• Journal of the Korean Institute of Landscape Architecture
• /
• v.31 no.5
• /
• pp.1-10
• /
• 2003

The purpose of this study was to verify the shore margin protection effect of a root system developed from direct sticking of Salix gracilistyla Miq., focusing on the reinforcement of soil shear strength. The materials were 20cm long sticks whose average diameter and weight were 7.52mm and 14.58g respectively, and sandy loam(Sand 60.36%, Silt 28%, Clay 11.64%), whose maximum dry weight(${\gamma}$$_{dmax}$) was 1.59gf/㎤ at the water ratio( $W_{opt}$) 13.8%. The direct shearing test(KS F 2343) was applied to cylindric columms(diameter 132mm) of pure soil and two years old root reinforced soil. At each condition of vertical stress, 10N/$ extrm{cm}^2$, 14.41N/$\textrm{cm}^2$ and 18.82 N/$\textrm{cm}^2$, five soil+root columns were sheared. After shear tests, the root area ratio and soil moisture on the shear plane were measured. The results of this research were as follows: 1. The average of root area ratio was 1.86% and the soil moisture 14.67%. 2. Two years old root system was found to increase the soil shear strength of pure soil in terms of Cohesion(C) and Inner friction Angle($\phi$) as follows. 3. The relationship between root area ratio and the increased shear strength can be presented with the following equation, $\Delta$S ≒ 0.33ㆍ TrㆍAs/A $\Delta$S : Increased Shear Strength Tr : Average Tension Strength of Root, Ar/A : Root Area Ratioioage Tension Strength of Root, Ar/A : Root Area Ratio

• Journal of the Korean Society of Clothing and Textiles
• /
• v.30 no.4 s.152
• /
• pp.531-541
• /
• 2006

The purpose of this study is to examine the semantic structure about the image shown on the product, brand and advertisement and figuring out its features through the correlation among brand images. For the study, nine brands(Guess, Bangbang, ONG, NIX, TBJ, Levi's, OPT, FRJ, Jambangee) as subjects for investigation has been selected and divided into the image of brand(9 brands), product(108 products, 12 pieces for each product) and advertisement(9 points) by the measure of 26 adjective pairs. The survey has been collected on the subject of 540 men and women who live in around Busan city areas and has been taken the statistics. The results on investigating the semantic structures of the product images about jean brands, there are five main factors, such as, individuality, attractiveness, activeness, modernity, hardness & softness. The results on examining the semantic structures of the brand images about jean brands, the factors are attractiveness, activeness, vitality, hardness & softness, fadness. The results on investigating the semantic structure of the advertisement images about jean brands, the factors are attractiveness, individuality, modernity, activeness. The results on the classification of brand images are presented as four groups, the first group is that brand and advertisement image are pretty similar but product image is differential according to brand and the second group, product and advertisement image are similar but brand image is differential. The third group is that product and brand image are similar but advertisement is differential and the fourth group, product, brand and advertisement are similar.

• Korean Journal of Food Science and Technology
• /
• v.9 no.1
• /
• pp.31-35
• /
• 1977

As a study on the acid protease production by Rhizopus japonicus S-62, the culture conditions for the enzyme production and characteristics of the crude enzyme were investigated. The results are summarized as follows: 1. The optimum conditions for solid culture on wheat bran were 48 hrs of culture period and $100{\sim}120%$ addition of tap water. 2. Of the several media, wheat bran medium was the most excellent in the enzyme production. 3. The addition of sucrose, fructose, $NH_4Cl$ and $NaH_2PO_4$ on wheat bran, respectively, increased largely the enzyme production. 4. The optimum pH for the enzyme action was pH $2.4{\sim}2.6$, the optimum temperature was about $40^{\circ}C$, and the stable pH range was $pH\;2.5{\sim}5.0$, the enzyme was stable below $40^{\circ}C$ and was inactivated abruptly above $40^{\circ}C$.

• Journal of the Korean Solar Energy Society
• /
• v.31 no.2
• /
• pp.89-98
• /
• 2011

This study examined the energy performance according to the main design parameters of a solar water heating system for an office building using the life cycle cost (LCC) optimization simulations. The LCC optimization simulations of the system were conducted with TRNSYS and GenOpt employing the Hooke-Jeeves algorithm for cases where water temperature was $60^{\circ}C$ and $50^{\circ}C$. The results showed that for water temperature at $60^{\circ}C$ and $50^{\circ}C$ the global radiation incident on the collector could be decreased by 16.98% and 28.52%, collector useful energy gain could be decreased by 15.04% and 22.59%, energy to load from storage tank could be decreased by 10.86% and 18.06% and AH energy to load could be increased by 16.86% and 38.50% respectively compared to a non-optimized system. The annual average collection efficiency of the collector was increased by 0.88% for $60^{\circ}C$ and 2.78% for $50^{\circ}C$ because of increase of collector slope and decrease of the mass flow rate per collector area. The annual average efficiency of the system was increased by 1.74% and 3.47% compared to the basis system. However, the annual solar fraction of the system was decreased by 6.68% for $60^{\circ}C$ and 11.26% for $50^{\circ}C$ due to decrease of collector area and storage tank volume.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.20 no.4
• /
• pp.135-144
• /
• 2010

Privacy protection can only be achieved by enforcing privacy policies within an enterprise's on and offline data processing systems. There are P-RBAC model and purpose based model and obligations model among privacy policy models. But only these models each can not dynamically deal with the rapidly changing business environment. Even though users are in the same role, on occasion, secure system has to opt for a figure among them who is smart, capable and supremely confident and to give him/her a special mission during a given period and to strengthen privacy protection by permitting to present fluently access control conditions. For this, we propose Integrated Privacy Protection Model based on RBAC. Our model includes purpose model and P-RBAC and obligation model. And lastly, we define high level policy language model based XML to be independent of platforms and applications.

• Restorative Dentistry and Endodontics
• /
• v.19 no.2
• /
• pp.534-548
• /
• 1994

The purpose of this study is to observe the corrosion characteristics of seven dental amalgams (CAULK FINE CUT, CAULK SPHERICAL, OPTALLOY II, DISPERSALLOY, HI VERALOY, TYTIN, VALIANT) through the anodic polarization curve obtained by using a potentiostat. After each amalgam alloy and Hg being triturated, the triturated mass was inserted into the cylindrical metal mold, and condensed by hydrolic pressure(160 kg/$cm^2$). Each specimen was removed from the metal mold. 24 hours after condensation, specimens were polished with the emery paper and stored at room temperature for 1 week. The anodic polarization curves were employed to compare the corrosion behaviours of the amalgam in 0.9% saline solution, Fusayama's artificial saliva, and stimulated parotid saliva at $37^{\circ}C$ with 3-electrode potentiostat. After the immersion of specimen in electrolyte for 1 hour, the potential scan was begun. The potential scan range was. -1700m V ~ + 400m V(vs. S. C. E) in the working electrode and the scan rate was 50m V /sec. The results were as follows, 1. The corrosion potential, the potential of anodic current peak, and transpassive potential in the stimulated parotid saliva shifted to more anodic direction than those in saline solution, and the current density in the stimulated parotid saliva was lower than that in saline solution. Those in Fusayama's artificial saliva was similar to those in stimulated parotid saliva. 2. The anodic polarization profiles in Fusayama's artificial saliva and stimulated parotid saliva indicated a region of slow slope current density, which is extending from the corrosion potential to the potential of anodic current peak, but that in 0.9% saline solution indicated no region of slow slope. 3. The corrosion potentials for CAULK FINE CUT, CAULK SPHERICAL, and OPT ALLOY II had the similarity in 0.9% saline solution, Fusayama's artificial saliva and stimulated parotid saliva, but those for high coper amalgam and VALIANT had no similarity. 4. The current density for TYTIN amalgam in stimulated parotid saliva was the lowest among the others. 5. As for current density, there was no significant difference between palladium enriched VALINAT and other high copper amalgams.

• Clinical and Experimental Reproductive Medicine
• /
• v.2 no.2
• /
• pp.13-26
• /
• 1975

Seven aspects of attitude toward marriage in Korea are examined to better understand present and future marriage patterns. Also, various facets of current marriage practice are compared with attitudes. The study comprises three groups of roughly 600 women each, selected by random sampling from a rural, an urban, and a semi-urban area. A carefully designed and pretested questionnaire was checked for reliability by a reinterview in a 15% subsample. The great majority of Korean women support traditional attitudes that one must or should marry. The small group who recommend that one should not marry are mostly the very young or the never married, whose attitudes still may change. However, there are important and probably predictive shifts in favor of more individual decision, especially among the better educated, the young, and the more urban. Traditional reasons for marriage such as "custom" and procreation are ranked first by a majority, but there is a large shift to more contemporary or liberal desire for companionship and love, also primarily among the better educated, the urban, the young, and the never married. The traditional attitude that parents should have the sole or major role in mate selection is still held by a bare majority; the educated, urban, young, and never married are more liberal. Only 6% opt for each of the two extremes: That the parent alone or the respondent alone should decide. The remainder prefer one of the two middle-of-the-road positions where parent and child together decide. The proportions of respondents who classed specified criteria as moat important for selecting a husband, arranging the criteria in order from traditional to contemporary were: Lineage, etc., 23%; personal attributes, 40%; health and education, 27%; and love, 10%. The changing attitudes are suggested by the fact that love was ranked first by only 3% of the poorly educated rural poulation versus 23% of urban college level and 31% of the urban never married. There has been a substantial rise in the ideal age of marriage over the past twelve or more years, but there also is evidence that the ideal age is at or near a ceiling. Knowledge about legal age of marriage is minimal; the implications of this for proposed legislation are discussed. Three-fifthes to four-fifths of all respondents married husbands of the same religious, residential, and economic backgrounds as themselves. Almost all of them married men of the same or higher educational level. These evidences of traditional influences in mate selection are contrasted with the low priority given some of those items in earlier questions on reasons for marriage and criterion for selecting husband. Contrary to the expressed attitudes as to who should select the husband, we find that marriages of the study sample were stated to be arranged by parents alone in 62%; and in another 23%, the parents made the decision but asked the respondent's views. Such arrangements were most frequent among the rural, the less educated, and the older respondents and less common in the urban and more educated. The implications of these and related findings are discussed.

• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.869-875
• /
• 2009

Safety is a big issue in the construction sites. For safe and secure management, tracking locations of construction resources such as labors, materials, machineries, vehicles and so on is important. The materials, machineries and vehicles could be controlled by computer, whereas the movement of labors does not have fixed pattern. So, the location and movement of labors need to be monitored continuously for safety. In general, Global Positioning System(GPS) is an opt solution to obtain the location information in outside environments. But it cannot be used for indoor locations as it requires a clear Line-Of-Sight(LOS) to satellites Therefore, indoor location monitoring system could be a convenient alternative for environments such as tunnel and indoor building construction sites. This paper presents a case study to investigate feasibility of Wi-Fi based indoor location monitoring system in construction site. The system is developed by using fingerprint map of gathering Received Signal Strength Indication(RSSI) from each Access Point(AP). The signal information is gathered by Radio Frequency Identification (RFID) tags, which are attached on a helmet of labors to track their locations, and is sent to server computer. Experiments were conducted in a shield tunnel construction site at Guangzhou, China. This study consists of three phases as follows: First, we have a tracking test in entrance area of tunnel construction site. This experiment was performed to find the effective geometry of APs installation. The geometry of APs installation was changed for finding effective locations, and the experiment was performed using one and more tags. Second, APs were separated into two groups, and they were connected with LAN cable in tunnel construction site. The purpose of this experiment was to check the validity of group separating strategy. One group was installed around the entrance and the other one was installed inside the tunnel. Finally, we installed the system inner area of tunnel, boring machine area, and checked the performance with varying conditions (the presence of obstacles such as train, worker, and so on). Accuracy of this study was calculated from the data, which was collected at some known points. Experimental results showed that WiFi-based indoor location system has a level of accuracy of a few meters in tunnel construction site. From the results, it is inferred that the location tracking system can track the approximate location of labors in the construction site. It is able to alert the labors when they are closer to dangerous zones like poisonous region or cave-in..

• Journal of Animal Science and Technology
• /
• v.60 no.5
• /
• pp.14.1-14.12
• /
• 2018

Background: Sheep production is a major component of the livestock sector in Ethiopia. The country owing to the large population of 30.70 million estimated numbers of sheep in the country and out of which about 72.14% are females, and 27.86% are males with diverse genetic resources. The real value of indigenous breeds was often under-estimated mostly due to their poor appearance and relatively low productivity. Developing countries in most cases opt for exotic breeds to increase animal productivity through crossbreeding or breed substitution without properly investigating the production potential of the indigenous breeds. The main objective of the research was to identify sheep flock composition and structure, farmers' traits of interest and breeding objective of Wollo highland sheep, and their $F_1$ crossbreed progenies. Results: Smallholder farmers' flock synthesized from breeding ewes, breeding rams, pre-weaned ewe lambs, pre-weaned ram lambs, unproductive ewes, castrated and fattened rams, with the percentage coverage of 29.2, 13.3, 15.5, 16.5, 12.4, and 12.5%, respectively. The maximum number of flock size was 289.0 sheep per flock and higher in the third stratum. The off-take rate percentage of the three strata presented as 21.9% in 1st stratum, 12% in the 2nd stratum, and 16.4% in the 3rd stratum and higher off-take rate recorded in the first stratum. Sheep producer's traits of interest ranked by growth rate (first), body size (second) and marketing value was third rank. Communal breeding (random mating), village based controlled breeding, mixed type and private ram controlled breeding practice were comprised of 39.7, 61.7, 52 and 71.3%, respectively. The percentages of ewes per flock composition were presented as 36.5, 27.1 and 25.5%, respectively in the 3rd stratum, 2nd stratum and 3rd stratum in the order of their importance's. Conclusion: Genetic improvement practices at smallholder sheep producers situation was showing promising outcome with indigenous Washera $F_1$ crossbred lambs and which designated for weaning rate, body size, marketing age, age at first lambing, good temperament and large litter size in the order of their rank. The contemporary breeding practice tendency indicated that, reduced flock size to improve flock productivity via crossbreeding practices.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.1
• /
• pp.75-84
• /
• 2017

The prolonged economic slowdown has forced many youths to opt for starting a business instead of seeking employment. Universities have shown their interest in startup training by opening startup courses and encouraging relevant student communities, while at the same time helping their students land a job. Along with this, the government has been implementing various policies through creative economy and youth startup initiatives, but the resulting quantitative growth has not been supported by a commensurate level of qualitative growth and this has created problems on the supplier side, such as by producing redundant functions and roles in multiple projects and inefficient investment. This study, which aims at proposing a direction towards more active support and thus helping the government achieve qualitative accomplishments that can match its effort in terms of quantitative growth, analyzes the current status of startup support of universities in Korea by examining the data regarding training programs and projects, and highlights the issues stemming from startup organizations in colleges. It also suggests solutions for improving in-college startup training and establishing an interlinked system among the relevant bodies in and out of college, with the hope that the results and alternatives proposed in this study will be utilized as the basis for more active student startup support activities.