• Proceedings of the IEEK Conference
• /
• 2001.06a
• /
• pp.375-378
• /
• 2001

A 640Gb/s very advanced ATM switching system using 0.25um CMOS VLSI, 40 layer ceramic MCM and 10Gb/s, 8 wavelength 8$\times$8 optical WDM interconnection has been fabricated. To break though the interconnection bottleneck, optical WDM interconnection is used. It has 20Gb/s 8 wavelength 8$\times$8 interconnection capability. It realizes 640Gb/s interconnections within a very small size. Preliminary tests show that 800b1s ATM switch MCM and optical WDM interconnection technologies can be applied to future high speed broadband networks

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.5A
• /
• pp.514-520
• /
• 2004

In WDM networt a WDM buffer is one of essential elements for realizing all-optical packet switching system. In this paper, we propose and demonstrate a single loop type all-optical WDM buffer system. The proposed one consists of NOLM and feedback loop, and provides more than 40 turns buffering (more than 20${\mu}\textrm{s}$) for single input pulse (1550nm, width: 20㎱) before selected by control signal pulse (1553nm, width: 30㎱).

• Journal of the Optical Society of Korea
• /
• v.5 no.1
• /
• pp.5-8
• /
• 2001

In this work, we studied the effect of chirped grating on optical bistability in λ/4-shifted semiconductor distributed-feedback(DFB) devices, such as an etalon with nonlinear mirrors, a λ/4-shifted DFB waveguide and aλ/4-shifted DFB laser amplifier. We found that chirped DFB devices exhibit bistable switching at a lower input power.OCIS code : 050.2770, 190.1450, 190.5970, 230.0230.

• Journal of Magnetics
• /
• v.8 no.1
• /
• pp.50-59
• /
• 2003

Spatial light modulators (SLMs) are centrally important devices in volumetric recording, data Processing, Pattern recognition and other optical systems. Various types of reusable SLMs with two-dimensional pixel arrays have been intensively developed. Of these, magneto-optic spatial light modulators (MOSLMs) have advantages of high switching speed, robustness, nonvolatility, and radioactive resistance. In this article, we review recent development work on MOSLMs, mainly in relation to our own studies.

• Journal of Communications and Networks
• /
• v.6 no.2
• /
• pp.147-155
• /
• 2004

In this paper, we propose an efficient sequencing technique, namely minimum Row time scheduling (MFTS), to manage variable-Iength message transmissions for single-hop passive starcoupled WDM optical networks. By considering not only the message length but also the state of the receivers and the tuning latency, the proposed protocol can reduce the average delay of the network greatly. This paper also introduces a new channel assignment technique latency minimizing scheduling (LMS), which aims to reduce the scheduling latency. We evaluate the proposed algorithm, using extensive discrete-event simulations, by comparing its performance with shortest job first (SJF) algorithm. We find that significant improvement in average delay could be achieved by MFTS algorithm. By combining the proposed message sequencing technique with the channel selection technique, the performance of the optical network could be further improved.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.12a
• /
• pp.114-118
• /
• 2006

We investigated the transient electroluminescence (EL) and modulation characteristics of red organic light-emitting diodes (OLEDs), which consist with 4-(dicyanomethylene)-2-i -propyl-6-(1,1,7,7-tetramethyljulolidyl-9-cnyl)-4H-pyran (DCJTI) and rubrene doped into tris(8-hydroxyquinoline)aluminum ($Alq_3$). The transient EL waveforms showed two components, the overshooting peak and constant component, indicating that the excess amount of accumulated charges simultaneously recombine at the onset moment. This overshooting effect reduced the rise time of transient EL and enhanced the optical output of OLEDs when the pulse voltage applied to the device. We demonstrated that the red OLEDs could be use for the high-speed switching application by driving at more than 100 MHz and transmitting the video signals utilized as the electro-optical conversion device

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.6
• /
• pp.61-70
• /
• 1999

An optical switch composed of three-identical, equally-spaced $Ti:LinbO_3$ waveguides and overlaid Al electrodes of CPW structure was designed and fabricated. Patterned Ti was diffused into z-cut $LinbO_3$ substrates at $1025^{\circ}C$ for 6 hours to make a three-waveguide directional coupler. $SiO_2$ buffer layer of $1.2{\mu}m$ was grown by the PECVD to reduce the propagation loss of TM mode, and Al electrodes were built on the layer for switching the guided beam. For an incident beam of ${\lambda}=1.3{\mu}m$, almost perfect optical coupling between two outer waveguides was observed. When an electric field was applied to detune the three waveguides anti-symmetrically, the optical switching phenomenon was successfully confirmed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.12
• /
• pp.2835-2842
• /
• 2013

In this paper, service differentiation scheme using optical buffer that is reduced in size with slow-light technology in optical burst switching networks is presented. In suggested scheme, each outport has buffer to store high-class burst only in case that all its wavelengths are occupied. When all wavelengths are being used, a new arriving high-class burst goes into the buffer and waits until a burst is serviced. As soon as a burst is serviced with a wavelength, the high-class burst at buffer is allocated to the free wavelength. In case that low-class burst is arriving under the same situation, it is not stored at the buffer but discarded. An analytical model is derived to analyze the performance of the suggested scheme and compare its performance with the conventional scheme such as preemption and deflection as well as no service differentiations.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.05a
• /
• pp.813-814
• /
• 2012

Recently, along with a development to promote low-carbon green growth, LED control IT convergence technology that can create environmentally-friendly emotional lighting is receiving attention. This is an interface control technology that includes a multi-sensor, switching technology, LED optics, and Internet-based remote lighting control, all of which utilize the lighting characteristics of LED lighting. The proposed system is a study on an intelligent LED control technology, and aims to use a multi-switching sensor in order to control LED discharge current so as to improve energy-charging method, to use a battery's SoC sensor, and to improve efficiency in the winter according to a section.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.04a
• /
• pp.61-62
• /
• 2009

Electro-optical properties of liquid crystal display (LCD) using fringe-field switching (FFS) devices depend on many parameters such as cell retardation, electrode structure, magnitude and sign of dielectric anisotropy, rubbing angle and cell gap. In this paper, the light efficiency of FFS device depending on magnitude of positive dielectric anisotropy with other cell parameters such as rubbing angle and angle and cell gap have been explored compared with FFS device using LC with negative dielectric anisotropy.