• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.13 no.5
• /
• pp.81-86
• /
• 2004

A fundamental study for developing a system of fault diagnosis of a pump is performed by using neural network. The acoustic signals were obtained and converted to frequency domain for normal products and artificially deformed products. The signals were obtained in various driving frequencies in order to obtain many types of data from a limited number of pumps. The acoustic data in frequency domain were managed to multiples of real driving frequency with the aim of easy comparison. The neural network model used in this study was 3-layer type composed of input, hidden, and output layer. The normalized amplitudes at the multiples of real driving frequency were chosen as units of input layer. Various sets of teach signals made from original data by eliminating some random cases were used in the training. The average errors were approximately proportional to the number of untaught data. The results showed neural network trained by acoustic signals can be used as a simple method for a detection of machine malfuction or fault diagnosis.

• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.1123-1126
• /
• 1999

In this paper, we propose a real-time implementation of the MPEG-1 layer III and MPEG-2 layer III LSF audio decoding system based on OAK DSP Core. In order to solve the problem of resolution, the system has been used floating-point operation and double precision in dequantization module. The size of ROM is reduced by using the Run-length algorithm of reordered index. The subband synthesis filter module is optimized to have low computational complexity in terms of the size of ROM or RAM. To construct a efficient system, we used both the DSP Core and Parser-Huffman decoder which is implemented with VHDL.

• Progress in Superconductivity and Cryogenics
• /
• v.18 no.1
• /
• pp.33-36
• /
• 2016

Suppression of the superconducting transition temperature ($T_c$) of NbN thin films in superconductor/ferromagnet multilayers has been investigated. Both superconducting NbN and ferromagnetic FeN layers were deposited on thermally oxidized Si substrate at room temperature by using reactive magnetron sputtering in an $Ar-N_2$ gas mixture. The thickness of FeN films was fixed at 20 nm, while the thickness of NbN films was varied from 3 nm to 90 nm. $T_c$ suppression was clearly observed in NbN layers up to 70 nm thickness when NbN layer was in proximity with FeN layer. For a given thickness of NbN layer, the magnitude of $T_c$ suppression was increased in the order of Si/FeN/NbN, Si/NbN/FeN, and Si/FeN/NbN/FeN structure. This result can be used to design a spin switch whose operation is based on the proximity effect between superconducting and ferromagnetic layers.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 2007.02a
• /
• pp.40-46
• /
• 2007

Established CRM system provides a powerful help for maintaining existing client, attracting new client, making profit from client or mobile communication industry. In the system structure of CRM eye, the mobile communication industry of CRM can be divided into three levels. : channel layer; operation layer, analysis layer. The data mining of CRM in mobile communication industry fall into six stages. Finally article gives some CRM's examples to illustrate how to gain client, enhance client's value, and how to maintain existing client.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 2004.05a
• /
• pp.219-224
• /
• 2004

The present study was to investigate the heat transfer enhancement effect of coil wire fins in an ice storage system. For the two cases of tubes with internal brine flows, a finned tube with coil wires on its outer surface and a smooth tube, the rates of ice layer were tested and compared for both the icing processes. The coil fins were made of a stainless steel wire with a dia. of 2.0(mm), and the coil had an outer dia. of 10(mm) and a helix angle of 60($^{\circ}$). The experimental results showed that the coil fins could substantially reduce the thermal resistance of the ice layer, and enhance the heat flow rates between the water in the storage tank and the brine. The ice storing time was found to be shortened by 13(%) for the coil fins to get the same amount of ice layer that was built on the smooth tube wall for 10 hours of operation when the same thermal conditions were provided.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.11
• /
• pp.1028-1032
• /
• 2005

Liquid crystal (LC) alignment using a photoalignment method by irradiation of polarized ultraviolet (UV) on an alignment layer has been investigated. Photoalignment method exhibits weaker anchoring energy than rubbing method so that we have studied electro-optic characteristics of fringe-field switching (FFS) mode with alignment layers using the photo and rubbing alignment methods. The cell using photo alignment layer shows lower threshold and operation voltage than those using rubbed alignment layer. Also, the former method shows higher transmittance than that of the latter.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.28B no.5
• /
• pp.404-410
• /
• 1991

In this paper,a network interface unit of token-passing bus network and its driving software are implemented based on Mini-MAP. This network interface unit performs the function of MAC layer which is responsible for transmission and reception of frames as well as the management of logical ring. The driving software performs the management of data buffer and the report of errors, if ocoured, to the higher layer. Motorola MC68824 of is used as a TBC(Token Bus Controller) and Intel80186 as a CPU for network interface unit. The operation of network interface unit is verified by self-test which checks the functioning of TBC and CPU. In addition each module of driving software is tested to check the functions regarding transmission and reception of frames.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.05a
• /
• pp.118-122
• /
• 2005

Liquid crystal (LC) alignment using a photoalignment method by irradiation of polarized ultraviolet (UV) on an alignment layer has been investigated. Photoalignment method exhibits weaker anchoring energy than rubbing method so that we have studied electro-optic characteristics of fringe-field switching (FFS) mode with alignment layers using the photo and rubbing alignment methods. The cell using photo alignment layer shows lower threshold and operation voltage than those using rubbed alignment layer. Also. the former method shows higher transmittance than that of the latter.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.9
• /
• pp.101-110
• /
• 1998

In process planning for 3D pocket machining, the critical issues for the optimal process planning are the generation of cutting layers and the tool selection for each cutting layers as well as the other factors such as the determination of machining types, tool path, etc. This paper describes the optimal tool selection on a single cutting layer for 2D pocket machining, the generation of cutting layers for 3D pocket machining, the determination of the thickness of each cutting layers, the determination of the tool combinations for each cutting layers and also the development of an algorithm for determining the machining sequence which reduces the number of tool exchanges, which are based on the backward approach. The branch and bound method is applied to select the optimal tools for each cutting layer, and an algorithmic procedure is developed to determine the machining sequence consisting of the pairs of the cutting layers and cutting tools to be used in the same operation.

• Proceedings of the Korean Information Science Society Conference
• /
• 2001.10a
• /
• pp.301-303
• /
• 2001

현재 무선단말기 보급의 확대와 시간과 공간의 제약을 뛰어넘는 장점으로 무선 인터넷 환경이 급속도로 발전하고 있다. 그러나, 본 논문의 연구 분야인 모바일 지리정보 시스템(Mobile Geographic Information System)에서 무선인터넷을 통하여 실시간 지리 정보를 얻기 위해 사용자의 무선단말기와 서버 사이에 빈번한 데이터 송수신이 이뤄져야 하며 데이터의 빠른 변화를 수용해야 한다. 그러나, 아직 현저히 낮은 대역폭을 가진 채널을 통해 통신하며, 비싼 이용 요금과 오류로 인한 자발적 또는 비자발적 연결 끊김 현상 등은 서비스 제공에 한계를 가진다. 그러므로 본 논문에서는 이동 컴퓨팅 환경의 연구를 통해 연결 끊김 현상에서도 클라이언트의 지속적인 서비스 운영을 위한 비연결 연산으로 의미론적 캐시 기법과 캐시 교체 전략에 대해 알아보며, 본 논문에서는 Layer와 Region을 고려한 의미론적 캐싱 기법을 제안하여 무선 환경에서 동적인 지도서비스를 위한 기법을 제시하였다. 이 연구를 통해 아직 많은 한계를 지닌 무선인터넷 환경에서 지리정보뿐 아니라 위치기반의 다양한 서비스 분야에 응용될 수 있으리라 기대된다.