• 제어로봇시스템학회논문지
• /
• 제14권5호
• /
• pp.467-472
• /
• 2008

In this paper, we design, implement and apply network physical layer to 100 BaseFx optical cable interface module based on industrial ethernet protocol which is physical layer of EtherCAT that has ensure its open standard ethernet compatibility which having been provided with real time of control in network of intelligent service robot, can be process numerous data to sensor and motor control system. Through BLDC motor control performance tests, we try to propose suitability as internal network of intelligent service robot and automation system.

• 산업기술연구
• /
• 제15권
• /
• pp.137-146
• /
• 1995

The reference model for UNI (User Network Interface) of B-ISDN is consisted of three function groups (B-NTI, B-NT2 and B-TE). In this study, we constructed passive B-NT1 module which can be utilized for optical link management and repair, one of main functions of B-NT1. For the convenience of installation and management, this module is only consisted of passive optical devices. And at a local exchange center linked with the module, the broken zone of optic link is able to be monitored without interrupting services. In addition, we performed the power burget analysis for the design of efficient optic link including this module.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.559-560
• /
• 2006

Fiber optic connector, ferrule, is a device to connect and align fiber optics cable on fiber-optic communication system. In general $ZrO_2$ ceramic ferrule is manufactured by grinding process because the demands precision is very high. For the precision grinding machining, it is very important that structure of co-axial ferrule grinding system is optimized. In this paper, Structural analysis was performed to analyze bed and frame structure of co-axial grinding machine. Deformation and modal analysis for natural frequency was performed using ANSYS design space program to analyze structural characteristics. New improved model of bed and frame structure was proposed based on initial basic model. Therefore, we estimated the structural characteristics precision co-axial grinding machining system.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 춘계학술대회 논문집
• /
• pp.1465-1467
• /
• 2004

Compared with other transport means, safety and timeliness are the merits of railways. Unexpectedly when accident happens, much time and human strength are required to cope with the accident. And for swift recovery, systematic rehabilitation is needed. Recently using MTS(Moving picture Transmission System), we can perform accident rehabilitation and recording work efficiently. MTS is the device that transmits continuous picture information from accident field to control center. e are developing the appropriate system to railway situation to make use of the existing information communication technology, processing technology of video-tex, super high speed transmission technology through fiber-optic, copper cable and network description of information Technology, etc. If these communication-based can technologies are applied to railway system, railway managers can control the accident by inspecting the picture of accident field and can contribute to the safe train operation and the improvement of railway management. In this paper, we investigate the connecting methods when optical fiber is used for moving picture data transmission of train accidents, and its problems. And, we validate MTS's performance through about 28km section of field test.

• 한국광학회지
• /
• 제7권4호
• /
• pp.386-389
• /
• 1996

We report on comparative results obtained from harmonically mode-locked laser operations of ring-type and figure-of-eight(F8) type erbium-doped fiber lasers by using a directional-coupler type electro-optic modulator as an active mode-locker. The mode-locked and transform-limited pulses of 10.6 ps width were obtained at harmonics of the fundamental cavity frequency with the F8 type laser while mode-locked laser pulses greater than 15 ps were achieved with the ring type laser.

• ETRI Journal
• /
• 제6권2호
• /
• pp.15-17
• /
• 1984

A long-wavelength ($1. 3\mum$) multimode fiber-optic transmission system has been developed and the field trial system has been installed over 17.3km distance in Daejeon Area by KETRI. The 45Mb/s and 90Mb/s system operate with BER $10^-9$over 17.3km distance, and they successfully operate on the route of 34. 6km length when the fiber cable is simply connected at one end. Average loss of the fiber cable shows 0. 81dB/km including splice loss and the average bandwidth over the 17. 3km distance is 170MHz.

• 한국전자파학회논문지
• /
• 제22권10호
• /
• pp.927-933
• /
• 2011

본 논문에서는 전자 소자 기반의 상용 오실로스코프에 의한 기존의 펄스 신호 측정 방법의 주파수 한계를 극복하기 위하여 전기광학 기반의 측정 방법을 기술하였다. 펄스폭 0.1 ps의 펨토초 레이저와 광다이오드를 사용하여 20 GHz 주파수 범위에 대응되는 전자기 펄스를 발생시키고, 마이크로스트립 선로를 통해 전송되는 전자기 펄스를 검출하기 위하여 전기광학 샘플링 기법을 이용하였다. 마이크로스트립 선로 위의 매우 근접한 거리에서 광학 결정 프로브를 이용하여 비접촉식으로 펄스 신호를 검출하고, 선로의 출력단 펄스 신호를 기존의 오실로스코프로 측정하여 두 측정 결과를 서로 비교하였다.

• 한국컴퓨터정보학회논문지
• /
• 제15권12호
• /
• pp.209-216
• /
• 2010

본 광 분포 온도 측정 시스템은 광섬유 자체를 온도 측정용 센서로 이용하는 시스템으로, 한 가닥의 광섬유만을 포설하여 포설된 주변 전체 온도를 수 천 점으로 측정이 가능한 시스템이다. 분포 측정의 경우 측정 점의 수를 많이 할 경우 측정점당 비용을 기존 센서의 비용 수준으로 절감 할 수 있으며 동시에 한 두 가닥의 광섬유로 전체 센서를 연결 할 수 있는 장점이 있다. 본 논문에서는 일반적으로 통신용으로 사용하는 광케이블 자체를 센서 (optical sensor cable)로 활용하여 최소한 매 1m 간격으로 센서 기능을 할 수 있는 특성을 이용함으로써 각 센서와 수많은 연결선들을 줄이고 시스템은 컴퓨터를 이용하여 데이터저장, 제어나 보관 등 데이터 관리가 용이하며, 실시간 온도 변화에 따른 온도 이력정보를 이용한 실시간 온도 모니터링 시스템을 구축한다.

• 센서학회지
• /
• 제31권1호
• /
• pp.24-30
• /
• 2022

Distributed fiber-optic acoustic·vibration sensing technology is becoming increasingly popular in many industrial and academic areas such as in securing large edifices, exploring underground seismic activity, monitoring oil well/reservoir, etc. Long-range perimeter intrusion detection exemplifies an application that not only detects intrusion, but also pinpoints where it happens and recognizes kinds of threats made along the perimeter where a single fiber cable was installed. In this study, we developed a distributed fiber-optic sensing device that measures a distributed acoustic·vibration signature (pattern) for intrusion detection. In addition, we demontrate the proposed deep learning algorithm and how it classifies various intrusion events. We evaluated the sensing device and deep learning algorithm in a practical testbed setup. The evaluation results confirm that the developed system is a promising intrusion detection system for long-distance and seamless recognition requirements.

• 대한기계학회논문집A
• /
• 제38권3호
• /
• pp.235-241
• /
• 2014

심해 군사 작전에서 유도체의 타격 성능 향상은 모함과 유도체가 광 케이블을 통하여 안정적인 통신을 유지함으로써 가능하다. 이 때 광 케이블은 엉킴 및 절단과 같은 풀림 불량을 방지하기 위해 보호 튜브에 의해 보호된다. 또한 보호 튜브는 전단 핀에 의해 유도체와 연결되며, 전단 핀의 파손에 의해 유도체는 보호 튜브와 분리된다. 따라서 본 연구에서는 유도체 및 보호 튜브를 모델링하고, 유도체의 운동에 따른 보호 튜브의 풀림 거동을 분석하며 전단 핀에 작용하는 동적 하중을 예측한다. 유도체와 보호 튜브는 질점으로 구성하며, 일정 길이 구속으로 연결한다. 전단 핀에 작용하는 하중은 실험 결과와 비교 검증하며, 이를 바탕으로 보호 튜브의 거동을 예측한다.