• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.22 no.10
• /
• pp.808-813
• /
• 2009

Indium nitride thin films were deposited by the radio-frequency reactive magnetron sputtering method. The indium target was sputtered by the mixture flow ratio of $N_2$ to Ar, 9:1. The effects of growth temperature on the structural, optical, and electrical properties of the films were investigated. With increasing the growth temperature, the crystallinity of the films was improved, and the crystalline size was increased. The energy bandgap for the film grown at $25^{\circ}C$ was 3.63 eV, and the bandgap showed an increasing tendency on the growth temperature. The carrier concentration, Hall mobility and electrical resistivity of the films depended significantly on the growth temperature and the maximum Hall mobility of $32.3\;cm^2$/Vsec was observed for the film grown at $400^{\circ}C$.

• Proceedings of the KIEE Conference
• /
• 1997.11a
• /
• pp.683-687
• /
• 1997

The purpose of this work is to develop a highly reliable solar cell based on the diamond-like carbon(DLC)/silicon heterojunction. Thin films of DLC have been deposited by employing both filtered cathodic vacuum arc(FCVA) and magnetron plasma-enhanced chemical vapor deposition(m-PECVD) systems. Structural, electrical, and optical properties of DLC films deposited are systematically analyzed as a function of deposition conditions, such as magnetic field, substrate bias voltage, gas pressure, and nitrogen content. The I-V measurement has been used to elucidate the mechanism responsible for the conduction process in the DLC/Si junction. Photoresponse characteristics of the junction are measured and its reliability against temperature and light stresses is also analyzed.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.346.2-346.2
• /
• 2014

To use the GaN based light-emitting diodes (LEDs) as solid state lighting sources, the improvement of light extraction and internal quantum efficiency is essential factors for high brightness LEDs. In this study, we suggested the new materials system of a zinc tin oxide (ZTO) layer formed on blue LED epi-structures to improve the light extraction. ZTO is a representative n-type oxide material consisted of ZnO and SnO system. Moreover, ZTO is one of the promising oxide semiconductor material. Even though ZTO has higher chemical stability than IGZO owing to its SnO2 content this has high mobility and high reliability. After formation of ZTO layer on p-GaN layer by using the spin coating method, structural and optical properties are investigated. The x-ray diffraction (XRD) measurement results show the successful formation of ZTO. The photoluminescence (PL) and absorption spectrum shows that it has 3.6-4.1eV band gap. Finally, the light extraction properties of ZTO/LED chip using electroluminescence (EL) measurement were investigated. The experimental and theoretical analyses were simultaneously conducted.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11b
• /
• pp.108-111
• /
• 2001

ZnO thin films on (001) sapphire substrates have been deposited by pulsed laser deposition(PLD) technique for light emitting device applications. We have controlled the emission intensity of UV and visible light, depending on film thickness and various post-annealing time. UV emission became strong as the thickness of ZnO thin films increased. The intensity of visible light was strong as post-annealing temperature increased. The optical properties of the ZnO thin films were characterized by PL(photoluminescence) and the structural properties of the ZnO were characterized by XRD for the application of ZnO light emission device.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.12
• /
• pp.3061-3065
• /
• 2009

A series of mono- and 1,1'-bis(heteroaryl)-substituted ferrocenes were prepared by employing Frielander reaction of acetyl- and 1,1'-diacetylferrocene with a series of o-aminoaldehydes. Reactions of 1,1'-diacetylferrocene with two equivalents of 1-aminonaphthalene-2-carbaldehyde and 8-aminoquinoline-7-carbaldehyde afforded a mixture of mono- and 1,1'-bis(heteroaryl)-substituted ferrocenes in a ratio of 1 : 3.1 - 3.8, while the reaction with 4-aminoacridine-3-carbaldehyde did not provide any characterizable product presumably due to the redox instability of the product induced by low reduction potential of benzo[b]-1,10-phenanthroline. Structural and optical properties of the compounds prepared were described.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11a
• /
• pp.108-111
• /
• 2001

ZnO thin films on (001) sapphire substrates knave been deposited by pulsed laser deposition(PLD) technique for light emitting device applications. We have controlled the emission intensity of UV and visible light, depending on film thickness and various post-annealing time. UV emission became strong as the thickness of ZnO thin films increased. The intensity of visible light was strong as post-annealing temperature increased. The optical properties of the ZnO thin films were characterized by PL(photoluminescence) and the structural properties of the ZnO were characterized by XRD for the application of ZnO light emission device.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07b
• /
• pp.1030-1033
• /
• 2002

ZnO thin films on (100)p-type silicon substrates have been deposited by pulsed laser deposition(PLD) technique using an Nd:YGA laser with a wavelength of 266nm. The influence of the deposition parameters, such as oxygen pressure, substrate temperature and laser energy density variation on the properties of the grown film, was studied. The experiments were performed for substrate temperatures in the range of $200{\sim}500^{\circ}C$ and oxygen pressure in the range of $10^{-2}{\sim}10^2mTorr$. We investigated the structural, morphological and optical properties of ZnO thin films using X-ray diffraction(XRD), atomic force microscopy(AFM), photoluminescence(PL).

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1992.11a
• /
• pp.49-54
• /
• 1992

Devices of ITO/CdS/CdTe/Te/Al were prepared by Electron-Beam deposition under a vacuum of $7{\times}10^{-6}$[torr]. Optical, Electrical, Structural and Photovoltaic properties of thin film CdS/CdTe at substrate. temperature 300~500[$^{\circ}C$] were also investigated, The structure of CdTe films deposited was of the zincblende type a preferential orientation of the (111) plane parallel to the substrate, the CdTe dark resistivity was about $10^6[{\Omega}cm]$. The conversion, efficiency of the cell increased with increasing substrate temperature. The best-fabricated Cell was a conversion efficiency of 9.1[%].

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.11a
• /
• pp.63-64
• /
• 2005

CdS thin films were fabricated by rf magnetron sputter technique, and annealed in tube furnace using vacuum evaporated $CdCl_2$ layer, In addition, effects of the thickness of $CdCl_2$ layer and the annealing temperature on structural and optical properties of CdS films were investigated. The heat treatment process was carried out by heating the sample in air at $350-500^{\circ}C$ for 20 minute.

• Journal of Integrative Natural Science
• /
• v.3 no.2
• /
• pp.112-116
• /
• 2010

Prepared CdSe nanoparticles were systems, one of the most studied and useful nanostructures. Semiconductor quantum dots (QDs) have been the subject of much interest for both fundamental reseach and technical applications in recent years, due mainly to their strong size dependent properties and excellent chemical processibility. CdSe nanocrystals were synthesized by using sol-gel process. Synthesized CdSe quantum dots were studied to evaluate the optical, electronic and structural properties using UV-absorption, and photoluminescence (PL) measurement. Prepared CdSe nanoparticles were subjected to sense hydrofluoric acid. Photoluminescence was quenched upon adding of hydrofluoric acid.