• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.40-42
• /
• 2002

This paper presents the optimal design of BLDC motor keeping the average torque and cogging toruqe of the initial model while minimizing the volume of magnet pole by FEM and Taguchi method. Experimental tests are performed by Finite element method, and the second order polynomial equations are obtained from FEM results due to design parameter variation referred to orthogonal arrays by Taguchi. The presented optimization shows a big reduction of computation time and a largely reduced volume of magnet pole.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.369-369
• /
• 2000

Control system by means of fuzzy theory has demonstrated its robustness in applying to the high-order and nonlinear dynamic system in that it can utilizes the human expert knowledges in system design. In this paper, first, the design methodology of HFC combined PID controller with fuzzy controller by membership function of weighting coefficient is proposed. Second, Second, an auto-tuning algorithms utilizing the simplified reasoning method and genetic algorithms is presented to improve the performance of hybrid fuzzy controller. Especially, in order to obtain the optimal scaling factors and PID parameters of HFC using GA based on advanced initial individual, three kinds of estimation modes such as basic, contraction, and expansion mode are effectively utilized. The proposed HFC is evaluated and discussed in ITAE, overshoot and rising time to show applicability and superiority with simulation results.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1993년도 Fifth International Fuzzy Systems Association World Congress 93
• /
• pp.1195-1198
• /
• 1993

We investigate a systematic design procedure of automated rule generation of fuzzy logic based controller for uncertain dynamic systems such as an engine dynamic model.“Automated Tuning”means autonomous clustering or collection of such meaningful transitional relations in the state-space. Optimal control strategies are included in the design procedures, such as minimum squared error, minimum time, minimum energy or combined performance criteria. Fuzzy feedback control systems designed by the cell-state transition method have the properties of closed-loop stability, robustness under parameter variabtions, and a certain degree of optimality. Most of all, the main advantage of the proposed approach is that reliability can be potentially increased even if a large grain of uncertainty is involved within the control system under consideration. A numerical example is shown in which we apply our strategic fuzzy controller design to a highly nonlinear model of engine idle speed contr l.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1998년도 제2회 박판성형심포지엄 논문집 박판성형기술의 현재와 미래
• /
• pp.74-82
• /
• 1998

The limit drawing ratio (LDR) is a major process parameter in the process design of deep drawing. If the actual drawing ratio is greater than the LDR for a particular stage, then an intermediate stage has to be added to the process sequence to avoid failure during the ratio. In this study, the optimal process design considering forming limit is performed for the first-drawing and redrawing by using finite element method combined with ductile fracture criterion. The LDR and the site of fracture initiation are predicted by means of the fracture criterion. From the results of finite element analysis, the optimal value of drawing ratio is obtained, which contributes to the more uniform distribution of thickness and the smaller values of the ductile fracture in final cup.

• 방송공학회논문지
• /
• 제4권2호
• /
• pp.164-175
• /
• 1999

본 논문에서는 QPSK 디지틀 전송 기술을 사용하는 위성방송 전송 시스템에 대한 위성 채널 특성과 전송 신호 특성에 대한 영향을 분석하여 전송 시스템의 설계 기준점을 결정할 수 있도록 하였다. 전송 채널 특성에 의한 열화도는 약 2.0dB, 전송 신호 스펙트럼 특성에 의한 열화는 0.4dB, 그리고 수신기 특성에 대해 약 0.2dB의 열화 특성을 갖는 위성 및 전송 시스템에 대한 가용 설계 파라미터 값들을 제안하였다. 열화 특성을 만족하는 설계 파라미터 값들은 ${\pm}\;0.5dB$ 이내의 진폭 응답 특성 그리고 0.1nsec/MHz, $0.2sec/MHz^2$ 이내의 전파 지연 특성을 나타내었다. 또한, 최대 서비스 가용도를 갖는 위성 전송 시스템의 TWTA 동작은 0dB OBO가 적당하며, 위상 잡음 영향을 최소화하기 위해서는 0.707 damping 계수 및 40kHz 대역폭을 갖는 PLL 회로가 최적의 동작 특성을 나타내었다. 본 논문의 시스템 성능 분석 및 설계 파라미터 값들은 위성을 통한 고속 데이터 전송 시스템에 대한 설계 기준점으로 활용될 수 있다.

• 신재생에너지
• /
• 제1권1호
• /
• pp.72-78
• /
• 2005

Optimal design and proper operation are important to get aimed output power of a polymer electrolyte membrane fuel cell (PEMFC) stack. An air cooling fuel cell stack is widely used in sub kW PEMFC systems. The purpose of this study is to analyze operating conditions affecting the performance of the air cooling PEMFC which is designed for portable application. In portable applications, air cooling stack is difficult to maintain well balanced operating conditions. The importart parameters are the relative humidity, the temperature of the stack, the utilization of reactant gas and so on. in this study, a 500W air cooling PEMFC was fabricated and tested to evaluate the design performance and to determine optimal operating conditions. Moreover, basic modeling also is carried out. These results can be used 3s design criteria and optimal operating conditions for portable PEMFCs

• 한국지반공학회논문집
• /
• 제21권9호
• /
• pp.25-34
• /
• 2005

본 연구에서는 최적의 인공신경망 구조 설계를 위하여 인공신경망과 유전자 알고리즘이 결합된 신경망구조 설계기법이 제안되었다. 저자들은 신경망 구조설계시 인공지능 적용에 따른 계산적인 복잡함을 줄이며, 신경망에 의한 예측의 정확성을 증가시키기 위하여 인공신경망과 유전자 알고리즘의 특성을 조합하였다. 최적의 신경망 구조를 얻기 위하여 신경망 구조의 설계변수들에 대한 유전자 선별기법을 적용하였다. 제안된 합성 기법의 적용성을 평가하기 위하여 여러 지반공학 물성치들을 추정하는 해석에 적용되었다.

• 한국기계가공학회지
• /
• 제18권1호
• /
• pp.1-8
• /
• 2019

The optimal design parameters of a dynamic absorber (DA) in a machine body (that is considered as a rigid body) are discussed in this paper. The bounce and rotation motions of the rigid body have been controlled passively by a DA, which consists of a mass and a spring. The rigid body is subjected to a harmonically excited force and supported by linear springs at both ends. To define the motion of a rigid body with a DA, the equation of motion was expressed in the third-order matrix form. To define the optimal design conditions of a DA, the reduction of dynamic characteristics, represented by the amplitudes of bounce and rotation, and the transmitted powers, were evaluated and discussed. The level of reduction was found to be highly dependent on the location and spring stiffness of the DA.

• 한국정밀공학회지
• /
• 제15권1호
• /
• pp.130-136
• /
• 1998

A procedure of stress and strength analysis has been proposed for the centrifuge rotor of composite materials of quasi-isotropic laminates. The goal in this study is to maximize the allowable rotating speed, that is, to minimize maximum strength ratio with the given path length by changing the geometric parameter-outer radius and ply angles in quasi-isotropic laminates. Optimum values of the geometric parameter-outer radius and ply angles are obtained by multilevel optimization. All the geometric dimensions and stresses are normalized such that the result can be extended to a general case. Two dimensional analysis at each cross section with an elliptic tube hole subjected to internal hydrostatic pressures by samples as well as the centrifugal body forces has been performed along the height to calculate the stress distribution with the plane stress assumption, and Tsai-Wu failure criterion is used to calculate the strength ratio. The maximum allowable rotating speed can be increased by changing the radii of the outer surface along the height with the maximum strength ratio under the unit value : The optimal number of ply angles maximizing the allowable rotating speed in quasi-isotropic laminates is found to be the half number of tube hole, and the optimal laminate rotation angle is the half of $[{\pi}/m]$. A $[{\pi}/3]$ laminate, for instance, is stronger than a $[{\pi}/4]$ laminate for the centrifuge rotor of 6 tube hole number even though they have the same stiffness.

• 한국구조물진단유지관리공학회 논문집
• /
• 제15권6호
• /
• pp.100-109
• /
• 2011

최근 중앙경간 일부를 강박스 거더로 대체하여 자중을 감소시켜 중앙경간의 장경간화를 시도한 교량형식인 콘크리트-강 복합 엑스트라도즈드교는 기존 엑스트라도즈드 교량을 개선하기 위한 대안으로 제시되고 있다. 콘크리트-강 복합 엑스트라도즈드교는 자중 감소를 통해 중앙경간의 장경간화가 가능할 뿐 아니라 기존형식과 동일한 경우 주거더의 높이와 측경간을 감소시킬 수 있어 구조적 효율성이 매우 우수한 형식으로 평가되고 있다. 따라서 콘크리트-강 복합 엑스트라도즈드교에 대한 최적의 설계기법을 구축하는 것이 매우 중요하다. 이를 위하여 본 연구에서는 콘크리트-강 복합 엑스트라도즈드교에 대한 주요 설계변수(주탑 높이, 주거더 높이 및 강상판 거더 길이)를 도출하고, 이를 바탕으로 설계변수별 수치해석과 그 결과를 이용한 설계변수별 민감도 분석을 실시하여 설계변수가 교량의 설계에 미치는 영향을 정량적으로 반영할 수 있는 설계가중값을 도출하였다.