본 논문에서는 Gigabit Ethernet-PON의 상향 트래픽 제어를 위해 기존에 제안되었던 Interleaved polling with Adaptive Cycle Time (IPACT) 방식의 gated service 스케줄링의 성능을 수학적으로 분석하였다. 성능분석 방법은 EPON MAC 프로토콜을 polling system으로 모델링하고, mean value analysis를 사용하였다. Arrival rate λ의 값을 세 구간으로 나누고, 구간마다 의 수학적 분석과정을 제시하였다. 첫 번째 구간은 λ의 값이 매우 작아서 ONU들의 데이터 전송이 거의 없는 구간이고, 두 번째 구간은 λ의 값이 충분히 커서 ONU들의 연속적인 데이터 전송이 일어나는 구간이고, 세 번째 구간은 λ의 값이 매우 커서 ONU들의 버퍼가 항상 포화상태에 있는 구간이다. 분석결과 gated service의 평균 패킷 지연시간과 평균 큐 사이즈, 평균 싸이클 시간 등을 구하고, 수학적 성능분석의 정확성을 검증하기 위해 시뮬레이션을 수행하여 수학적 분석결과와 시뮬레이션 결과를 비교하였다. 이를 통해 수학적 분석결과와 시뮬레이션 결과가 상당히 일치함을 확인하였다. 기존에 IPACT의 성능 평가는 시뮬레이션에만 의존하였는데, 이 방법은 시간과 노력이 많이 필요한 반면, 수학적 성능분석은 성능지표를 단시간 내에 다양하게 구할 수 있어서 시스템 설계에 널리 활용될 수 을 것이라 예상된다. 이때 EPON의 제어 파라미터를 조절함으로써 트래픽 특성에 맞는 시스템을 설계할 수 있다.
본 연구에서는 미세 전자 소자용 절연박막 및 차세대 플렉시블 디스플레이 기판으로서 사용이 기대되는 폴리이미드(PI)에 개환 복분해 중합(ring-opening metathesis polymerization)이 가능한 환형 말단 캡핑제(end-capping agent)인 cis-1,2,3,6-tetrahydrophthalic anhydride(CDBA)로 사슬 말단에 가교 반응이 된 가교형 폴리이미드를 합성하였다. 말단 캡핑제의 조성비에 따른 가교형 폴리이미드 박막의 잔류응력 거동은 thin film stress analyzer(TFSA)를 이용한 wafer bending mothod로 온도에 따라 연속적인 거동을 in-situ로 측정하였다. 열특성은 시차 주사 열량계(DSC), 열기계 분석기(TMA) 및 열 중량 분석기(TGA)를 이용하여 측정하였고, 광학 특성은 자외선/가시광선 분광광도계(UV-vis)와 색차계(spectrophotometer)를 이용하였으며, 네트워크 구조의 모폴로지(morphology) 변화를 통해 해석하였다. 말단 캡핑제의 조성비가 증가함에 따라 잔류응력은 27.9에서 -1.3 MPa로 초저응력 및 향상된 열 특성을 나타내었으나, 광학 특성은 감소됨을 보였다. 가교형 폴리이미드 박막의 우수한 특성 발현은 고집적도 다층 구조의 안정성 및 신뢰도가 요구되는 분야의 응용성이 확대될 것으로 기대된다.
최근 반도체 소자의 고집적화 및 대용량화의 경향에 다라 MOSFET 소자 제작에 이동되는 게이트 산화막의 두께가 수 nm 정도까지 점점 얇아지는 추세이고 Giga-DRAM급 차세대 UNSI소자를 제작하기 위해 5nm이하의 게이트 절연막이 요구된다. 이런 절연막의 두께감소는 게이트 정전용량을 증가시켜 트랜지스터의 속도를 빠르게 하며, 동시에 저전압동작을 가능하게 하기 때문에 게이트 산화막의 두께는 MOS공정세대가 진행되어감에 따라 계속 감소할 것이다. 따라서 절연막 두께는 소자의 동작 특성을 결정하는 중요한 요소이므로 이에 대한 정확한 평가 방법의 확보는 공정 control 측면에서 필수적이다. 그러나, 절연막의 두께가 작아지면서 게이트 산화막과 crystalline siliconrksm이 계면효과가 박막의 두께에 심각한 영향을 주기 때문에 정확한 두께 계측이 어렵고 계측방법에 따라서 두께 계측의 차이가 난다. 따라서 차세대 반도체 소자의 개발 및 양산 체계를 확립하기 위해서는 산화막의 두께가 10nm보다 작은 1nm-5nm 수준의 박막 시료에 대한 두께 계측 방법이 확립이 되어야 한다. 따라서, 본 연구에서는 습식 산화 공정으로 제작된 3nm-7nm 의 게이트 절연막을 현재까지 알려진 다양한 두께 평가방법을 비교 연구하였다. 절연막을 MEIS (Medim Energy Ion Scattering), 0.015nm의 고감도를 가지는 SE (Spectroscopic Ellipsometry), XPS, 고분해능 전자현미경 (TEM)을 이용하여 측정 비교하였다. 또한 polysilicon gate를 가지는 MOS capacitor를 제작하여 소자의 Capacitance-Voltage 및 Current-Voltage를 측정하여 절연막 두께를 계산하여 가장 좋은 두께 계측 방법을 찾고자 한다.다. 마이크로스트립 링 공진기는 링의 원주길이가 전자기파 파장길이의 정수배가 되면 공진이 일어나는 구조이다. Fused quartz를 기판으로 하여 증착압력을 변수로 하여 TiO2 박막을 증착하였다. 그리고 그 위에 은 (silver)을 사용하여 링 패턴을 형성하였다. 이와 같이 공진기를 제작하여 network analyzer (HP 8510C)로 마이크로파 대역에서의 공진특서을 측정하였다. 공진특성으로부터 전체 품질계수와 유효유전율, 그리고 TiO2 박막의 품질계수를 얻어내었다. 측정결과 rutile에서 anatase로 박막의 상이 변할수록 유전율은 감소하고 유전손실은 증가하는 결과를 나타내었다.의 성장률이 둔화됨을 볼 수 있다. 또한 Silane 가스량이 적어지는 영역에서는 가스량의 감소에 의해 성장속도가 둔화됨을 볼 수 있다. 또한 Silane 가스량이 적어지는 영역에서는 가스량의 감소에 의해 성장속도가 줄어들어 성장률이 Silane가스량에 의해 지배됨을 볼 수 있다. UV-VIS spectrophotometer에 의한 비정질 SiC 박막의 투과도와 파장과의 관계에 있어 유리를 기판으로 사용했으므로 유리의투과도를 감안했으며, 유리에 대한 상대적인 비율 관계로 투과도를 나타냈었다. 또한 비저질 SiC 박막의 흡수계수는 Ellipsometry에 의해 측정된 Δ과 Ψ값을 이용하여 시뮬레이션한 결과로 비정질 SiC 박막의 두께를 이용하여 구하였다. 또한 Tauc Plot을 통해 박막의 optical band gap을 2.6~3.7eV로 조절할 수 있었다. 20
본 연구에서는 KOMPSAT-3A 위성영상과 세분류 토지피복지도를 이용한 환경가치등급 분류를 수행하여 국토환경성평가지도의 주기적인 갱신 및 제작 가능성을 제시하였다. 환경성평가지도(ECVAM: Environmental Conservation Value Assessment Map)는 62개의 법제적 평가항목과 8개의 환경·생태적 평가항목을 기준으로 국토의 환경적 가치를 5단계의 등급으로 평가한 지도이며, 1:25000과 1:5000의 두 가지 축척으로 제공되고 있다. 하지만 1:5000 축척의 환경성평가지도는 참조자료의 부재 및 상이한 제작년도 등 다양한 제약조건으로 인해 1년 단위의 느린 갱신주기로 제작되고 있다. 이에 본 연구에서는 KOMPSAT-3A 위성영상과 광학지수(SI: Spectral Indices) 그리고 세분류 토지피복지도를 활용하여 딥러닝 기법 중 하나인 CNN (Convolutional Neural Network)을 기반으로 정확하고 최신정보가 반영된 1:5000 환경성평가지도를 구축 가능성을 확인하고자 한다. 실험 결과, 본 연구에서 제시한 방법으로 제작한 환경성평가지도의 정확도는 각각 87.25%, 85.88%로 산출되었다. 연구의 결과를 통하여 위성영상, 광학지수 그리고 토지피복분류를 활용한 환경성평가지도의 구축 가능성을 확인할 수 있었다.
국토 면적의 약 90%를 차지하는 농촌은 여러가지 공익적 기능을 수행하는 공간으로서 중요성과 가치가 증가하고 있지만 주거지 인근에 축사, 공장, 태양광패널 등 주민생활에 불편을 미치는 시설들이 무분별하게 들어서면서 농촌 환경과 경관이 훼손되고 주민 삶의 질이 낮아지고 있다. 농촌지역의 무질서한 개발을 방지하고 농촌 공간을 계획적으로 관리하기 위해서는 농촌지역 내 위해시설에 대한 탐지 및 모니터링이 필요하다. 주기적으로 취득 가능하고 전체 지역에 대한 정보를 얻을 수 있는 위성영상을 통해 데이터의 취득이 가능하고, 합성곱 신경망 기법을 통한 영상 기반 딥러닝 기술을 활용하여 효과적인 탐지가 가능하다. 따라서 본 연구에서는 의미적 분할(Semantic segmentation)에서 높은 성능을 보이는 U-Net 모델을 이용하여 농촌 지역에서 잠재적으로 위해시설이 될 수 있는 농촌시설을 분류하는 연구를 수행하였다. 본 연구에서는 2020년에 제작된 공간해상도 0.7 m의 KOMPSAT 정사모자이크 광학영상을 한국항공우주연구원으로부터 제공받아 사용하였으며 축사, 공장, 태양광 패널에 대한 AI 학습용 데이터를 직접 제작하여 학습 및 추론을 진행하였다. U-Net을 통해 학습시킨 결과 픽셀 정확도(pixel accuracy)는 0.9739, mean Intersection over Union (mIOU)은 0.7025의 값을 도출하였다. 본 연구 결과는 농촌 지역의 위험 시설물 모니터링에 활용될 수 있으며, 농촌계획 수립에 있어 기초 자료로 활용될 수 있을 것으로 기대된다.
In this paper, I examined what have been researched and determined about preservation strategy and selection of preservation media in the western archival community. Archivists have primarily been concerned with 'preservation' and 'use' of archival materials worth of being preserved permanently. In the new information era, preservation and use of archival materials were faced with new challenge. Life expectancy of paper records was shortened due to acidification and brittleness of the modem papers. Also emergence of information technology affects the traditional way of preservation and use of archival materials. User expectations are becoming so high technology-oriented and so complicated as to make archivists act like information managers using computer technology rather than traditional archival handicraft. Preservation strategy plays an important role in archival management as well as information management. For a cost-effective management of archives and archival institutions, preservation strategy is a must. The preservation strategy encompasses all aspects of archival preservation process and practices, from selection of archives, appraisal, inventorying, arrangement, description, conservation, microfilming or digitization, archival buildings, and access service. Those archival functions should be considered in their relations to each other to ensure proper preservation of archival materials. In the integrated preservation strategy, 'preservation' and 'use' should be combined and fulfilled without sacrificing the other. Preservation strategy planning is essential to determine the policies of archives to preserve their holdings safe and provide people with a maximum access in most effective ways. Preservation microfilming is to ensure permanent preservation of information held in important archival materials. To do this, a detailed standardization has been developed to guarantee the permanence of microfilm as well as its product quality. Silver gelatin film can last up to 500 years in the optimum storage environment and the most viable option for permanent preservation media. ISO and ANIS developed such standards for the quality of microfilms and microfilming technology. Preservation microfilming guidelines was also developed to ensure effective archival management and picture quality of microfilms. It is essential to assess the need of preservation microfilming. Limit in resources always put a restraint on preservation management. Appraisal (and selection) of what to be preserved was the most important part of preservation microfilming. In addition, microfilms with standard quality can be scanned to produce quality digital images for instant use through internet. As information technology develops, archivists began to utilize information technology to make preservation easier and more economical, and to promote use of archival materials through computer communication network. Digitization was introduced to provide easy and universal access to unique archives, and its large capacity of preserving archival data seems very promising. However, digitization, i.e., transferring images of records to electronic codes, still, needs to be standardized. Digitized data are electronic records, and st present electronic records are very unstable and not to be preserved permanently. Digital media including optical disks materials have not been proved as reliable media for permanent preservation. Due to their chemical coating and physical character using light, they are not stable and can be preserved at best 100 years in the optimum storage environment. Most CD-R can last only 20 years. Furthermore, obsolescence of hardware and software makes hard to reproduce digital images made from earlier versions. Even if when reformatting is possible, the cost of refreshing or upgrading of digital images is very expensive and the very process has to be done at least every five to ten years. No standard for this obsolescence of hardware and software has come into being yet. In short, digital permanence is not a fact, but remains to be uncertain possibility. Archivists must consider in their preservation planning both risk of introducing new technology and promising possibility of new technology at the same time. In planning digitization of historical materials, archivists should incorporate planning for maintaining digitized images and reformatting them in the coming generations of new applications. Without the comprehensive planning, future use of the expensive digital images will become unavailable. And that is a loss of information, and a final failure of both 'preservation' and 'use' of archival materials. As peter Adelstein said, it is wise to be conservative when considerations of conservations are involved.
탁도는 부유물질에 의한 빛의 산란 또는 흡수로 인한 수체의 흐림을 나타내는 수치로 수질 관리 분야에서 중요 지표로 활용되고 있다. 탁도는 소규모의 하천에서 변동성이 심할 수 있으며, 이는 국가하천의 수질에 직접적으로 영향을 준다. 따라서 고해상도의 탁도 공간정보 산출은 매우 중요하다. 이 연구에서는 Korea Multi-Purpose Satellite-3 및 -3A (KOMPSAT-3/3A) 영상으로부터 한강 수계 하천의 고해상도 탁도 매핑을 위한 eXtreme Gradient Boosting (XGBoost) 알고리즘 기반의 탁도 산출 모델을 개발하였다. 이를 위해 총 24장의 KOMPSAT-3/3A 영상과 150장의 Landsat-8 영상으로부터 계산된 대기 상단(Top Of Atmosphere, TOA) 반사율을 활용하였으며, Landsat-8 TOA 반사율은 KOMPSAT-3/3A의 관측 파장 대역에 적합하도록 교차검보정을 수행하였다. 국가수질자동관측망에서 측정된 탁도를 탁도 산출 모델의 참조자료로 사용하였고, 입력 변수로는 탁도가 실측된 위치에서의 TOA 분광반사율과 탁도 분석에 널리 이용되어 온 분광지수인 정규식생지수, 정규수분지수, 정규탁도지수, 그리고 Moderate Resolution Imaging Spectroradiometer (MODIS)의 대기 산출물(에어로졸 광학 두께, 수증기량, 오존)을 사용하였다. 또한 고탁도와 저탁도에 대한 KOMPSAT-3/3A TOA 분광반사율을 분석하여 탁도를 설명할 수 있는 새로운 정규탁도지수(new normalized difference turbidity index, nNDTI)를 제안하였고, 이를 탁도 산출 모델에 입력 변수로 추가하였다. XGBoost 기반 탁도 산출 모델은 현장관측 탁도와 비교하여 2.70 NTU의 평균 제곱근 오차(root mean square error, RMSE) 및 14.70%의 정규화된 RMSE(normalized RMSE)를 가지는 탁도를 예측하여 우수한 성능을 보였으며, 이 연구에서 새롭게 제안한 nNDTI가 탁도 산출에 있어 가장 중요한 변수로 사용되었다. 개발된 탁도 산출 모델을 KOMPSAT-3/3A 영상에 적용하여 하천 탁도를 고해상도로 매핑하였으며, 탁도의 시공간적 변동에 대한 분석이 가능하였다. 이 연구를 통하여 고해상도의 정확한 탁도 공간정보 산출에 KOMPSAT-3/3A 영상이 매우 유용함을 확인할 수 있었다.
The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70
The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70