• 한국안광학회지
• /
• 제18권3호
• /
• pp.241-246
• /
• 2013

목적: 본 연구에서는 프리폼 누진렌즈와 일반 누진렌즈를 착용 하였을 때 원거리 대비감도에 미치는 영향을 비교 분석 하였다. 방법: 안질환이 없는 성인 20명을 대상으로 원거리 대비감도 검사를 실시하였고 5단계의 공간 주파수를 갖는 F.A.C.T.(Stereo Optical, USA)를 이용하였다. 우안, 좌안, 양안 순서로 프리폼 누진렌즈와 일반누진렌즈 대비감도를 측정하였다. 결과: 우안/좌안/양안 대비감도 검사 값이 A(1.5 cpd) 공간주파수에서는 일반 누진렌즈에 비교하여 프리폼 누진렌즈가 16%/17%/11%, B(3 cpd) 공간주파수에서는 11%/5%/5%, C(6 cpd) 공간주파수에서는 6%/6%/9%, D(12 cpd) 공간주파수에서는 19%/16%/13%, E(18 cpd) 공간주파수에서는 4%/3%/18% 높았다. 결론: 원거리 대비감도의 모든 공간주파수 영역에서 프리폼 누진렌즈가 일반 누진렌즈보다 측정값이 높게 측정되었다.

• 한국인터넷방송통신학회논문지
• /
• 제23권6호
• /
• pp.157-162
• /
• 2023

격자 구조형 스트립 방향성 결합기를 기반으로 한 고 민감도 굴절률 bio-sensor를 제안하였다. 그 센서는 도파관 중 하나의 상단 층에 격자 구조가 구성된, 두 개의 비대칭 스트립 도파관을 사용하여 설계하였다. 위상정합 조건을 만족하는 공진 파장에서 한 도파관으로부터 다른 도파관으로 최대 광 결합이 발생하며, 도파관 표면 영역에 놓인 분석물질의 굴절률 변화에 따른 위상정합 조건의 변화가 민감도를 측정하는 척도로 사용될 수 있음을 보여주었다. 제안된 센서는 높은 굴절률 민감도를 가진 on-chip 장치로 설계될 수 있으며, 낮은 전파 손실을 제공하여 민감도가 향상되도록 센서를 구성되었다. 더욱이, 도파관 파라미터에 따른 민감도 변화가 센서의 설계 최적화를 위하여 분석되었다.

• Current Optics and Photonics
• /
• 제5권4호
• /
• pp.444-449
• /
• 2021

A photonic crystal coupled-cavity waveguide created on silicon-on-insulator is designed to act as a refractive-index-sensing device at midinfrared wavelengths around 4 ㎛. To realize high sensitivity, effort is made to engineer the structural parameters to obtain strong modal confinement, which can enhance the interaction between the resonance modes and the analyzed sample. By adjusting some parameters, including the shape of the cavity, the width of the coupling cavity, and the size of the surrounding dielectric columns, a high-sensitivity refractive-index sensor based on the optimized photonic crystal coupled-cavity waveguide is proposed, and a sensitivity of approximately 2620 nm/RIU obtained. When an analyte is measured in the range of 1.0-1.4, the sensor can always maintain a high sensitivity of greater than 2400 nm/RIU. This work demonstrates the viability of high-sensitivity photonic crystal waveguide devices in the midinfrared band.

• 정보저장시스템학회논문집
• /
• 제4권1호
• /
• pp.23-28
• /
• 2008

In this paper we suggested the moving magnet type actuator for optical disc drive which has high frequency of flexible mode. Generally, moving magnet type actuator has the advantage for increase the frequency of flexible mode. But it has low driving sensitivity due to the weight of its moving part. To overcome this shortcoming, we designed the model with the closed electromagnetic circuit for tracking direction. In addition, we improved the driving sensitivity and frequency of flexible mode by using of DOE (design of experiment) procedure for EM circuit. Consequently, it is verified that final designed model satisfied with the desired specifications.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.49-52
• /
• 2003

Two types of ozone monitors using UV absorption method were tried in consideration of cost of the monitor and precision in measuring. The high concentration ozone monitor for high concentration real time ozone monitoring from ozone generator was composed of a low pressure mercury lamp as UV source, a photo multiplier tube as UV detector and signal processing unit for the most part. This structure could be very useful for low price high concentration ozone monitor due to simple system structure and fairly good monitoring characteristics. The developed system showed good linear output characteristics to ozone in the measuring concentration range of 0.05 and 2 wt.%. For accuracy ambient ozone monitoring in ambient in ppm level, the system composed of a high power pulsed xenon lamp as UV source, an optical spectrometer with a high sensitivity linear CCD array as UV detector and signal processing unit in brief speaking was proposed our study for the first time in the world. The developed system showed good linearity and sensitivity in relative low measuring range between 10ppm and 10,000ppm, and showed some feasibility of high resolution ozone monitor using CCD array as photodetector.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문집
• /
• pp.565-569
• /
• 2002

To improve the driving sensitivity of an optical pickup actuator for high density and high speed drive, we present a new actuator design using multipolar flux-density distribution by magnetic materials and Nd-Fe-B sintered magnets. We expect this actuator to use in 3-axis actuator for tilt compensation as well as conventional 2-axis actuator. The electromagnetic field analysis applying 3-D FEM was performed and several samples were actually tested. From comparing simulated data with experimental results, we verified the accuracy of the simulation and the superiority of the presented method.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문집
• /
• pp.1000-1003
• /
• 2002

For high density optical storage, there should be a high NA objective lens and a shorter wavelength laser diode. To secure the disc tilt margin related to the coma aberration, moreover, it's difficult to apply the tilt compensation mechanism into the portable PC. In this paper, we proposed the 3-axis asymmetry pickup actuator with high efficiency symmetric magnetic circuit, which consisted of the top cover type inner yoke for high magnetic flux density, the coil stack unit for the 3-axis independent operation and vertically polarized magnets. This newly suggested actuator features DVD-RAM recording, we achieved the high focus & track AC sensitivity and the greatly stabilized system.

• 한국광학회지
• /
• 제11권4호
• /
• pp.246-249
• /
• 2000

고해상도 원격관측용 카메라오 설계된 비축 3반사 광학계의 제3거울인 타원면(원추계수>0) 형상측정 Null 렌즈를 설계하였다. Null 렌즈 설계방식으로는 측정감도는 2배로 높으면서 작은 기준 평면경을 사용하는 혼합방식을 제안하였다. 혼합방식과 autostigmatic 방식으로 설계한 Null 렌즈의 광파면 왜곡 민감도를 비교하여 혼합방식이 보다 유리한 Null 측정 광학게임을 제시하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문초록집
• /
• pp.358.2-358
• /
• 2002

To improve the driving sensitivity of an optical pickup actuator for high density and high speed drive, we present a new actuator design using multipolar flux-density distribution by magnetic materials and Nd-Fe-B sintered magnets. We expect this actuator to use in 3-axis actuator fur tilt compensation as well as conventional 2-axis actuator. The electromagnetic field analysis applying 3-D FEM was performed and several samples were actually tested. From comparing simulated data with experimental results, we verified theaccuracy of the simulation and the superiority of the presented method.

• Applied Science and Convergence Technology
• /
• 제23권6호
• /
• pp.328-339
• /
• 2014

In this article, plasma monitoring tools and mulivariate analysis techniques were reviewed. Optical emission spectroscopy was reviewed for a chemical composition analysis tool and RF V-I probe for a physical analysis tool for plasma monitoring. Multivariate analysis techniques are discussed to the sensitivity improvement. Principal component analysis (PCA) is one of the widely adopted multivariate analysis techniques and its application to end-point detection of plasma etching process is discussed.