• 한국전기전자재료학회논문지
• /
• 제18권6호
• /
• pp.582-586
• /
• 2005

We have grown GaN layers with in-situ SiN mask by metal organic chemical vapor deposition (MOCVD) and study the physical properties of the GaN layer. We have also investigate the effect of the SiN mask on its optical property. By inserting a SiN mask, (102) the full width at half maximum (FWHM) decreased from 480 arcsec to 409 arcsec and threading dislocation (TD) density decreased from $3.21\times10^9\;cm^{-2}\;to\;9.7\times10^8\;cm^{-2}$. The PL intensity of GaN with SiN mask improved 2 times to that without SiN mask. We have thus shown that the SiN mask improved significantly the physical and optical properties of the GaN layer.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 춘계학술대회 논문집
• /
• pp.505-508
• /
• 1999

The effect of the heat treatment on electrochromic properties of $MoO_3$ thin films is investigated by studing optical modulation, optical density, response time, and cyclic voltammetry. From the results of XRD analysis, heat-treated at $450^{\circ}C$ in air for 1 hour $MoO_3$ thin films are found to be crystalline while as-deposited film and heat-treated at low temperature (${\leq}300^{\circ}C$) are amorphous. The electrochrornic devices using as-deposited $MoO_3$ films exhibits good electrochromic properties compare to those using the heat treated $MoO_3$ films. It has shown that the heat-treatment affected the stability and the electrochromic properties of $MoO_3$ films.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 C
• /
• pp.1459-1461
• /
• 1996

The optical and electrical properties of High Power AlGaAs/AlGaAs Infrared LED with DDH( Double power Double Hetero Junction) structure are investigated. The high power LED is recently studied in order to apply to high speed communication devices. The power out of AlGaAs/AlGaAs with DDH structure is 13.0[mW], the forward voltage is 1.45[V], and the average decrease rate of power out is about 5[%] after aging test. The optical and electrical properties of DDH structure LED are superior than that of SH structured LED. The DDH structured LED is suitable to the high speed communication devices.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
• /
• pp.178.2-178.2
• /
• 2015

In and Ga doped ZnO (IGZO) films were deposited on 5 nm thick Cu film buffered Polycarbonate (PC) substrates with RF magnetron sputtering and then the effect of Cu buffer layer on the optical and electrical properties of the films was investigated. While IGZO single layer films show the electrical resistivity of $1.2{\times}10-1{\Omega}cm$, IGZO/Cu bi-layered films show a lower resistivity of $1.6{\times}10-3{\Omega}cm$. Although the optical transmittance of the films in a visible wave length range is deteriorated by Cu buffer layer, IGZO films with 5 nm thick Cu buffer layer show the higher figure of merit of $2.6{\times}10-4{\Omega}-1$ than that of the IGZO single layer films due to the enhanced opto-electrical performance of the IGZO/Cu bi-layered films.

• Transactions on Electrical and Electronic Materials
• /
• 제5권3호
• /
• pp.113-119
• /
• 2004

Structural and optical properties of as-synthesized, Ga$_2$O$_3$-coated, and Al$_2$O$_3$-coated GaN nanowires are examined in this paper. GaN nanowires were synthesized by thermal evaporation of ball-milled GaN powders in an NH$_3$ atmosphere. The thermal annealing of the as-synthesized GaN nanowires in an argon atmosphere allows their surfaces to be oxidized, leading to the formation of 2nm-thick Ga$_2$O$_3$ layers. For the oxidized GaN nanowires, the distances between the neighboring lattice planes are shortened, and an excitonic emission band is remarkably enhanced in intensity, compared with the as-synthesized GaN nanowires. In addition, the as-synthesized GaN nanowires were coated cylindrically with Al$_2$O$_3$ by atomic layer deposition technique. Our study suggests that the Al$_2$O$_3$-coating passivates some of surface states in the GaN nanowires.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1995년도 춘계학술대회 논문집
• /
• pp.39-42
• /
• 1995

In this study, PLZT thin films prepared by Sol-Gel method were deposited on ITO glass by spin coating and cryatallized at 750$^{\circ}C$ for 5 min by RTA in oreder to investigate their electrical and optical properties. Although thin film experieneced narrowing their hysteresis loops with increasing La content, E$\sub$c/ and P.sub r/ were higher for thin film than for bulk materials. $\varepsilon$$\sub$r/ and optical transmittance increased with increasing La content.

• 대한전기학회논문지
• /
• 제43권6호
• /
• pp.965-970
• /
• 1994

ZnO transparent conducting oxide thin films have been prepared by Pyrosol deposition method and the effects of the different experimental variables on the electrical resistivity and optical transmittance of the prepared films have been investigated in details. The best film with a resistivity of about 8 X 10S0-2TΩcm and transmittance about 80% has been obtained at the substrate temperature of 4$25^{\circ}C$ by using HS12T+CHS13TOH(1:3) solvent and NS12T carrier gas after annealing at 20$0^{\circ}C$ for 40 minutes in vacuum. Furthermore, We have also found the effect of substrate temperature on crystallographic orientation and surface morphology. Annealing of the as-deposited film in vacuum leads to a substantial reduction in resistivity without affecting the optical transmittance and crystallographic orientation.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.1
• /
• pp.276-279
• /
• 2004

CdS thin films on polymer substrates such as polycarbonate(PC) and polyethylene terephthalat(PET) have many merits such as light weight, small volume and can make the obtained devices folded, easily carried. In present work, CdS thin films on glass, PC, and PET substrates have been prepared by chemical bath deposition. The structural and optical propertied of the films depending on substrate types have been investigated.

• 한국전기전자재료학회논문지
• /
• 제32권2호
• /
• pp.134-140
• /
• 2019

Oxide ($SnO_2$)/metal alloy (Cu(Ni))/oxide ($SnO_2$) multilayer films were fabricated using the magnetron sputtering technique. The oxide and metal alloy were $SnO_2$ and Ni-doped Cu, respectively. The structural, optical, and electrical properties of the multilayer films were investigated using X-ray diffraction (XRD), ultraviolet-visible (UV-vis) spectrophotometry, and 4-point probe measurements, respectively. The properties of the $SnO_2/Cu(Ni)/SnO_2$ multilayer films were dependent on the thickness and Ni doping of the mid-layer film. Since Ni atoms inhibit the diffusion and aggregation of Cu atoms, the grain growth of Cu is delayed upon Ni addition. For $250^{\circ}C$, the Haccke's figure of merit (FOM) of the $SnO_2$ (30 nm)/Cu(Ni) (8 nm)/$SnO_2$ (30 nm) multilayer film was evaluated to be $0.17{\times}10^{-3}{\Omega}^{-1}$.

• 한국전기전자재료학회논문지
• /
• 제22권3호
• /
• pp.277-283
• /
• 2009

In this paper, aluminum doped zinc oxide (ZnO:Al) thin films on plastic substrate such as poly carbonate (PC), polyethylene terephthalate (PET) were prepared by RF magnetron sputtering method for flexible solar cell applications. Effects of the sputter pressure on the structural, electrical and optical properties were investigated. The crystallinity and the degree of the (002) orientation were deteriorated with increasing the sputter pressure. When the sputter pressure was higher, the conductivity of ZnO:Al films was improved because of the high carrier concentration and the Hall mobility. High quality ZnO:Al films with resistivity as low as $1.9{\times}10^{-3}{\Omega}-cm$ and the optical transmittance over 80 % in the visible region have been obtained on PC substrate at 2 mTorr.