• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 1996.06a
• /
• pp.209-212
• /
• 1996

In this paper, we propose to re-size images using an oblique projection operator instead of the orthogonal one in order to obtain faster, simpler, and more general algorithms. The main advantage is that it becomes perfectly feasible to use higher order models(e.g., splines of degree n 3). We develop the theoretical background and present a simple and practical implementation procedure that uses B-splines. Experiments show that the proposed algorithm consistently outperforms the standard interpolation method and that it essentially provides the same performance as the optimal procedure (least squares solution) with considerably less computations.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10b
• /
• pp.1718-1723
• /
• 1991

The determination of a production sequence is an important problem in a batch process operation. In this paper a new algorithm for a near optimal production sequence of N product in an M unit serial multiproduct batch process is proposed. The basic principle is the same as that of Johnson's algorithm for two-unit UIS system. Test results on a number of selected examples exhibit the superiority over previously reported results. In addition, a tabulation technique is presented to calculate the makespan of a given sequence of production for all processing units under UIS mode.

• Journal of Korean Society for Quality Management
• /
• v.31 no.1
• /
• pp.142-147
• /
• 2003

Burn-in is a widely used method to eliminate the initial failures. Preventive maintenance policy such as block replacement with minimal repair at failure is often used in field operation. In this, paper burn-in and maintenance policy are taken into consideration at the same time. The cost of a minimal repair is assumed to be a non-decreasing function of its age. The problems of determining optimal burn-in times and optimal maintenance policy are considered.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.3 no.2
• /
• pp.95-108
• /
• 1978

This paper discusses an application of mathematical programming techniques in the paper industry in determining optimal parent roll widths. Parent rolls are made from the reels produced at wide paper machines by slitting them to more manageable widths. The problem is finding a set of the slitting patterns that will minimize the trim loss involved in the sheeting operation. Two programming models, one linear and one mixed integer linear, are presented in this paper. Also presented are the computational experience, the model sensitivity, and the comparison of the optimal solutions with the simulated operational data.

• Proceedings of the Korean Statistical Society Conference
• /
• 2002.11a
• /
• pp.147-151
• /
• 2002

Burn-in is a widely used method to eliminate initial failures. Preventive maintenance policy such as block replacement with minimal repair at failure is often used in field operation. In this paper burn-in and maintenance policy are taken into consideration at the same time. The cost of a minimal repair is assumed to be a non-decreasing function of its age. The problems of determining optimal burn-in times and optimal maintenance policy are considered.

• Korean Management Science Review
• /
• v.10 no.2
• /
• pp.111-120
• /
• 1993

The most important factors for a product to survive in the market are cost and quality. In recent years, quality proceeds to cost. There are many techniques of use to improve the quality of a product. One of the techniques is applying statistical methods (especially Taguchi method) to real operational conditions for a continuous manufacturing process in P company. There are 91 factors to control in the process. So, we predetermined 7 main effect factors and 6 interactive effect factors by statistical methods and advices of engineers. With these 13 factors, we determined the optimal level of operations for the process.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.39 no.8
• /
• pp.792-804
• /
• 1990

This paper describes an efficient optimization algorithm by calculating sensitivity function for power system stabilization. In power system, the dynamic performance of exciter, governor etc. following a disturbance can be presented by a nonlinear differential equation. Since a nonlinear equation can be linearized for small disturbances, the state equation is expressed by a system matrix with system parameters. The objective function for power system operation will be related to the system parameter and the initial state at the optimal control condition for control or stabilization. The object function sensitivity to the system parameter can be considered to be effective in selecting the optimal parameter of the system.

• Proceedings of the KIEE Conference
• /
• 1999.07c
• /
• pp.1026-1028
• /
• 1999

In recent deregulation and competitive power market environment, electric utilities plan and operate their systems for economic benefit with secure system condition. Therefore, implementation of Flexible AC Transmission Systems (FACTS) devices can be planned for the efficient utilization of the present system facility. This paper presents a technique to solve the problem about optimal allocation of FACTS devices far the purpose of enhanced system operation.

• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.201-207
• /
• 2007

At an early design stage of rail track, dynamic analyses using a standard vehicle model of ADAMS/Rail are employed. In the real field, it is very difficult to find an optimal solution on the designing of rail track considering future operating vehicles because the construction of rail track should be done in the advance of vehicle selection and operation. Using a standard vehicle model of ADAMS/Rail, however the better selection among designed rail tracks is possible by comparing the dynamic analysis.

• 제어로봇시스템학회:학술대회논문집
• /
• 1987.10b
• /
• pp.394-397
• /
• 1987

This paper presents an analysis of the man-machine control system. A man-machine system depends on the performance of a human operator for proper operation. The analysis method is based upon the assumption that human operator will act in a near optimal controller. Optimal control theory and its associated state space representation is used as the basis for the analytic procedure. The computer simulation for a given plant shows that plant parameters have limited range by the human operator.