• Transactions of Materials Processing
• /
• v.7 no.6
• /
• pp.562-569
• /
• 1998

The limit drawing ratio (LDR) is a major process parameter in the process design of deep drawing. If the actual drawing ratio is greater than the LDR for a particular stage then an intermediate stage has to b added the process sequence to avoid failure during the drawing operation and the optimal process design considering for the first-drawing and redrawing by using finite element method combined with ductile fracture criterion. From the results of finrte element analysis the optimal value of drawing ratio is obtained which contributes to the more uniform distribution of thickess and the smaller values of the ductile fracture infinal cup.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.20 no.3
• /
• pp.428-433
• /
• 2010

The notion "block rotation" denotes the operation of exchanging two consecutive sequences of elements uv to vu. There are three already well-known block rotation algorithms called BlockRotation, Juggling and Reversal algorithm. Recently we presented a novel block rotation algorithm called QuickRotation. In this paper we compare QuickRotation to these three known block rotation algorithms. This comparison covers a complexity analysis as well as benchmarking and shows that a switch to QuickRotation is almost always advantageous.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.19 no.39
• /
• pp.255-264
• /
• 1996

This Paper presents a heuristic algorithm for machine-part group formation considering part production information (Production volume, roution sequence, unit operation time, facility size) in cellular manufacturing logistics system. In general, factory space is restricted within limited size when cells are located. A twofold heuristic algorithm is developed for considering factory space restrictions of located cells. The first phase is a aggregation procedure to minimize inter cell movement for satisfactoring space restriction. The second phase is a rearrangement procedure to maximize line balancing efficiency between machines within the cell and non assigned machine during first phase. Numerical example is presented to verify the efficiency of proposed algorithm.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2012.11a
• /
• pp.48-50
• /
• 2012

기존의 저궤도 위성에서는 RTCS 이용하여 순차적인 명령 집합을 구현해왔다. 장치의 초기화, 관련 모드의 변경, 임무 수행 등 많은 부분에서 연관된 순차 명령이 실행되도록 설계되어 적용되었다. RTCS 는 연관된 순차 명령을 정해진 시간 간격을 두고 실행 할 수 있도록 해주었다. 이러한 RTCS 의 수행 중, 위성의 상태에 따른 조건 판단이나 분기가 필요한 경우, 위성비행소프트웨어에 별도의 Logic 을 구현하였다. 이 방법은 RTCS 자체의 구조가 단순하고, 그 수행이 직관적이라는 장점이 있으나, RTCS 와 관련된 Logic 이 위성비행소프트웨어에 고정적으로 구현되고, 조건 판단 및 분기가 여러 부분에서 수행될 경우 RTCS 가 단편화되며, 위성비행소프트웨어에서 구현해야 하는 Logic 의 관계가 복잡해지는 단점이 있다. 본 논문에서는 기존 RTCS 가 가지는 단순한 구조를 유지하면서, 조건 판단 및 분기의 처리가 가능한 새로운 순차 명령 집합의 설계에 대해 소개한다.

• Journal of the Korean Mathematical Society
• /
• v.56 no.4
• /
• pp.947-984
• /
• 2019

We provide two shifted analogues of the tableau switching process due to Benkart, Sottile, and Stroomer; the shifted tableau switching process and the modified shifted tableau switching process. They are performed by applying a sequence of elementary transformations called switches and shares many nice properties with the tableau switching process. For instance, the maps induced from these algorithms are involutive and behave very nicely with respect to the lattice property. We also introduce shifted generalized evacuation which exactly agrees with the shifted J-operation due to Worley when applied to shifted Young tableaux of normal shape. Finally, as an application, we give combinatorial interpretations of Schur P- and Schur Q-function related identities.

• Journal of the Semiconductor & Display Technology
• /
• v.17 no.1
• /
• pp.50-53
• /
• 2018

Cyclic measurement system using relay circuit for organic light emitting diode (OLED) was demonstrated. The OLED characterization such as current-voltage, impedance, and capacitance-voltage is performed in sequence, repetitively and automatically under full control of the personnel computer (PC) without changing the connection of cables. Owing to in situ degradation by cyclic measurement, the time dependence of the data can give good information on the reliability factor of the OLED devices. Therefore, both performance and reliability of the OLEDs can be evaluated, with no manual operation during the entire process.

• Journal of Industrial Convergence
• /
• v.3 no.1
• /
• pp.19-31
• /
• 2005

This paper deals with the sequencing problem in the operation of the manufacturing systems with the constraint of buffer capacity. Some of studies for this theme have been progressed for several years. And then most of them considered only one objective, such as maximum lateness, machine utilization, makespan, mean flowtime and so on. This study deal with two objectives of the delivery for customers and the idle time of machines for producers. For the decision of sequence, the utility function is used. The developed heuristic algorithm presents a good solution. Through a numerical example, the procedures of the job sequencing is explained.

• Journal of Navigation and Port Research
• /
• v.43 no.5
• /
• pp.273-280
• /
• 2019

This study developed an optimization model, defined as the IPS (Itinerary for Passenger Satisfaction), for a cruise ship to identify an itinerary that maximizes passenger satisfaction. A 0-1 integer programming model was developed to provide an optimal sequence of ports of call, assigning a destination to each day of the cruise. The concepts of the destination access network and the neighborhood of a destination were designed and manipulated to organize the complex network of destinations so that each next destination is selected within a practical overnight sail. The developed model can also be viewed as a reduced variant of the traveling salesperson problem with less constraints. A set of example tests shows that practical scenarios of the IPS with moderate cruise duration can be easily solved with light computation loads. Considering cruise ship passengers usually make their decisions not relying on only one destination but on an itinerary in its entirety, the purpose of this study was to identify itinerary alternatives to attract potential cruise passengers for attaining maximum occupancy level.

• Journal of Korea Multimedia Society
• /
• v.24 no.6
• /
• pp.796-804
• /
• 2021

In computer vision, visual tracking method addresses the problem of localizing an specific object in video sequence according to the bounding box. In this paper, we propose a tracking method by introducing the feature correlation comparison into the siamese network to increase its matching identification. We propose a way to compute location of object to improve matching performance by a correlation operation, which locates parts for solving the searching problem. The higher layer in the network can extract a lot of object information. The lower layer has many location information. To reduce error rate of the object center point, we built a siamese network that extracts the distribution and location information of target objects. As a result of the experiment, the average center error rate was less than 25%.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2004.05a
• /
• pp.96-100
• /
• 2004

In the ship building industry various problems of erection is counterfeited due to formation of bottle necks in the block erection flow pattern This kind of problems cause accumulated problems in real-time erection right on the floor, When such a problem is approached, a support data of the entire erection sequence should be available, Here planning is done by reasoning about the future events in order to verify the existence of a reasonable series of actions to accomplish a goal. This technique helps in achieving benefits like handling search complications, in resolving goal conflicts and anticipation of bottleneck formation well in advance to take necessary countermeasures and boosts the decision support system, The data is being evaluated and an anticipatory function is to be developed This function is quite relevant in day to day planning operation. The system updates database with rearrangement of off-critical blocks in the erection sequence diagram, As a result of such a system, planners can foresee months ahead and can effectively make decisions regarding the control of loads on the man, machine and work flow pattern, culminating to an efficient load management. Such a foreseeing concept helps us in eliminating backtracking related adjustment which is less efficient compared to the look-ahead concept. An attempt is made to develop a computer program to update the database of block arrangement pattern based on heuristic formulation.