• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.788-791
• /
• 2010

We design 64-bit ROM IP for RFID tag chips using printed CMOS non-volatile memory IP design technology for a printed CMOS process. The proposed 64-bit ROM circuit is using ETRI's $0.8{\mu}m$ CMOS porocess, and is expected to reduce process complexity and cost of RFID tag chips compared to that using a conventional silicon fabrication based on a complex lithography process because the poly layer in a gate terminal is using printing technology of imprint process. And a BL precharge circuit and a BL sense amplifier is not required for the designed cell circuit since it is composed of a transmission gate instead of an NMOS transistor of the conventional ROM circuit. Therefore an output datum is only driven by a DOUT buffer circuit. The Operation current and layout area of the designed ROM of 64 bits with an array of 8 rows and 8 columns using $0.8{\mu}m$ ROM process is $9.86{\mu}A$ and $379.6{\times}418.7{\mu}m^2$.

• Journal of the Korean Institute of Gas
• /
• v.18 no.5
• /
• pp.72-77
• /
• 2014

It is known that there is no demand for building the arctic environment in Korea. However, it is important to use the different energy source instead of fuel source due to global warming. It is now demanded of using gas of Alaska and Siberia for long term developing the natural gas. The design of gas pipelines in Korea is very different from the arctic region. The operation of gas in arctic region have to consider of arctic region such as permafrost and active regions. It is needed to understand of gas pipeline design with different arctic soil properties. Nowadays, the pipelines is designed with stress-based and but there is demanded for strain based design with more deformed pipeline. We study of arctic environment with different active region using Finite Element Method of thermal elasto-plastic analysis.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.176-176
• /
• 2007

Flat-panel direct conversion detectors used in compound substance of semiconductor are being studied for digital x-ray imaging. Recently, such detectors are deposited by physical vapor deposition(PVD) generally. But, most of materials (HgI2, PbI2, TlBr, PbO) deposited by PVD have shown difficult fabrication and instability for large area x-ray imaging. Consequently, in this paper, we propose applicable potentialities for screen printing method that is coated on a substrate easily. It is compared to electrical properties among semiconductors such as $HgI_2$, $PbI_2$, PbO, HgBrI, InI, and $TlPbI_3$ under investigation for direct conversion detectors. Each film detector consists of an ~25 to $35\;{\mu}m$ thick layer of semiconductor and was coated onto the substrate. Substrates of $2cm{\times}2cm$ have been used to evaluate performance of semiconductor radiation detectors. Dark current, sensitivity and physics properties were measured. Leakage current of $HgI_2$ as low as $9pA/mm^2$ at the operation bias voltage of ${\sim}1V/{\mu}m$ was observed. Such a value is not better than PVD process, but it is easy to be fabricated in high quality for large area x-ray Imaging. Our future efforts will concentrate on optimization of growth of film thickness that is coated onto a-Si TFT array.

• Archives of Plastic Surgery
• /
• v.38 no.4
• /
• pp.415-420
• /
• 2011

Purpose: The reconstruction of a soft tissue defect of the heel pad can be challenging. One vital issue is the restoration of the ability of the heel to bear the load of the body weight. Many surgeons prefer to use local flaps or free tissue transfer rather than a skin graft. In this study, we evaluated the criteria for choosing a proper flap for heel pad reconstruction. Methods: In this study, 23 cases of heel pad reconstruction were performed by using the flap technique. The etiologies of the heel defects included pressure sores, trauma, or wide excision of a malignant tumor. During the operation, the location, size and depth of the heel pad defect determined which flap was chosen. When the defect size was relatively small and the defect depth was limited to the subcutaneous layer, a local flap was used. A free flap was selected when the defect was so large and deep that almost entire heel pad had to be replaced. Results: There was only one complication of poor graft acceptance, involving partial flap necrosis. This patient experienced complete recovery after debridement of the necrotic tissue and a split thickness skin graft. None of the other transferred tissues had complications. During the follow-up period, the patients were reported satisfactory with both aesthetic and functional results. Conclusion: The heel pad reconstructive method is determined by the size and soft-tissue requirements of the defect. The proper choice of the donor flap allows to achieve satisfactory surgical outcomes in aesthetic and functional viewpoints with fewer complications.

• Journal of Chest Surgery
• /
• v.31 no.5
• /
• pp.549-551
• /
• 1998

Although dysphagia in patients with acute leukemia is usually related to reflux esophagitis, infectious esophagitis, chemotherapy1) and leukemic infiltration2), acute esophageal stricture resulting from chemotherapy in the patient with leukemia is very rare. A 40-year-old man with acute myelogenous leukemia was admitted for operation of esophageal stricture which was developed within 1 month of chemotherapy. An esophagectomy and esophagogastrostomy with pyloroplasty was carried out. Histology showed mucosal infiltration of mononuclear cells and transmural fibrosis involving submucosa and the muscle layer.

• Journal of Korean Society on Water Environment
• /
• v.21 no.3
• /
• pp.242-247
• /
• 2005

In this study, we investigated the removal efficiencies of pollutants and permeate fluxes depending on chemistry of feed water, various molecular weight cut-offs (MWCOs) and materials of membrane, operating pressure. We used seven MWCO membranes of YC0.5, YM1, YM3, YM10, YM30, YM100 and PM30, humic acid solution and surface water as feed water, and examined variation in permeate flux. Results of TOC removal experiment demonstrate that MWCO lower 1,000daltons could remove humic acid effectively. As increasing solution pH and decreasing divalent cations ($Ca^{2+}$) concentration, TOC removal increased. But $UV_{254}$ removal efficiency increased with higher divalent cation concentration and solution pH. Membrane fouling increased with increasing electrolyte (NaCl), divalent cation concentration and decreasing solution pH. In spite of initial permeate flux of the hydrophobic membrane (PM30) was higher than that of the hydrophilic membrane (YM30), flux decline of PM30 was significant during operation. At higher operating pressure, compactness of the cake layer on the membrane surface increased, resulting in gradual increase in hydraulic resistance.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2013.10a
• /
• pp.763-764
• /
• 2013

A three-dimensional image capturing device and its signal processing algorithm and apparatus are presented. Three dimensional information is one of emerging differentiators that provides consumers with more realistic and immersive experiences in user interface, game, 3D-virtual reality, and 3D display. It has the depth information of a scene together with conventional color image so that full-information of real life that human eyes experience can be captured, recorded and reproduced. 20 Mega-Hertz-switching high speed image shutter device for 3D image capturing and its application to system prototype are presented[1,2]. For 3D image capturing, the system utilizes Time-of-Flight (TOF) principle by means of 20MHz high-speed micro-optical image modulator, so called 'optical resonator'. The high speed image modulation is obtained using the electro-optic operation of the multi-layer stacked structure having diffractive mirrors and optical resonance cavity which maximizes the magnitude of optical modulation[3,4]. The optical resonator is specially designed and fabricated realizing low resistance-capacitance cell structures having small RC-time constant. The optical shutter is positioned in front of a standard high resolution CMOS image sensor and modulates the IR image reflected from the object to capture a depth image (Figure 1). Suggested novel optical resonator enables capturing of a full HD depth image with depth accuracy of mm-scale, which is the largest depth image resolution among the-state-of-the-arts, which have been limited up to VGA. The 3D camera prototype realizes color/depth concurrent sensing optical architecture to capture 14Mp color and full HD depth images, simultaneously (Figure 2,3). The resulting high definition color/depth image and its capturing device have crucial impact on 3D business eco-system in IT industry especially as 3D image sensing means in the fields of 3D camera, gesture recognition, user interface, and 3D display. This paper presents MEMS-based optical resonator design, fabrication, 3D camera system prototype and signal processing algorithms.

• Journal of Korea Multimedia Society
• /
• v.5 no.4
• /
• pp.393-398
• /
• 2002

The conventional bit allocation scheme for MPEG-1 audio encoding searches the subband with minimum MNR(mask-to-noise ratio) repetitively until its operation is completed, which occupies most of its total computational complexity. In this paper, as a computationally efficient approximation of it, we propose a new bit allocation scheme with a simple subband search and compare it with the existing schemes[1][2] in terms of the computational complexity and sound quality. For the performance comparison, we used the pop music signal contained in SQAM(sound quality assess material) CD from EBU. Simulation results show that the computational complexity of the proposed method is about 42% of that of the existing one in [1] and the sound quality difference in terms of MNR between the two schemes is within the 0.2 ㏈, for the case of using the layer II at the bit rate of 128 kbps.

• The KIPS Transactions:PartA
• /
• v.15A no.6
• /
• pp.335-344
• /
• 2008

We propose an adaptive garbage collection technique for hybrid flash memory which has both SLC and MLC. Since SLC area is fast and MLC area has low cost, the proposed scheme utilizes the SLC area as log buffer and the MLC area as data block. Considering the high write cost of MLC flash, the garbage collection for the SLC log buffer moves a page into the MLC data block only when the page is cold or the page migration invokes a small cost. The other pages are moved within the SLC log buffer. Also it adjusts the parameter values which determine the operation of garbage collection adaptively considering I/O pattern. From the experiments, we can know that the proposed scheme provides better performance compared with the previous flash management schemes for the hybrid flash and finds the parameter values of garbage collection close to the optimal values.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.2
• /
• pp.279-286
• /
• 2021

Recently, the effort of enterprises are visualized to correspond for 4th industrial revolution and climate change. Reaching the operation of industrial facilities are one of these efforts and is actively progressing under identical condition between real and virtual world through introduction of cyber-physical system (CPS). However, the problem on no unified definition for CPS still exists. Thus, in this paper, we review the previous concept of CPS. We propose new concept of CPS with four sections such as real world section, communication section, virtual world section and management section. We also propose definite concept by classifying the layer of each section. In order to confirm the possibility of application for proposed concept of CPS, we applied simple motor. We compare the result for torque between real motor and virtual motor. Finally we confirm that the applicability of proposed concept of CPS is very high.