• The KSFM Journal of Fluid Machinery
• /
• v.15 no.6
• /
• pp.18-24
• /
• 2012

This study simulated the operation of a steam injected gas turbine combined heat and power (CHP) system. A full off-design analysis was carried out to examine the change in the turbine blade temperature caused by steam injection. The prediction of turbine blade temperature was performed for the operating modes suggested in the previous study where the limitation of compressor surge margin reduction was analyzed in the steam injected gas turbine. It was found that both the fully injected and partially injected operations suggested in the previous study would cause the blade temperature to exceed that of the pure CHP operation and the under-firing operation would provide too low blade temperature. An optimal operation was proposed where both the turbine inlet temperature and the injection amount were modulated to keep both the reference turbine blade temperature and the minimum compressor surge margin. The modulation was intended to maintain a stable compressor operation and turbine life. It was shown that the optimal operation would provide a larger power output than the under-firing operation and a higher efficiency than the original partially injected operation.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2012.11a
• /
• pp.125-126
• /
• 2012

Domestic architect office from a period of high growth from the 1970s to the '80s has been established as some of the large corporations or publicly traded corporation. 1997 IMF has pointed out there is a lot of need for improvement activities in accordance with the construction recession since the 2008 global financial crisis. In order to address these causes, the company's continuous efficient operation for accurate efficiency and competitiveness analysis was required. Leverage financial ratio indicators Study Using Data Envelopment Analysis Data Envelopment Analysis (DEA) model, how to find a benchmark for the improvement of the efficiency of inefficient enterprises in various sectors being. In this study, a comparison of the conventional DEA model and the DEA-AR model is used to analyze the efficiency and domestic architect office is to improve the management efficiency.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.10
• /
• pp.1540-1546
• /
• 2017

In piezoelectric device applications, it is important to improve a system efficiency because of the low generated power. In this paper, an optimal driving method is proposed to improve a system efficiency for a piezoelectric energy harvesting system. The proposed method considers disappear energy in input capacitors and the converter efficiency according to the input voltage magnitude to minimize energy losses. Experimental results based on various energy generation cases verify that the proposed method significantly improves the system efficiency; the efficiency is approximately 9.97% higher than that of the conventional method.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.33 no.1
• /
• pp.10-16
• /
• 2010

Mail centers are essential postal facilities that sort and dispatch postal items, and should be operated efficiently to provide customers high quality postal services. So the efficiency analysis of mail centers should be performed in order to induce better operation. But current performance evaluation system has 95 percent of predetermined and weighted non-quantitative indices. There is need to introduce objective efficiency measurement methodology. The main objectives of this study was to analyze the efficiency of 24 mail centers empirically using cone-ratio DEA and suggest the appropriate cone-ratio method. Consequently, this paper suggests that the cone-ratio DEA model integrating decision-maker's preferences is more desirable for efficiency analysis than that of using transformed data.

• Journal of Navigation and Port Research
• /
• v.41 no.5
• /
• pp.319-328
• /
• 2017

The efficiency of port operations is an important indicator of port development. Moreover, there is excess handling capacity in Chinese ports, which results in a slower speed of development. Under the detrimental environment of the international shipping market, it is necessary to improve the operation efficiency of ports for long-term development. This paper provides an assessment of the competitiveness of Chinese seaport companies using the Boston Consulting Group's matrix, and efficiency measurements using a data envelopment analysis and the Malmquist method. This analysis showed that highly efficient companies reformed their development strategies, which should be a solution considered by less efficient companies, such as Shenzhen Yan Tian Port Holdings Co., Ltd.. Although, having high throughput should be reformed in the investment structure. This research will assist port companies in gaining effective operating experience, and governments in establishing strategic planning to enhance the efficiency of port development.

• Health Policy and Management
• /
• v.11 no.2
• /
• pp.58-84
• /
• 2001

This study was conducted to explore the relationship between the efficiency and its organizational determinants of tile Community Mental Health Centers(CMHCs). Data are obtained from 81 personnel of 27 CMHCs from Sept. to Oct. in 1999(19 in Kyunggi province, 7 in Seoul City and 1 in Chunchon, Kangwon province). Major findings of this study are as follows. 1. DEA is a mathematical programming technique that optimizes the relative efficiency ratio of inputs over outputs for each decision-making unit(DMU). It produces a summary scalar efficiency ratio for each DMU of CMHCs. It assessed multiple inputs and multiple outputs simultaneously, and compared to specific peer group of CMHCs. 2. Organizational determinants of DEA efficiency of CMHCs we proved as advertisement(＋), location of CMHCs(in public facility)(＋), area of facility(＋), period of operation(＋), job satisfaction(＋), clarity of work-role(vague), cohesion(－), rate of certified personnel(＋), number of referral(＋), and voluntary service time(－).

• Membrane and Water Treatment
• /
• v.8 no.2
• /
• pp.201-210
• /
• 2017

We investigated the effect of applied voltage and electrolyte concentration on the nitrate removal and its energy/current efficiency during the electrodialysis. The current increased as the applied voltage increased up to 30 V showing the limiting current density around 20 V. The nitrate removal efficiency (31 to 71% in 240 min) and energy consumption (11 to $77W{\cdot}h/L$) gradually increased as the applied voltage increased from 10 to 30 V. The highest current efficiency was obtained at 20 V. The increase in electrolyte concentration from 100 to 500 mM led to the dramatic increase of nitrate removal efficiency with much faster removal kinetics (100 % in 10 min).

• Journal of Korean Society on Water Environment
• /
• v.31 no.5
• /
• pp.523-532
• /
• 2015

Hydrocyclone is widely used in industry, for its simple design, high capacity, low maintenance and low operational cost. The objective of this study is to develop hydrocyclone coagulation and filtration system. The system is made of hydrocyclone ballasted coagulation with polyaluminium chloride silicate (PACS) and upflow filter to treat micro particles in urban storm runoff. Roadside sediment particles (< $200{\mu}m$) was mixed with tap water to make various turbid suspensions to simulate urban storm runoff. The filter cartridge was filled with polyethylene media system and ran 1hr per everyday and total operation time were 8.19hrs and backwashing everyday after end of operation. The operation condition of flowrate was $8.2{\sim}11.9m^3/day$ (mean $10.1m^3/day$) and surface overflow rate (SOR) based on filter surface area was $45.5{\sim}65.9m^3/m^2/day$ (mean $55.7m^3/m^2/day$). The range of PACS dosage concentration was 14.0~31.5 mg/L. As the results of operation, the range of removal efficiency of turbidity, SS were 81.0~95.8% (mean 89.5%) 81.8~99.0% (mean 91.4%), respectively. An increase of filtration basin retention time brought on increased of removal efficiency of turbidity and SS, and increase of SOR brought on decreased of removal efficiency. During the first flush in urban area, storm runoff have an high concentration of SS (200~600 mg/L) and the filtration bed becomes clogged and decreased of removal efficiency. Backwashing begins when the drainage pipe valve at the filtration tank bottom is completely open (backwashing stage 1). Backwashing stage 2 was using air bubbles and water jet washing the media for 5 mins and open the drainage valve. After backwashing stage 1, 2, 61.83~64.04%, 18.53~27.51% of SS loading was discharged from filtration tank, respectively. Discharged SS loading from effluent was 7.12~14.79% and the range of residual SS loading in fliter was 2.26~5.00%. The backwashing effects for turbidity, SS were 89.5%, 91.4%, respectively. The hydrocyclone coagulation and filtration with backwashing system, which came out to solve the problems of the costly exchange filter media, and low efficiency of removing micro particles of filter type nonpoint treatment devices, is considered as an alternative system.

• Industry Promotion Research
• /
• v.7 no.2
• /
• pp.1-13
• /
• 2022

This study of purpose is to examine the efficiency through the current status and performance of each institution providing the Daegu community service investment project, and to find a direction for the efficient operation of each institution. In order to promote efficient and effective project promotion by checking the management status that meets the purpose of the local community service investment project, to provide systematic services necessary to consumers, improve quality, and improve the environment, the accurate situation and situation through the efficiency analysis of the service provider organization It is necessary to identify problems, develop programs suitable for regional characteristics, and actively manage services. Specifically, it seeks to provide a more stable and sustainable local community service by measuring efficiency based on information from each institution and comparing and analyzing it among local governments. For this purpose, it is meaningful in analyzing the efficiency of each institution by using the DEA (data envelope analysis) method and presenting the goals and policy implications for efficient operation by comparing them by local government.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.5
• /
• pp.596-603
• /
• 2013

The increase of distributed power generation is closely related to interest in microgird including renuable energy sources such as photovoltaic (PV) systems and fuel cell. By the growing interest of microgrid all over the world, many studies on microgrid operation are being carried out. Especially operation technique which is core technology of microgrid is to supply heat and electricity energy simultaneously. Optimal microgrid scheduling can be established by considering CHP (Combined Heat and Power) generation because it produce both heat and electricity energy and its total efficiency is high. For this reason, CHP generation in microgrid is being spotlighted. In the near future, wide application of microgrid is also anticipated. This paper proposes a mathematical model for optimal operation of microgrid considering both heat and power. To validate the proposed model, the case study is performed and its results are analyzed.