• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.55-55
• /
• 2009

Silicon Carbide (SiC) is a material with a wide bandgap (3.26eV), a high critical electric field (~2.3MV/cm), a and a high bulk electron mobility (${\sim}900cm^2/Vs$). These electronic properties allow high breakdown voltage, high frequency, and high temperature operation compared to Silicon devices. Although various SiC DMOSFET structures have been reported so far for optimizing performances. the effect of channel dimension on the switching performance of SiC DMOSFETs has not been extensively examined. In this paper, we report the effect of the interface states ($Q_s$) on the transient characteristics of SiC DMOSFETs. The key design parameters for SiC DMOSFETs have been optimized and a physics-based two-dimensional (2-D) mixed device and circuit simulator by Silvaco Inc. has been used to understand the relationship with the switching characteristics. To investigate transient characteristic of the device, mixed-mode simulation has been performed, where the solution of the basic transport equations for the 2-D device structures is directly embedded into the solution procedure for the circuit equations. The result is a low-loss transient characteristic at low $Q_s$. Based on the simulation results, the DMOSFETs exhibit the turn-on time of 10ns at short channel and 9ns at without the interface charges. By reducing $SiO_2/SiC$ interface charge, power losses and switching time also decreases, primarily due to the lowered channel mobilities. As high density interface states can result in increased carrier trapping, or recombination centers or scattering sites. Therefore, the quality of $SiO_2/SiC$ interfaces is important for both static and transient properties of SiC MOSFET devices.

• Fire Science and Engineering
• /
• v.33 no.6
• /
• pp.165-172
• /
• 2019

This study presents the design and manufacture of a self-contained breathing apparatus SCBA wireless communication module with a multipoint simultaneous full-duplex communication system to enable communication between team members wearing the SCBA system. It is necessary for fire-fighters to wear the SCBA system during extinguishing and rescue work at the fire site. Evaluation of the team communication module confirmed the feasibility of communication over more than 500 m in the test condition based on the line of sight. By implementing the Ad-hoc function, it was confirmed that the communication distance could be extended to 128 m by automatic routing up to 3 hoc. The vertical distance inside the building for successful communication was up to the 5th floor in the open staircase and up to the 3rd floor in the partitioned staircase. Furthermore, the performance testing of the communication module assuming a fire situation, confirmed that five team members correctly recognized the standard abbreviation of fire and wireless communication without a separate PTT key operation. In addition, the flame resistance was verified by exposing the module to a flame at 950 ± 50 ℃ for 5 s and then immediately extinguishing the flame.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.48 no.6
• /
• pp.18-26
• /
• 2011

Debates concerning the competitive edge of leading 3DTV technology of the shutter glasses (SG) 3D and the film-type patterned retarder (FPR) are flaring up. Although SG technology enables Full-HD 3D vision, it requires complex systems including the sync transmitter (emitter), the sync processor chip, and the LCD lens in the active shutter glasses. In addition, the transferred sync-signal is easily affected by the external noise and a 3DTV viewer may feel flicker-effect caused by cross-talk of the left and right image. The operating current of the sync processor in the 3DTV active shutter glasses is gradually increasing to compensate the sync reconstruction error. The proposed chip is a low-power hardware sync processor based discrete-event SoC(system on a chip) designed specifically for the 3DTV active shutter glasses. This processor implements the newly designed power-saving techniques targeted for low-power operation in a noisy environment between 3DTV and the active shutter glasses. This design includes a hardware pre-processor based on a universal edge tracer and provides a perfect sync reconstruction based on a floating-point timer to advance the prior commercial 3DTV shutter glasses in terms of their power consumption. These two techniques enable an accurate sync reconstruction in the slow clock frequency of the synchronization timer and reduce the power consumption to less than about a maximum of 20% compared with other major commercial processors. This article describes the system's architecture and the details of the proposed techniques, also identifying the key concepts and functions.

• Journal of Korea Port Economic Association
• /
• v.33 no.3
• /
• pp.1-16
• /
• 2017

China has achieved rapid economic growth in the late 1970s with economic reform and open-door policy. China's economic growth began initially in the eastern coastal areas and from the 2000s expanded to the western and northeastern regions where the economy was relatively underdeveloped. In particular, in 2013 'One-Belt One Road' initiative proposed by Xi Jinping, the current General Secretary of the Communist Party of China is not only a key strategy for China's advancement into the world and also provides important opportunities for the development of these backward regions. Inland Port is the inland logistics hub and plays a crucial role in enhancing access to maritime ports as well as access to adjacent inland countries. Therefore, a number of inland ports have been developed and operated in order to enter into overseas markets and secure resources in the northeastern and western regions of China. This study aims to examine the role and development of inland port in 'One-Belt One Road' scheme. In conclusion, 'One-Belt One Road' will further increase the role of inland port, and in response, the development of inland port will play a pivotal role in one belt one road initiative. In this respect, Korean companies need to consider plans to participate in the development and operation of inland ports in China, which would provide opportunities to spread Northern markets including China, Russia, Central Asia, Eastern Europe.

• Korean Journal of Construction Engineering and Management
• /
• v.18 no.2
• /
• pp.58-70
• /
• 2017

The planning for material lifting operations is one of the key processes in high-rise building construction. Several previous studies have used rough calculations by referring to existing practices or establishing a target value for lifting cycle time or operating rate. Therefore, the purpose of this study is to propose a material lifting process optimization method for reducing the lifting cycle time and increasing the operating rate. In this study, we improve the cyclic operation network (CYCLONE) modeling method that considers the duration and zone information of each work task. This method can be used to hand over work tasks to another crew group in the work process. According to this methodology, this study optimizes the material lifting process, performs a sensitivity analysis, and evaluates the field applicability of the proposed material lifting process optimization method. Therefore, the optimized process was then applied to a high-rise building construction site. The lifting work process time and operating rate for the simulated as - is lifting process data, optimized process data, and field application result data were compared for each lifting height. From this comparison, the effectiveness of the optimization methodology was confirmed.

• Journal of the Korean GEO-environmental Society
• /
• v.17 no.10
• /
• pp.5-11
• /
• 2016

In this study, the factors affecting commercialization of $Pt/TiO_2$ catalyst, which can oxidize HCHO at room temperature, was investigated. In order to determine the optimum noble metal loading, the catalytic activity was evaluated by varying the Pt loadings; the best catalytic activity was achieved for 1 wt% of Pt. In addition, the catalyst prepared under the reduction condition showed an excellent HCHO oxidation conversion at room temperature. Based on these results, it was confirmed that the activity could be changed by oxidation state of active metal, and in case of Pt, metallic Pt ($Pt^0$) species was more active on HCHO oxidation at room temperature. As a result of evaluating an effect of space velocity to determine the optimum operating condition, it was found that in the lower space velocity, conversion rate of HCHO was increased due to increase of catalyst bed. Catalytic activity was greater in the presence of moisture than in its absence. Through above results, the key factors for commercialization of oxidation catalyst, which was operated at room temperature even without any additional energy source was confirmed.

• Journal of the Korean Geographical Society
• /
• v.32 no.4
• /
• pp.491-510
• /
• 1997

The main purpose of this study is to analyse and explain the occupational pattems of Korean immigrants in Auckland, New Zealand, in order to understand how they are adapting to New Zealand society. We analysed the Korean telephone directory from 1992 to 1996 and listings of Korean businesses in the biweekly magazine 'Korea Town'. The bulk of Korean immigration started in 1991 when the New Zealand govemment opened up its immigration doors to non-Europeans. Clearly, recent Korean immigration has experienced exponential growth. The range of Korean's occupations has grown gradually compared to the growth of Korean immigration, from about 20 different kinds of occupations in 1992 to 55 in 1997. In 1992, there were only 37 korean businesses listed, but in 1997, there are about 636-a growth of over 1,600${\%}$. As we analysed all Korean businesses, we found that almost all Korean businesses and occupations have not penetrated the host society economy but reflect typical characteristics of ethnic businesses, in tems of capital, business operation, employees and customers being mainly Korean, Korean businesses are concentrated in the City Centre and North Shore. The concentration in North Shore reflects the concentration of Korean residents in this area, while Korean businesses in the City centre are mostly tourist industries(travel agencies, souvenir shops)and restaurants. The findings of this study closely reflect similar Westem studies on ethnic minority businesses. From this, we can conclude that Korean businesses at the moment reflect the initial stage of Korean communities in New Zealand.

• Journal of Periodontal and Implant Science
• /
• v.47 no.5
• /
• pp.312-327
• /
• 2017

Purpose: This study assessed marginal bone remodeling and soft tissue esthetics after the loading of single bone-level implants in the anterior maxilla. Methods: An open, single-arm observational clinical trial with 3 years of follow-up was performed, including 22 implants. The patients presented with a single tooth gap in the anterior maxilla (tooth positions 14-24), with natural or restored adjacent teeth. An implant was placed at least 8 weeks post-extraction and healed submerged for 6 weeks. After the second-stage operation, a fixed provisional prosthesis was provided. The final restoration was placed 6 months after the provisional restoration. The time of the provisional crown connection was considered to be the baseline in this study. Esthetic parameters and the marginal bone level were assessed at 6, 12, 24, and 36 months. Results: All implants were well integrated in the bone. A statistically significant increase was found in the mean implant stability quotient between the time of the provisional prosthesis and the time of the final prosthesis. Most implants (95.5%) revealed marginal bone resorption (<0.5 mm), and just 1 implant (4.5%) showed a change of 2.12 mm from baseline to 36 months (mean $0.07{\pm}0.48mm$), while the crestal bone level decreased significantly, from $2.34{\pm}0.93mm$ at baseline to $1.70{\pm}1.10mm$ at 36 months. The facial gingival margin and papilla were stable and the esthetic scores indicated high patient and dentist satisfaction. Conclusions: Platform-switching bone-level implants placed in maxillary single-tooth gaps resulted in successful osseointegration with minimal marginal bone resorption. The peri-implant soft tissue was also esthetically satisfying and stable.

• The Korean Journal of Nuclear Medicine
• /
• v.25 no.2
• /
• pp.266-279
• /
• 1991

1989년 9월부터 1990년 8월까지 국제 원자력기구의 지역 계획에 의해 국내 26개 (후반부 31개)의 기관이 참가하여 T3, T4, TSH를 측정하여 결과를 모으고, 외부정도관적를 시행한 결과가 다음과 같다. 1) 외부정도관리를 위한 컴퓨터 소프트웨어를 작성하였다. 데이타의 입력, 정도 분석, 월별 보고, 분기별 보고 및 수행 분석 프로그램을 만들되 전체 검사실결과에서 추린 평균값(all laboratories trimmed mean: ALTM)으로 모집단평균을 삼아 편차, 편이, 편이평균 그리고 이들의 경시적 변화를 분석하도록 하였다. 2) 전후반 2회에 나누어 만든 및치 사이의 편차는 유의하지 않았다. T3값의 변이계수는 7.2%이하(정상 T3 값) 또는 9.2%와 13.4%사이 (높은 T3 값), 74 값의 변이계수는 4.6%이하(정상 또는 높은 T4값), 5.4%와 9.5%사이(낮은 T4값)이었다. TSH는 정상범위 값에서 21.7%이하의 변이 계수를 보였고 정상보다 낮거나 높은 TSH의 풀은 8 7%와 21.2%사이의 변이제수를 보였다. 3) 전체 검사실 추린 평균값(ALTM)에 따른 변이계수의 변동은, ALTM이 정상 T4값범위일 때 변이계수는 15%이하이었고, 낮은 T4값일 때는 중간값이 15%이고 분포범위는 50%까지이었다. T3값의 변이계수는 대체로 20%이하이었다. TSH의 변이계수는 1mU/L를 전후로 급격히 상승하여 200%에 달하였다. 4) 3표준편차보다 높거나 낮은 값을 보인 검사실들의 분포는 전체 검사실결과에서 추린 평균값(ALTM)과 상관없었다. 5) 첨가한 T3, T4, TSH에 대한 회수율은 T4는 104, 106%, T3는 67%, 74%, TSH는 87%, 86%이었다. 이상과 같이, 저자들이 만든 소프트웨어 프로그램으로 외부정도관리를 위하여 쉽게 데이터를 분석하고 보고서를 작성하여 갑상선호르몬의 경사신뢰도를 평가할 수 있게 되었으며, 위에 요약한 첫 해의 외부정도관리 결과를 바탕으로 참가기관의 동의하에, 앞으로 정도관리 항목의 확대와 외부정도관리의 지속적인 시행이 바람직하다고 생각하였다.

• Journal of Korea Multimedia Society
• /
• v.8 no.3
• /
• pp.297-312
• /
• 2005

Aggregation is an operation that plays a key role in multidimensional OLAP (MOLAP) systems of data warehouse. Existing aggregation operations in MOLAP have been proposed for file structures such as multidimensional arrays. These tile structures do not work well with skewed distributions. This paper presents a physical design methodology for storage structures ni MOLAP that use the multidimensional tile organizations adapting to a skewed distribution. In uniform data distribution, we first show that the performance of multidimensional analytical processing is highly affected by the similarity of the shapes between query regions and page regions in the domain space of the multidimensional file organizations. And than, in skewed distributions, we reflect the effect of data distributions on the design by using the shapes of the normalized query regions that are weighted with data density of those query regions. Finally, we demonstrate that the physical design methodology theoretically derived is indeed correct in real environments. In the two-dimensional file organizations, the results of experiments indicate that the performance of the proposed method is enhanced by more than seven times over the conventional method. We expect that the performance will be more enhanced when the dimensionality is more than two. The result confirms that the proposed physical design methodology is useful in a practical way.