• Journal of the Optical Society of Korea
• /
• v.14 no.3
• /
• pp.260-265
• /
• 2010

This paper proposes a transflective configuration of the dual operating mode liquid crystal display, which has transmissive dynamic and reflective memory parts in its pixel. By employing a wideband structure and optimizing the cell-gap of the liquid crystal layer, the reflective memory part shows a very low reflectance in the dark state, good dispersion properties for the entire visible range, as well as high reflectance in the bright state. The transmissive dynamic part is designed to have the same cell-gap and rubbing direction as those of the reflective part. The driving voltage of the dynamic part and transmittance of the bright state can also be controlled by using compensation film with a positive a-plate, which can compensate the reflective part. Experimental results in the memory part operation demonstrate that the contrast ratio is over 50:1 and the reflectance in the dark state is reduced to 56% on average of that of the conventional dual mode configuration for the entire visible range. The contrast ratio of the dynamic part is 300:1.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.20 no.43
• /
• pp.211-218
• /
• 1997

Since Industrial Revolution, the sudden industrialization and population explosion have brought about a serious environmental pollution on the air of the earth, the quality of water and the soil, and the greenhouse effect by the destruction of the ozone layer and the greenhouse gas, the organism diversity decline, the desertification by the ruining of woods and the overall global environmental pollution such as the contamination of the ocean and rivers have been come to the front. So the new recognition on the environment is being spreaded in construction business and the efforts for certification acquisition of ISO 14000 being followed by ISO 9000 are progressing, Accordingly, with an example of H Company where integration system is built so that it can minimize the efforts and cost at the construction of the management system, operation and management after the fact, this paper shall suggest the practical scheme of 3 steps through a study to integrate both existing quality management system and new environmental management system. As the integration system of the quality and environment which is constructed by this method is executed, the number of the established and managed document is cut by about a third and so the disorder to encounter between these documents is prevented and unnecessary efforts is reduced in constructing a system, consequently the efficiency of the system is accomplished. Also as the dualization of quality management system and environmental management system additionally needs more men and money after certification acquisition, the non-construction of the integration system may give rise to a cause to aggravate the burden of the company and hereafter when a new system is imported, it may be very difficult to integrate the system. This system integration enables a efficient and effective system to be constructed , operated , and managed after the fact.

• Journal of the Korean Vacuum Society
• /
• v.19 no.2
• /
• pp.155-160
• /
• 2010

The effect of process temperature of a final annealing step in the fabrication of phase change memory (PCM) devices was investigated. Discrete PCM devices employing $Ge_2Sb_2Te_5$ (GST) films as an active element were made in a pore-style configuration, and they were annealed at various temperatures ranging from 160 to $300^{\circ}C$. The behaviors of cell resistance change from SET resistance to RESET resistance were totally different according to the annealing temperatures. There was a critical annealing temperature for the fabrication of normal PCM devices and abnormal operations were observed in some devices annealed at temperatures lower or higher than the critical temperature. Those influences of annealing temperature seem closely related to the thermal stability of a top electrode/GST/heating layer multilayer structure in the PCM devices.

• Korean Journal of Materials Research
• /
• v.10 no.4
• /
• pp.301-304
• /
• 2000

A new triode type Co-silicided Si FEA(field emitter array) was realized by Co-silicidation of Co coated Si FEA and its field emission properties were investigated. The field emission properties of the fabricated device through the unit pixel with $45{\times}45$ tip array in the area of $250{\mu\textrm{m}}{\times}250{\mu\textrm{m}}$ under high vacuum condition of $10^{-8}Torr$ were as follows : the turn-on voltage was about 35V and the anode current was about $1.2\mu\textrm{A}(0.6㎁/tip)$ at the bias of $V_A=500V\;and\; V_G=55V$. The fabricated device showed the stable electrical characteristics without degradation of field emission current for the long term operation except for the initial transient state. The low turn-on voltage and the high current stability of the Co-silicided Si FEA were due to the thermal and chemical stability and the low work function of silicide layer formed at the surface of Si tip.

• Convergence Security Journal
• /
• v.12 no.3
• /
• pp.75-83
• /
• 2012

Recent science technology research network moves to establish logical private network among specific research groups such as high energy physics and climate, requiring to implement private network by group for each purpose. Up to now, national research networks such as KREONET service high capacity logical private networks. Therefore standardized configuration and management scheme is essential for the deployment of logical private network. In this study, we propose the core service element and protocols for the logical networks over Layer 2 networks. We also propose system architecture that make monitoring and management easier. After that we design and implement monitoring map for logical network based on scheme. For this purpose, we also propose the description system for logical research network to provide data such as operation information, formation information, performance information and failure information of network infrastructure resource.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.7
• /
• pp.1462-1470
• /
• 2003

According to the necessity about information security as well as the advance of IT system and the spread of the Internet, a variety of cryptography algorithms are being developed and put to practical use. In addition the technique about cryptography attack also is advanced, and the algorithms which are strong against its attack are being studied. If the linear transformation matrix in the block cipher algorithm such as Substitution Permutation Networks(SPN) produces the Maximum Distance Separable(MDS) code, it has strong characteristics against the differential attack and linear attack. In this paper, we propose a new algorithm which cm estimate that the linear transformation matrix produces the MDS code. The elements of input code of linear transformation matrix over GF$({2_n})$ can be interpreted as variables. One of variables is transformed as an algebraic formula with the other variables, with applying the formula to the matrix the variables are eliminated one by one. If the number of variables is 1 and the all of coefficient of variable is non zero, then the linear transformation matrix produces the MDS code. The proposed algorithm reduces the calculation time greatly by diminishing the number of multiply and reciprocal operation compared with the conventional algorithm which is designed to know whether the every square submatrix is nonsingular.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.11C
• /
• pp.1491-1497
• /
• 2004

The psychoacoustic model in MPEG audio layer-III (MP3) encoder is optimized for the fixed-point processing. The optimization process consists of determining the data word length of arithmetic unit and the algorithm for transcendental functions that are often used in the psychoacoustic model. In order to determine the data word length, we defined a statistical model expressing the relation between the fixed-point operation errors of the psychoacoustic model and the probability of alteration of the allocated bits doe to these errors. Based on the simulations using this model, we chose a 24-bit data path and constructed a 24-bit fixed-point MP3 encoder. Sound quality tests using the constructed fixed-point encoder showed a mean degradation of -0.2 on ITU-R 5-point audio impairment scale.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.8
• /
• pp.798-804
• /
• 2009

A high-resolution electro-optical camera system, EOS-C, is under development in Satrec Initiative. This system is the mission payload of a 400-kg Earth observation satellite. We designed this system to give improved opto-mechanical and thermal performance compared with a similar camera system to be flown on the DubaiSat-1 system. The thermal control subsystem (TCS) of the EOS-C system uses heaters to meet the opto-mechanical requirements during in-orbit operation and it uses different thermal coating materials and multi-layer insulation (MLI) blankets to minimize the heater power consumption. We performed its thermal analysis for the mission orbit using a thermal analysis model and the result shows that its TCS satisfies the design requirements.

• Smart Media Journal
• /
• v.5 no.3
• /
• pp.35-41
• /
• 2016

In this paper, we propose hand-gesture signal recognition based on EPS(Electronic Potential Sensor) using Deep learning model. Extracted signals which from Electronic field based sensor, EPS have much of the noise, so it must remove in pre-processing. After the noise are removed with filter using frequency feature, the signals are reconstructed with dimensional transformation to overcome limit which have just one-dimension feature with voltage value for using convolution operation. Then, the reconstructed signal data is finally classified and recognized using multiple learning layers model based on deep learning. Since the statistical model based on probability is sensitive to initial parameters, the result can change after training in modeling phase. Deep learning model can overcome this problem because of several layers in training phase. In experiment, we used two different deep learning structures, Convolutional neural networks and Recurrent Neural Network and compared with statistical model algorithm with four kinds of gestures. The recognition result of method using convolutional neural network is better than other algorithms in EPS gesture signal recognition.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.8
• /
• pp.33-39
• /
• 2005

The maximum output torque and power developed by the machine is ultimately depended on the allowable inverter current rating and maximum voltage which the inverter can supply to the machine. Therefore, considering the limited voltage and current capacities, it is desirable to consider a control method which yields the best possible torque per ampere. In this paper, we propose fuzzy neural network(FNN) controller that combines a fuzzy control and the neural network for high performance control of induction motor drive. This controller composes antecedence of the fuzzy rules and consequence by a clustering method and a multi-layer neural networks. This controller is compounding of advantages that robust control of a fuzzy control and high-adaptive control of the neural networks. Also, this paper is proposed control of maximum torque per ampere(MTPA) of induction moor. This strategy is reposed which is simple in structure and has the honest goal of minimizing the stator current magnitude for given load torque. The performance of the proposed induction motor drive with maximum torque control using FNN controller is verified by analysis results at dynamic operation conditions.