이미지 영역을 생성할 수 있는 스캔 데이터의 고속 관리 기능을 지원한다.

• Journal of Industrial and Engineering Chemistry
• /
• 제67권
• /
• pp.72-79
• /
• 2018

Hybrid F2HX surfactants bearing a sulfate moiety and both hydrocarbon and fluorocarbon chains were prepared by the reaction of alkyl glycidyl ethers with fluoro-alcohol, and subsequent sulfation. The fluorocarbon number in F2HX was fixed at the shortest number possible (i.e., 2), while the hydrocarbon number (X) in the second chain was varied between 2, 4, 6, and 8. Their surface-active properties and emulsion stabilities were systematically estimated as a function of the X. Among them, F2H8 exhibited the optimal surfactant performance, which was comparable to previously reported surfactants and it was successfully applied in the emulsion polymerization of vinylidene fluoride.

• Journal of Microbiology and Biotechnology
• /
• 제32권5호
• /
• pp.672-679
• /
• 2022

Microbial lipases are used widely in the synthesis of various compounds due to their substrate specificity and position specificity. 4-Ethyl malate (4-EM) made from diethyl malate (DEM) is an important starting material used to make argon fluoride (ArF) photoresist. We tested several microbial lipases and found that Photobacterium lipolyticum M37 lipase position-specifically hydrolyzed DEM to produce 4-EM. We purified the reaction product through silica gel chromatography and confirmed that it was 4-EM through nuclear magnetic resonance analysis. To mass-produce 4-EM, DEM hydrolysis reaction was performed using an enzyme reactor system that could automatically control the temperature and pH. Effects of temperature and pH on the reaction process were investigated. As a result, 50℃ and pH 4.0 were confirmed as optimal reaction conditions, meaning that M37 was specifically an acid lipase. When the substrate concentration was increased to 6% corresponding to 0.32 M, the reaction yield reached almost 100%. When the substrate concentration was further increased to 12%, the reaction yield was 81%. This enzyme reactor system and position-specific M37 lipase can be used to mass-produce 4-EM, which is required to synthesize ArF photoresist.

• 대한의생명과학회지
• /
• 제28권2호
• /
• pp.67-82
• /
• 2022

The prevalence of SARS-CoV-2 led to inconsistent public health policies that resulted in COVID-19 containment failure. These factors resulted in increased hospitalization and death. To prevent viral spread and achieve herd immunity, the only safe and effective measure is to provide to vaccinates. Ever since the release of the SARS-CoV-2 nucleotide sequence in January of 2020, research centers and pharmaceutical companies from many countries have developed different types of vaccines including mRNA, recombinant protein, and viral vector vaccines. Prior to initiating vaccinations, phase 3 clinical trials are necessary. However, no vaccine has yet to complete a phase 3 clinical trial. Many products obtained "emergency use authorization" from governmental agencies such as WHO, FDA etc. The Korean government authorized the use of five different vaccines. The viral vector vaccine of Oxford/AstraZeneca and the Janssen showed effectiveness of 76% and 66.9%, respectively. The mRNA vaccine of Pfizer-BioNTech and Moderna showed effectiveness of 95% and 94.1%, respectively. The protein recombinant vaccine of Novavax showed an effectiveness of 90.4%. In this review, we compared the characteristics, production platform, synthesis principles, authorization, protective effects, immune responses, clinical trials and adverse effects of five different vaccines currently used in Korea. Through this review, we conceptualize the importance of selecting the optimal vaccine to prevent the COVID-19 pandemic.

• 근관절건강학회지
• /
• 제30권2호
• /
• pp.70-82
• /
• 2023

Purpose: This study aims to systematically clarify and enhance the understanding of osteoporosis prevention interventions based on Health Belief Model (HBM). The analysis includes HBM constructs, intervention characteristics, and outcomes from prior studies. Methods: We extensively searched eight electronic databases to identify peer-reviewed studies that implemented HBM-based interventions for osteoporosis prevention until June 2023. Results: Initially, 638 articles were identified, and after a rigorous evaluation process, 11 articles were included in the evidence synthesis. The analysis revealed that HBM-based interventions significantly improved likelihood of taking action including knowledge, HBM constructs and adopting preventive behaviors such as calcium intake and exercise. However, most interventions included in this study did not fully encompass all five HBM constructs or specify the particular components adopted. Conclusion: There is a need for additional research and intervention refinement for a more comprehensive understanding of osteoporosis preventive interventions. This should involve a concerted effort to incorporate all HBM constructs into the context of osteoporosis prevention. Thus, more effective interventions promoting optimal preventive behaviors and reducing the burden of osteoporosis can be developed.