• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2012년도 춘계학술대회
• /
• pp.560-563
• /
• 2012

향후 대용량 정보 제공 서비스를 위한 크루즈 선박 등의 특수 선박용 광 네트워크 모니터링 시스템의 하드웨어와 소프트웨어를 설계 제작하였고, 개발된 광 네트워크 감시 시스템이 선박이라는 특수 상황과 관련있는 이물질이 부착된 광 커넥터, 오접속된 커넥터에 의한 손실 등 2가지의 이벤트를 정확히 모니터링하는지를 실험을 통해 확인해 보았다. 모니터링 시스템의 하드웨어는 선박의 네트워크 구조에 맞는 chained branch와 dark fiber 병합 방식으로 설계 제작하였고, 2가지 이벤트에 대한 감시 시험 결과 3가지 모두 5 m 이내의 범위로 모니터링하는 것을 확인하였다.

• 한국전기전자재료학회논문지
• /
• 제23권12호
• /
• pp.978-982
• /
• 2010

For mass information transfer, the optical communication using optic fiber has been widely used. Especially, in the field of medical image, the large data is digitalized based on the standard image and it is used for telemedicine with this method. Therefore, to transfer the large amount of data fast and effectively POF (Plastic Optical Fiber) can be used and the development of optic connector for connection between POFs is very important. In this study, for stable optical coupling of POF optic fiber Ferrule and Sleeve were designed and produced by considering the bond stability and the insertion loss according to the physical contact and roughness profile was evaluated. As a result of examining the insertion loss by physical contact method of two optic fibers, it showed the loss was about 1.895dB. According to the results from studying the condition of grinding section for POF mass production, the mass production condition was established as POF profile roughness of 6nm and the loss of 0.2dB or lower by controlling the film size and time step by step.

• 한국정밀공학회지
• /
• 제21권5호
• /
• pp.38-45
• /
• 2004

As optical communication is being substituted for telecommunication, the demand of a large variety of fiber optic components is increasing. V-groove substrates, one of the module components, are used to connect optical fibers to optical planar circuits and to arrange fibers. Their applications are multi-channel optical connectors and optical waveguide fiber coupling, etc. Because these substrates are a critical part of the splitter in a multiplexer and a multi fiber connector, precise and reliable fabrication process is required. For precisely aligning core pitch between fibers, machined core pitch tolerance should be within sub-microns. Therefore, these are generally produced by state-of-the-art micro-fabrication like MEMS. However, most of the process equipment is very expensive. It is also difficult to change the process line for custom designs to meet specific requirements using various materials. For various design specifications such as different values of the V angle and low-priced process, the fabrication method should be flexible and low cost. To achieve this goal, we have suggested a miniaturized machine tool with high accuracy positioning system. Through this study, it is shown that this cutting process can be applied to produce V-groove subtracts. We also show the possibility of using a miniaturized machining system for producing small parts.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1993년도 춘계학술대회 논문집
• /
• pp.6-10
• /
• 1993

빛을 통신매체로 사용한 광통신은 저손실, 광대역성, 대용량화등의 장점 때문에 많은 중장거리 통신을 점유하고 있으며, 대형가입자군을 위한 광가입자망이나 LAN등에도 시험적용되고 있다. 따라서 광통신에 있어 광FIBER를 연결시키는 CERAMIC단자를 연구개발하는데 그목적을 두었으며, CERAMIC 단자의 재질로서는 구조재료로 주로 사용되는 ZIRCONIA(psz)를 선정하였으며 또한 정밀성형 및 소결등을 검토하였다.

• 천문학논총
• /
• 제27권3호
• /
• pp.87-93
• /
• 2012

A low-dispersion fiber feed Littrow-mounted grating spectrometer for education was designed and fabricated. The dispersion element is a reflective type blazed grating Edmundoptics NT 46-075 (spatial frequency 600 lines/mm, dimension $30mm{\times}30mm$, blazed angle 8.6 degree). The optical fiber coupler module for optical guiding from telescope to spectrometer is composed of a multi-mode FC connector - FC connector optical fiber patch cord (core/cladding diameter $50{\mu}m/125{\mu}m$) and two 1.25" throw-tube couplers. The lens for collimating and imaging is a general purpose focal length 50 mm camera lens (f/1.8). The device for optical path control is a rectangular prism (size $25mm{\times}25mm$). The imaging camera sensor is a Meade DSI Pro 2 CCD sensor (black and white, $752{\times}582$ pixels and pixel size $8.3{\mu}m{\times}8.6{\mu}m$). Softwares for data logging and analysis consist of Meade Autostar Suite, NIH imagej and Vernier Logger Pro 3. The wavelength coverage range of the spectrometer is 205 nm at central wavelength 550 nm. The wavelength resolution is 1.7 nm.

• 한국통신학회논문지
• /
• 제38A권7호
• /
• pp.592-602
• /
• 2013

본 논문은 광케이블 접속함체 및 광선로 감시 시스템을 다룬다. 기존의 광케이블 접속함체는 B2B, B2C 회선을 개통할 때 현장 작업자들이 접속함체 개.폐시 실시간으로 중앙제어부에서 인지 할 수 있는 시스템이 없었다. 이런 상황의 해결 방법으로 광선로 실시간 상태감시, 광선로 절단 시 경보 발생 및 즉각적인 절단 위치를 탐색, 감시형 접속함체의 개.폐 경보 발생, 광선로의 손실 변화 상태를 주기적으로 측정하는 시스템을 고려할 수 있는데, 본 논문은 광케이블 접속함체 내부에 커넥터와 트레이를 설치하여 작업자들이 이런 소자들을 분리하면 광신호가 차단되어 중앙관제에서 OTDR를 통해 실시간 감지되어 경보를 발생하도록 하는 감시 시스템에 관한 연구이다. 이러한 연구는 신속하고 효과적인 광선로 운용을 통해 망 품질 안정화에 기여 할 수 있다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 춘계학술대회 논문집 센서 박막재료연구회 및 광주 전남지부
• /
• pp.80-81
• /
• 2008

In this paper, we have designed the Anti-Reflection (AR) coating for 850, 1310 nm(multi type) and 1310, 1550 nm(multi type) wavelength ranges on the ferrule facet of special optical connector. The reflectance of the AR coated ferrule facet is designed under 5% for 850, 1310 nm(multi type) and 1310, 1550 nm (multi type). The average return loss of the AR coated ferrule facet is 47.1 dB.

• 한국정밀공학회지
• /
• 제9권3호
• /
• pp.67-72
• /
• 1992

This paper presents the process of manufacturing technology of ceramics ferrule for opitcal fiber connector. Precision zirconia ceramic ferrules is widely for high performance and low cost single mode optical fiber connectors. To polish the hole of the zirconia ceramic ferrule, the wire lapping instrument is developed and the machining experiment is conducted. Through the centerless grinding using diamond wheel the surface roughness of zirconia ceramics ferrule is below the 1$\mu$m Rmax.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.993-998
• /
• 2004

In this paper, the effects of grinding conditions on the surface roughness of $ZrO_2$ ferrule applying to the optical fiber connector were investigated. The mesh number of grindstone, the grinding speed and the time schedule during grinding were regarded as main cutting parameters that have an effect on the surface roughness. And then, optimal combinations for chamfering grinding were obtained by using the Taguchi method. In addition, analytic values for maximum surface roughness ($R_{max}$) estimated by the theoretical equations which were derived from the formative model of surface roughness on the chamfering grinding were compared with those of the experiments.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2003년도 하계학술대회
• /
• pp.346-348
• /
• 2003

본 논문에서는 플라스틱 광섬유용(POF) 광커넥터와 광송수신모듈을 설계. 제작하여 특성을 평가하였다. 650nm와 850nm POF 광커넥터는 광학적, 기계적, 환경적 신뢰성 시험을 통해 안정성을 확증할 수 있었다. POF 광송수신모듈은 1.25Gbps와 155Mbps급의 SC, RJ-45 형태의 구조로 제작되었고, 이를 적용하여 S/W Hub 및 광전 Outlet, Media Converter등을 구현하였다.