• Korean Journal of Optics and Photonics
• /
• v.3 no.2
• /
• pp.101-104
• /
• 1992

One of coefficients showing the degree of thermal effects is the thermooptic coefficient. It is the ratio of the refractive index change versus the change of temperture and was already measured by other general interferometric method. In this research, an optical system with the electronic speckle pattern interferometer complementing faults of the general interferometer was developed and its potentiality was validated experimentally.

• Design & Manufacturing
• /
• v.2 no.6
• /
• pp.1-6
• /
• 2008

Recently, many researches have been done to improve optical performance of LCD-BLU(Back Light Unit). One of the most important parts in LCD-BLU is LGP(Light Guiding Plate). Micro-patterned LGP is known to have different optical characteristics depending on their shape, pattern density and size, etc. In the present study, a micro-optical patterned LGP mold was fabricated using LiGA process. The difference in the optical characteristics between positive and negative patterned LGP's was investigated by fixing the density, location and size of each pattern. It was found that the negative patterned LGP showed better optical characteristics than positive one.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.10
• /
• pp.76-82
• /
• 1998

As the minimum feature size of a semiconductor chip gets smaller, the inevitable distortion of patterned image by optical lithography becomes the limiting factor in the mass production of VLSI. The optical proximity correction (OPC), which corrects pattern distortion that originates from the resolution limit of optical lithography, is becoming indispensable technology. In this paper, we describe a program that corrects optical proximity effect and thus finds the optimum mask pattern with a Monte-Carlo method. The program was applied to real memory cell patterns to produce mask patterns that generate image patterns closer to object images than original mask patterns, and increase of process margin is expected, as well.

• Journal of Advanced Navigation Technology
• /
• v.12 no.6
• /
• pp.659-665
• /
• 2008

We demonstrate experimentally that the method of Two-pupil optical scanning technique with PAL-spatial light modulator is capable of performing real-time joint transform correlation(JTC) optical system. Optical addressing is achieved by the use of a photosensitive layer of $\alpha$ - Si which controls the electric field across the liquid crystal The demonstrated technique is based on two-pupil optical heterodyne scanning. The method is independent of a spatial light modulator (SLM) in the Fourier plane. We develop the theory of the technique and evaluate a performance of the method by experimentally estimating the correlation between the target image and the reference image.

• Transactions of the Society of Information Storage Systems
• /
• v.6 no.1
• /
• pp.37-40
• /
• 2010

Fresnel lens is a kind of refractive optical lens with various advantages. It has nearly flat shaped optical lens that has small mass. Fresnel lens has number of applications in the compact optical systems. Recently, demands of high quality Fresnel lens for small size optical systems such as illumination units, compact imaging systems, display units, information storage systems, optical detecting units had increased rapidly. Conventional manufacturing process of high quality Fresnel lens is direct machining. However, it is not suitable for mass production because of high cost and long cycle time. Replication method can provide cost effective mass production process. However, there are various issues about replication of Fresnel lens. Fresnel lens has number of sharp blade shape prism. In the replication process, this blade shape causes defects that can affect optical efficiency. In this study, replication processes; injection molding process and UV imprinting process, were developed and evaluated using Fresnel lens that has maximum pattern height of $250\;{\mu}m$ and aspect ratio of 1.5.

• Journal of Integrative Natural Science
• /
• v.2 no.3
• /
• pp.202-206
• /
• 2009

Optical images based on the porous silicon exhibiting photoluminescence have been prepared from an electrochemical etching of n-type silicon wafer (boron-doped,<100> orientation, resistivity $1{\sim}10{\Omega}-cm$) by using a beam projector. The images remained in the substrate displayed an optical images correlating to the optical pattern and could be useful for optical data storage. This provides the ability to fabricate complex optical encoding in the surface of silicon.

• Proceedings of the Korean Magnestics Society Conference
• /
• 1999.04a
• /
• pp.114-115
• /
• 1999

• Proceedings of the Korean Magnestics Society Conference
• /
• 1998.10a
• /
• pp.26-27
• /
• 1998

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.1
• /
• pp.129-135
• /
• 2003

Optical fiber has many advantages, such as high reliability, long lifetime, immunity to the electromagnetic interference, high speed response and low cost. In this study, we proposed and developed an optical fiber impact and pressure sensor for prevention of accident which occurs in the automatic system or auto door. The principle of the sensor is to detect different optical intensity caused by variation of a speckle pattern due to the external perturbation. Speckle pattern appears at the end of a multimode fiber in which coherent beam propagates. The fabricated sensor in this study was tested. As a result of experiments, amplitude of the output signal isn't linear, but it has sufficient sensitivity for a sensor. Moreover, we can control sensitivity of the sensor by an amplifier at receiver. It has several advantages which are ability of detection at all point on the multimode fiber, large sensitive area, and many application areas for a sensing impact and pressure.

• The Research Journal of the Costume Culture
• /
• v.19 no.3
• /
• pp.597-611
• /
• 2011

The purpose of this study is to propose a design method for one-piece dress patterns with high body fitness through an appearance evaluation of one-piece dress patterns with the application of the 3D Virtual Clothing System known as i-designer. Measures consisted of an optical illusion effect in visual imagery and mutual influence according to a change in the length and princess line, in a silhouette of a one-piece dress. The data was assessed by a t-test and a multi-way ANOVA and factor analysis using SPSS 17.0. The results were as follows; The design of the study pattern was done by modifying the ease of the bust circumference, ease of the abdominal circumference, ease of the hip circumference, the position of the side seam line, and the appearance of horizontality in the hem line, which received a low evaluation in appearance evaluations of a one-piece dress pattern. As a result of analyzing the visual image according to a change in the length and princess line, in the form of a silhouette of a one-piece dress, four factors were selected; the whole-body optical illusion factor, the upper-body optical illusion factor, the bust optical illusion factor, and the lower-body optical illusion factor. As a result of analyzing the effect of the interaction in the visual image according to the design variables, the influence of the main effect was found to be great in each factor. In the upper-body optical illusion factor, a significant difference was not noted in the two-way interaction between the length and the princess line. However, the influence on three-way interaction among the length, princess line, and silhouette was significant.