• Health Policy and Management
• /
• v.11 no.4
• /
• pp.88-108
• /
• 2001

Separation of prescribing and dispensing practice in Korea has changed the service pattern of the pharmacy. The prescription dispensing activities, however, are concentrated excessively on the pharmacies near hospitals or clinics. Thus this study was conducted to estimate the number of optimal dispensing cases for the community pharmacy. Forty-six pharmacies were selected using systematic stratified random sampling method, and ninety-five pharmacists were interviewed on their workload of dispensing and other activities at pharmacies. One hundred and seventy prescriptions were chosen based on the length of drug administration and drug dosage form, and the dispensing time was measured by time-watch method. Also pharmacy benefit claims data were analyzed to identify the characteristics of the pharmacies which performed more than optimal dispensing cases. According to the study results, the average work time per pharmacist per day was found to be 10hours 32minutes and the dispensing activities occupied 7hours 36minutes. It took 5.72minutes on average for each dispensing case. The optimal dispensing case was estimated as 75 cases under the condition of 10hours 32minutes work time and 6% allowance rate. Even though the pharmacies near hospitals or clinics participated dispensing services actively, only pharmacies near clinics dealt with more than optimal dispensing cases. For the pharmacies near hospitals they dealt with less than optimal cases, but drug administration period per prescription was almost 3 times longer than that of pharmacies near clinics. Thus the intensity of dispensing activities such as drug administration period is to be considered to estimate optimal dispensing cases more accurately.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.14 no.4
• /
• pp.169-178
• /
• 2010

In this study, the optimal strengthening by micro genetic algorithm(${\mu}$-GA) method is proposed for improvement of load-carrying capacity of RC hollow slab bridges using external prestressing. The Qeen-post type and King-post type are considered for the optimal strengthening. The type for optimal strengthening, deviator, areas of tendons and the number of anchor are calculated by ${\mu}$-GA. The objective function is constituted with dimensionless cost of tendon and steel for optimal strengthening. The constraints are formulated by design specification for bridges and anchors. The validity of this study is presented by analysis of the results after the optimal strengthening of the RC hollow slab bridge.

• Journal of the Korean Society of Industry Convergence
• /
• v.25 no.3
• /
• pp.357-363
• /
• 2022

In this study, in order to develop an non-slip metal grating, the stability of the grating according to the span of the grating and the gap and height of the bearing bar was evaluated. The optimal shape design of the grating was performed using the results of determining the stability of the grating. The purpose of this study is to determine the stability according to the spacing and height of the bearing bar by applying the design pressure at the design stage to develop the anti-skid grating, and to design the optimal shape for cost reduction. In the optimal design, the target variable was set as the mass, and the optimal design of the grating was performed based on about 20%. Regardless of the height of the bearing bar of the grating, the stress and deformation of the span and the grating showed a proportional tendency to each other, and it was found that the stress decreased as the height of the bearing bar increased. Based on the structural analysis results, an optimal design was performed using mass as the objective variable, and the existing 2mm thickness was changed to 1.6mm, reducing the mass by about 19%. The stress increased by about 4.4% compared to the maximum stress of the existing grating, but the minimum safety factor was 3.1, indicating that the optimally designed grating was stable.

• Journal of the Korea Safety Management & Science
• /
• v.2 no.1
• /
• pp.161-170
• /
• 2000

When designing the parameter on the multiple quality characteristics, there has been a study for optimization of problems, but there has been few former study on the possible conflicting phenomena in consideration of the correlations among the characteristics. To solve the issue on the optimal design for multiple quality characteristics, this study modelled the expected loss function with cross-product terms among the characteristics and derived range of the coefficients of the terms. The model will be used to determine the global optimal design parameters where there exists the conflict among the characteristics, which shows difference in optimal design parameters for the individual characteristics.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.49 no.5
• /
• pp.264-268
• /
• 2000

In discuss how the existing study results that decide optimum release time are rational and reasonable, considering the cost and reliability simultaneously in this paper. As a study method this paper examines the proposed results and their methodologies centering around the existing related papers for the general cost-reliability optimal release policies, especially their limitation for the derived results.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1999.06a
• /
• pp.279-284
• /
• 1999

This paper presents a parametric study and an optimal design of the ER-SFD supporting a rigid rotor system. An attempt is made to obtain the optimal design of an ER-SFD for a two degree-of-freedom rotor model. Such a simple model is used in order to get a better insight into the physics of the problem, A maximum whirl amplitude, supply pressure and voltage are considered, and a maximum whirl amplitude is minimized over a range of speeds and presented for some values of unbalance mass. The results presented in this paper provide important design information necessary to reduce a whirl amplitude of an ER-SFD.

• International Journal of Concrete Structures and Materials
• /
• v.6 no.2
• /
• pp.87-100
• /
• 2012

The process of selecting a repair material is a typical one of multi-criteria decision-making (MCDM) problems. In this study Analytical Hierarch Process was applied to solve this MCDM problem. Many factors affecting a process to select an optimal repair material can be classified into quantitative and qualitative requirements and this study handled only quantitative items. Quantitative requirements in the optimal selection model for repair material were divided into two parts, namely, the required chemical performance and the required physical performance. The former is composed of alkali-resistance, chloride permeability and electrical resistivity. The latter is composed of compressive strength, tensile strength, adhesive strength, drying shrinkage, elasticity and thermal expansion. The result of the study shows that this method is the useful and rational engineering approach in the problem concerning the selection of one out of many candidate repair materials even if this study was limited to repair material only for chloride-deteriorated concrete.

• The Mathematical Education
• /
• v.37 no.1
• /
• pp.1-13
• /
• 1998

In this paper, we have represented the efficient way how to enumerate the optimal number-right scores to adjust the item difficulty and to improve item discrimination. To estimate the optimal number-right scores in two equivalent math-tests by linear score equating a measurement error model was applied to the true scores observed from a pair of equivalent math-tests assumed to measure same trait. The model specification for true scores which is represented by the bivariate model is a simple regression model to inference the optimal number-right scores and we assume again that the two simple regression lines of raw scores and true scores are independent each other in their error models. We enumerated the difference between mean value of $\chi$＊ and ${\mu}$$\_$$\chi$/ and the difference between the mean value of y＊and a＋b${\mu}$$\_$$\chi$/ by making an inference the estimates from 2 error variable regression model. Furthermore, so as to distinguish from the original score points, the estimated number-right scores y’$\^$*/ as the estimated regression values of true scores with the same coordinate were moved to center points that were composed of such difference values with result of such parallel score moving procedure as above mentioned. We got the asymptotically normal distribution in Figure 5 that was represented as the optimal distribution of the optimal number-right scores so that we could decide the optimal proportion of number-right score in each item. Also by assumption that equivalence of two tests is closely connected to unidimensionality of a student’s ability. we introduce new definition of trait score to evaluate such ability in each item. In this study there are much limitations in getting the real true scores and in analyzing data of the bivariate error model. However, even with these limitations we believe that this study indicates that the estimation of optimal number right scores by using this enumeration procedure could be easily achieved.

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.2528-2533
• /
• 2007

Thermoforming is one of the most versatile and economical processes available for the manufacturing polymer products. The drawback of thermoforming is difficult to get uniform thickness of final products. For the distribution of thickness strongly depends on the temperature distribution of sheet, the adjustment of heater power is very important In this paper, an optimization study for getting uniform temperature distribution was carried out using dual optimization steps. At first, the steady state optimal distribution of heater power is searched by numerical optimization to get uniform temperature of sheet surface. In the second step, time-dependent optimal heater inputs have been found out to decrease the temperature difference through the direction of thickness using Rseponse Surface Method and D-optimal method. The optimization results show that the time-dependent optimal heater power distribution gives acceptable uniform sheet temperature in the field of forming temperature..

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.1 s.173
• /
• pp.79-86
• /
• 2000

In this study, a method of optimal blank design using the sensitivity analysis has been proposed. To get sensitivity a well-known commercial code PAM-STAMP has been used. In order to verify this method, formings of square cup, clover shaped cup and L shaped cup have been chosen as the examples. With the predicted optimal blank both computer simulation and experiment are performed. Excellent agreements are recognized between the numerical results and the target contour shapes. Through the investigation, the proposed systematic method of optimal blank design is found to be effective in the design of the deep drawing process.