• 한국화재소방학회논문지
• /
• 제28권5호
• /
• pp.64-70
• /
• 2014

신경망은 연기입자의 광학적 특징으로부터 화원을 분석할 수 있는 유용한 도구가 될 수 있다. UL268에서 연기감지기 시험에 사용되는 세 가지 화원(종이화원, 목재화원, 인화성 액체화원)들의 광학적 특징으로 신경망을 훈련시켰다. 또한, 소광과 산란을 동시에 측정할 수 있는 연기챔버를 제작하여 연기의 광학적 특징을 얻고 그 결과를 신경망에 입력하였다. 종이화원, 목재화원, 인화성 액체화원을 대상으로 한 실험에서 신경망은 화원을 정확하게 구별하였다. 또한, 종이-목재화원, 종이-인화성 액체화원, 목재-인화성 액체화원과 같은 복합화원을 대상으로 한 실험에서도 화원을 모두 구별하였다.

• 한국전기전자재료학회논문지
• /
• 제11권1호
• /
• pp.57-61
• /
• 1998

In this study, PLZT stock solutions were prepared by Sol-Gel processing after the compositions were selected in the memory region of PLZT bulk phase diagram. PLZT solutions were deposited on the ITO glass substrate by spin-coating method. The thin films were annealed by rapid thermal processing. The electric characteristics, hysteresis loop, C-V characteristics of thin films in the memory region were measured in order to investigate the electrical characteristics of PLZT thin films. In selected compositions the decrease in Zr/Ti ratio led to an increase in dielectric constant and the decrease in remanent polarization and coercieve field which brought about slim hysteresis loop.

• 한국재료학회지
• /
• 제26권11호
• /
• pp.598-603
• /
• 2016

The recent development of electro-optic devices and anticorrosion media has led to the necessity to investigate infrared optical systems with solid-solid interfaces of materials that often have the characteristic of amorphousness. One of the most promising classes of materials for those purposes seems to be the chalcogenide glasses. Chalcogenide glasses, based on the Ge-Sb-Se system, have drawn a great deal of attention because of their use in preparing optical lenses and transparent fibers in the range of 3~12 um. In this study, amorphous Ge-Sb-Se chalcogenide for application in an infrared optical product design and manufacture was prepared by a standard melt-quenching technique. The results of the structural, optical and surface roughness analysis of high purity Ge-Sb-Se chalcogenide glasses are reported after various annealing processes.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1996년도 춘계학술대회 논문집
• /
• pp.284-287
• /
• 1996

In this paper, we investigated the optical coupling characteristics for $K^{+}$ ion-exchanged diffused channel waveguide by using coupled-mode equations. In this case, the optical-power-dividing was observed at the waveguide-type optical coupler with 3[$\mu\textrm{m}$] line-width and, 6[$\mu\textrm{m}$] separation between channel waveguides in which interaction lengths were 1 and 3[mm], respectively, On the basis of that we deformed simulation for $Ag^{+}$ ion-exchanged diffused channel waveguide. As a result of simulation, the optical-power-dividing was shown at the waveguide-type optical coupler wish 3[$\mu\textrm{m}$] line-width, 6[$\mu\textrm{m}$] separation between channel waveguides and 0.11[mm] interaction length.

• 한국정밀공학회지
• /
• 제16권9호
• /
• pp.149-158
• /
• 1999

The modern trends of optical storage devices can be characterized by high density in information recording, and high bandwidth in data input/output processing rate. These make servo engineers to face with a new barrier on control system design in much more difficult way. The first step to attack this barrier will be through a systematic modeling for the dynamic characteristics of optical storage drive. in this paper, an analytical dynamic model for an optical storage drive based on FEM is drived, and compared with experimental results. Through this comparison, a practical dynamic model on the focusing and tracking motion of optical storage drive is proposed for the initiation of real control system design problem.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 추계학술대회논문집
• /
• pp.742-747
• /
• 2000

The optical storage device has recently experienced significant improvements, especially for the aspects of high capacity and fast transfer rate. However, it is the fact that the optical storage device has the lower access time for the randomly scattered data compared to the hard disk drives. It is, therefore, necessary to develop a new type of optical storage system. In this study, we investigate the air bearing characteristics for the optical disk drives which have the swing arm actuator similarly to the hard disk drives. Considering the requirements of the optical disk drives, we parametrize the shape of the air bearing surface and investigate its sensitivity to the flying characteristics for further optimized design outputs.

• 비파괴검사학회지
• /
• 제31권6호
• /
• pp.601-608
• /
• 2011

This paper presents the damage assessment of a building structure by using a novel optical fiber accelerometer system. Especially, a sub-scaled building model is designed and manufactured to check up the feasibility of the optical fiber accelerometer for structural health monitoring. The novel accelerometer exploits the moir$\acute{e}$ fringe optical phenomenon and two pairs of optical fibers to measure the displacement with a high accuracy, and furthermore a pendulum to convert the displacement into acceleration. A prototype of optical fiber accelerometer system has been successfully developed that consists of a sensor head, a control unit and a signal processing unit. The building model is also designed as a 4-story building with a rectangular shape of $200{\times}300$ mm of edges. Each floor is connected to the next ones by 6 steel columns which are threaded rods. Basically, a random vibration test of the building model is done with a shaker and all of acceleration data is successfully measured at the assigned points by the optical fiber accelerometer. The experiments are repeated in the undamaged state and the damaged state. The comparison of dynamic parameters including the natural frequencies and the eigenvectors is successfully carried out. Finally, the optical fiber accelerometer is proven to be prospective to evaluate dynamic characteristics of a building structure for the damage assessment.

• 소성∙가공
• /
• 제11권2호
• /
• pp.103-107
• /
• 2002

With the great demand for WDM (Wavelength Division Multiplexing) optical communications, optical switches are expected to become one of the dominant components in future networks. Conventional mechanical switches suffer from poor reliability and large size; however, many micromachined optical switches with moving mirrors have been proposed for high scale OXC (Optical Crossconnect) or ADM (Add/Drop Multiplex) because of the low power consumption and high reliability of these switches. In this paper, we introduce the technological trends of optical switches using MEMS, related micromachining technologies and their characteristics.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2008년도 동계학술발표회 논문집
• /
• pp.199-200
• /
• 2008

In this paper, we researched optical characteristics of a holographic optical security system using a reflection recording material and optical random phase mask. The system have the property of optical security key with the phase mask. Also, a reflection recording geometry can reduced a size of the reconstruction system because a input beam to reconstruct a holographic image and a diffraction beam are the same side on the material.

• 대한전자공학회논문지
• /
• 제26권12호
• /
• pp.2025-2031
• /
• 1989

In this paper, using optical effect of characteristics of GaAs compound, two potential application of optical controlled GaAs MESFET are demonstrated` detector, microwave amplifier gain control. These lead to the possibility of the interaction with optical devices. The preliminary experiments show the light induced voltage, the increase in the drain currnet and the change in the microwave scattering parameters of GaAs MESFET under optical illumination(He-Ne laser). And imcrowave amplifier gain is round to be varied with changing in intensity of optical illumination.