• Journal of the Korean Geotechnical Society
• /
• v.17 no.6
• /
• pp.181-191
• /
• 2001

Granular compaction piles increase the load bearing capacity of the soft ground and reduce the settlement of fecundation built on the reinforced soil. Also the granular compaction piles accelerate the consolidation of soft ground using the granular materials such as sand, gravel, stone etc. However, this method is one of unuseful methods in Korea. In the present study, the estimation procedure for the ultimate bearing capacity of randomly installed granular compaction pile group is proposed. Also, carbon rod tests have been peformed for verifying the group effect of granular compaction piles and the behavior characteristics such as bulging failure zone on granular compaction piles. From the test results, it is found that bulging failure shape of granular compaction piles was conical shape and the ultimate bearing capacity increased as the spacing of piles became gradually narrow. Also, from the proposed method in this study, the optimal locations of granular compaction piles with various installed cases are analyzed. The results were shown that the bearing capacity was increased in the case concentrated on the central part of pile group.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.32 no.2
• /
• pp.132-147
• /
• 1996

The optimal design of floating type fisheries facilities in the open sea is demanded considering with the severe hydrodynamic forces on floating body, mooring tension and holding force of anchor. For conserving the facilities in most effective state, design and selection of anchor system is one of the most important fundamental subject. To enhance the design procedure of anchor system the holding forces of anchor are investigated by the hydraulic model test and are compared with the typical conventional results for various anchors. Applicability of previous estimation methods of holding force are checked and holding mechanism of anchor is discussed. Using the results a new computational concept of holding force is suggested considering mainly the effects of passive soil pressure (resistance), steady soil pressure, and surface friction etc. The new estimation method is proved as a feasible one by comparing the results of hydraulic model experiments. Applicability of various anchors to the anchor system on open sea fisheries structures is comprehensively reviewed using the present model tests and previous study results in the viewpoint of economy, construction and stability etc. Using the results, fundamental anchoring system design procedures are suggested to apply huge marine ranching complex with increase of the holding capacity of anchor under the optimum cost.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.22 no.3
• /
• pp.219-237
• /
• 2020

Rapid economic development and urban population growth have been increasing the necessity for underground space exploration and utilization due to the need of upgrading and expanding the existing infrastructures. TBM has been widely used to construct underground structures with high advance rate and minimal ground disturbance. Two important design parameters, which are available thrust capacity and cutterhead torque, should be estimated for any project in addition to proper selection of TBM type. However, the conventional thrust force and torque estimation model only depends on the empirical equation, which hinders the design process of the optimal thrust hydraulic system and the appropriate hydraulic components. In this study, four thrust and torque calculation models are derived and explained. For TBM design practice, the four estimation models are compared and discussed.

• Journal of Korean Institute of Industrial Engineers
• /
• v.4 no.2
• /
• pp.91-96
• /
• 1978

A modeling framework and its computational methodology for an industrial sector of the economy are investigated. The suggested industrial sector model is characterized by a programming (process analysis) representation of a production sector and an econometric estimation of the price sensitive (own and cross-prices) demands. By introducing the price sensitive demands into the process analysis representation of the production sector, it becomes possible to analyze and plan the pricing policy, the optimal production schedules and capacity expansion plans within a single framework. The computational scheme suggested in the report is based on the iterative approach each of which solves a separable convex programming problem.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.9A
• /
• pp.1273-1281
• /
• 2000

In this paper we studied for multi-user detection system, which hold the merit of CDMA system and can enhance the system capacity. We designed actually realizable quasi-optimal multiuser detection system by use of linear equalizer on the concept that multiuser detection algorithm can be reduced by combining TDMA with CDMA. we call this the hybrid TDMA/CDMA system. And we proposed multiuser detection system, which can use PSAD and MSDD channel estimation method. As a result of performance analysis we acquired equal or much better performance by use of linear multichannel equalizer in the case of not so many user. And on the occasion of many user within cell we can also acquired much better performance in comparison with conventional single user detection system by use of hybrid TDMA/CDMA system.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.9
• /
• pp.4372-4389
• /
• 2019

Spectrum sensing has attracted much attention due to its significant contribution to idle spectrum detection in Cognitive Radio Networks. However, specialized discussion is on complexity-based sensing strategy for spectrum sensing seldom considered. Motivated by this, this paper is devoted to complexity-based sensing strategy for spectrum sensing. Firstly, three efficiency functions are defined to estimate sensing efficiency of a spectrum scheme. Then a novel sensing strategy is proposed given sensing performance and computational complexity. After that, the proposed sensing strategy is extended to energy detector, Cyclostationary feature detector, covariance matrix detector and cooperative spectrum detector. The proposed sensing strategy provides a novel insight into sensing performance estimation for its consideration of both sensing capacity and sensing complexity. Simulations analyze three efficiency functions and optimal sensing strategy of energy detector, Cyclostationary feature detector and covariance matrix detector.

• Ocean and Polar Research
• /
• v.40 no.4
• /
• pp.237-247
• /
• 2018

This study aims to estimate optimal harvests, fishing efforts, and stock levels of hairtail harvested by the large pair bottom trawl, the large otter trawl, the large purse seine, the offshore long line, and the offshore angling fisheries by using the surplus production models and the current value Hamiltonian method. Processes of this study are as follows. First of all, this study estimates the standardized fishing efforts regarding the harvesting of the hairtail by the above five fishing gears based on the general linear model developed by Gavaris. Secondly, this study estimates environmental carrying capacity (k), intrinsic growth rate (r), and catchability coefficient (q) by applying the Clarke Yoshimoto Pooley (CY&P) model among various surplus production models. Thirdly, this study estimates the optimal harvests, fishing efforts, and stock levels regarding the hairtail by the current value Hamiltonian method, including the average landing price, the average unit cost, and the social discount rate. Finally, this study attempts a sensitivity analysis to figure out changes in optimal harvests, fishing efforts, and stock levels due to changes in the average landing price and the average unit cost. As results induced by the current value Hamiltonian method, the optimal harvests, fishing efforts, and stock levels regarding the hairtail caught by several fishing gears were estimated as 33,133 tons, 901,080 horse power, and 79,877 tons, respectively. In addition, from the results of the sensitivity analysis, first of all, if the average landing price of the hairtail constantly increases, the optimal harvests of it increase at a decreasing rate, and then harvests finally slightly decrease as a result of decreases in stock levels. Secondly, if the average unit cost of fishing efforts continuously increases, the optimal fishing efforts decreases, but optimal stock levels increase. Optimal harvests start climbing and then decrease continuously due to increases in the average unit cost. In summary, this study suggests that the optimal harvests (33,133 tons) were larger than actual harvests (25,133 tons), but the optimal fishing efforts (901,080 horse power) were much less than estimated standardized fishing efforts (1,277,284 horse power), corresponding to the average of the recent three years (2014-2016). This result implies that the hairtail has been inefficiently harvested and recently overfished due to excessive fishing efforts. Efficient management and conservation policies on stock levels need to be urgently implemented. Some appropriate strategies would be to include the hairtail in the Korean TAC species or to extend the closed fishing season for this species.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.8
• /
• pp.83-93
• /
• 2013

By comparing Wiener's MMSE on stochastic signal transmission with Shannon's mutual information first proved by C.E. Shannon in terms of information theory, connections between two approaches were investigated. What Wiener wanted to see in signal transmission in noisy channel is to try to capture fundamental limits for signal quality in signal estimation. On the other hands, Shannon was interested in finding fundamental limits of signal quantity that maximize the uncertainty in mutual information using the entropy concept in noisy channel. First concern of this paper is to show that in deriving limits of Shannon's point to point fundamental channel capacity, Shannon's mutual information obtained by exploiting MMSE combiner and Wiener filter's MMSE are interelated by integro-differential equantion. Then, At the meeting point of Wiener's MMSE and Shannon's mutual information the upper bound of spectral efficiency and the lower bound of energy efficiency were computed. Choosing a proper lattice-type code of a mod-${\Lambda}$AWGN channel model and MMSE estimation of ${\alpha}$ confirmed to lead to the fundamental Shannon capacity limits.

• Journal of Korean Society of Transportation
• /
• v.26 no.3
• /
• pp.199-209
• /
• 2008

This paper is described the concepts and limitations for the traditional directional design hour volume estimation. The main objective of this paper is to establish an estimation method of probabilistic directional design hour volume in order to improve the limitation for the traditional approach method. To express the traffic congestion of specific road segment, this paper proposed the link travel time as the probability that the road capacity can accommodate a certain traffic demand at desired service level. Also, the link travel time threshold was derived from chance-constrained stochastic model. Such successive probabilistic process could determine optimal ranked design hour volume and directional design hour volume. Therefore, the probabilistic directional design hour volume can consider the traffic congestion and economic aspect in road planning and design stage. It is hoped that this study will provide a better understanding of various issues involved in the short term prediction of directional design hourly volume on different types of roads.

• Journal of Korean Society of Transportation
• /
• v.26 no.5
• /
• pp.175-184
• /
• 2008

Uncertainties are unavoidable in engineering applications. In this paper we propose an alpha reliable multi-variable network design problem under demand uncertainty. In order to decide the optimal capacity enhancement, three performance measures based on 3E(Efficiency, Equity, and Environmental) are considered. The objective is to minimize the total budget required to satisfy alpha reliability constraint of total travel time, equity ratio, and total emission, while considering the route choice behavior of network users. The problem is formulated as the chance-constrained model for application of alpha confidence level and solved as a lexicographic optimization problem to consider the multi-variable. A simulation-based genetic algorithm procedure is developed to solve this complex network design problem(NDP). A simple numerical example ispresented to illustrate the features of the proposed NDP model.