• KIPS Transactions on Software and Data Engineering
• /
• v.9 no.2
• /
• pp.39-44
• /
• 2020

In this paper, we show a modified Diffie-Hellman key exchange protocol that can exchange keys by exposing only minimal information using pre-computable session key pairs. The discrete logarithm problem, which provides the safety of existing Diffie-Hellman and Diffie-Hellman based techniques, is modified to prevent exposure of primitive root. We prove the algorithm's operation by applying the actual value to the proposed scheme and compare the execution time and safety with the existing algorithm, shown that the security of the algorithm is improved more than the product of the time complexity of the two base algorithms while maintaining the computation amount at the time of key exchange. Based on the proposed algorithm, it is expected to provide a key exchange environment with improved security.

• Journal of Powder Materials
• /
• v.12 no.3
• /
• pp.167-173
• /
• 2005

Production of weakly agglomerated nanopowders with the characteristic size of about 10 nm and a narrow particle size distribution is still a topical problem especially if the matter is an acceptable output (>50 g/hour), a high purity of the final product, and a low (energy consumption. The available experience and literature data show that the most promising approach to production of such powders is the evaporation-condensation method, which has a set of means for heating of the target. From this viewpoint the use of pulsed electron accelerators for production of nanopowders is preferable since they allow a relatively simple adjustment of the energy, the pulse length, and the pulse repetition rate. The use of a pulsed electron accelerator provides the following opportunities: a high-purity product; only the target and the working gas will interact and their purity can be controlled; evaporation products will be removed from the irradiation zone between pulses; as a result, the electron energy will be used more efficiently; adjustment of the particle size distribution and the characteristic size of particles by changing the pulse energy and the irradiated area. Considering the obtained results, we developed a design and made an installation for production of nanopowders, which is based on a hollow-cathode pulsed gas-filled diode. The use of a hollow-cathode gas-filled diode allows producing and utilizing an electron beam in a single chamber. The emission modulation in the hollow cathode will allow forming an electron beam 5 to 100 ms long. This will ensure an exact selection of the beam energy. By now we have completed the design work, manufactured units, equipped the installation, and began putting the installation into operation. A small amount of nanopowders has been produced.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.4 no.3 s.14
• /
• pp.51-60
• /
• 2004

Urban flood damage has been caused by drainage deficiency. One of the methods to solve this problem is to construct detention basin and Pumping station and to pump out the water to the river. However, because of rapid urbanization, the capacity of drainage pipelines is sometimes not sufficient enough during the rainy season. Therefore, even though we have enough pumping stations, the inflow of surface water never reaches to the detention area, causing floods in urban area. This research is to find improvement of urban drainage system, estimating drainage pipeline risk. Also, eight models for a computer program were developed for practical use. The models were verified changing precipitation duration, intensity, design period, time distribution model, and etc. This verification was processed focusing that the model can regulate the water level in the detention basin and minimize the effect downstream. As a result Fuzzy models were found to be efficient to lower the water level in detention basin, and decreased about 8 cm in water level of downstream.

• Journal of Biosystems Engineering
• /
• v.30 no.4 s.111
• /
• pp.210-219
• /
• 2005

This study was conducted to solve the problem of crawled spinach harvesting that had been mainly done by manpower on the outdoor fields during the winter season. Moreover, there are not enough workers available for farming at most of rural areas in Korea because farming is getting hard and the number of old-aged workers is increasing. In order to find appropriate methods of digging, picking and collecting of spinach, the tests were examined outdoors. A prototype was designed based on the results of the tests and then fabricated for digging, picking-up and then collecting in continuous operation for harvesting spinach planted in the outdoor fields. In the field test with the prototype, the vibration intensity transmitted to the driver by vibrating blade was low while the vibrating blade reduced digging power by $46\%$ compared to that of the fixed blade. The spinach loss was found to be as low as $0.7\%$ in the condition of digging depth of 40 mm, cam rotational velocity of 748 rpm, and blade amplitude of 16.5 m. The working performance of the prototype spinach harvester was found to be 3.8 hour/10a resulting in $96\%$ of labor saving and $85\%$ of operating cost compared to the conventional manual harvesting.

• Journal of Broadcast Engineering
• /
• v.1 no.1
• /
• pp.7-13
• /
• 1996

MASF is a kind of temporal filter proposed for noise reduction and temporal band limitation. MASF uses motion vectors to extract temporal information in spatial domain. Therefore, inaccurate motion information causes some distortions in MASF operation. Currently, bilinear interpolation after BMA(Block Matching Algorithm) is used for the motion estimation sheme of MASF. But, this method results in unreliable estimation when the object in image sequence has larger movement than the maximum displacement assumed in BMA or the input images are severely corrupted with noise. In order to i:;olve this problem, we analyse the effect of inaccurate motion on MASF and propose a hierarchical motion estimation algorithm based on the analysis results. Experimental results show that the proposed method produces reliable output under large motion and noisy situations.

• Journal of Korean Society for Atmospheric Environment
• /
• v.27 no.6
• /
• pp.703-710
• /
• 2011

Odor emission from domestic sewer systems has become a serious environmental problem. An investigation on a sewer manhole revealed that anaerobic decay of sediment organic matters (SOMs) and related declines of oxidation reduction potential (ORP) in the sediment layer were the main reason of the production of volatile sulfur compounds. In addition, as the anaerobic decaying period continued, the odor intensity rapidly increased with increasing concentrations of $H_2S$ and dimethyl sulfide. As a feasible method to control SOMs and to minimize odor emission potentials, an electrolytic oxidation process has been employed to the sediment sludge phase. In this study, voltages applied to the electrolytic oxidation process were varied as a main system parameter, and its effects on odor removal efficiencies and reaction characteristics were investigated. At the applied voltages greater than 20 V, the system efficiently oxidized the organic matter, and the ORP in the sludge phase increased rapidly. As a consequence, the removal efficiency of hydrogen sulfide was found to be >99% within 60 minutes of the electrolytic oxidation. Overall, the electrolytic oxidation process can be an alternative to control odor emission from sewer systems, and a threshold input energy needs to be determined to achieve effective operation of the process.

• Journal of Korean Foot and Ankle Society
• /
• v.10 no.2
• /
• pp.230-233
• /
• 2006

Purpose: The distal chevron osteotomy has gained popularity for the mild to moderate hallux valgus, but necessity of fixation is controversy. No fixation of distal chevron osteotomy cause instability, but fixation has problem which has pin site infection and irritability, extension of operation time, discomfort of rehabilitation. So, the author was going to analyse and compare with and without in the fixation of distal chevron osteotomy. Materials and Methods: Between 2004 and 2005, a total 18 patients (20 feet) following with and without in fixation of distal chevron osteotomies. The fixation group (A) was performed for the treatment of 10 patients (10 feet) and no fixation group (B) was done to 8 patients (10 feet). Results: On group A, the mean first MTP (metatarsophalangeal) angle corrected $17^{\circ}$ pre-operatively to average $29^{\circ}$ (range; $20-37^{\circ}$) and the mean first IM (intermetatarsal) angle corrected $10^{\circ}$ pre-operatively to average $15^{\circ}$ (range; $9-18^{\circ}$). On Group B, the mean first MTP angle corrected $16^{\circ}$ pre-operatively to average $29^{\circ}$ (range; $18-33^{\circ}$) and the mean first IM angle corrected $7^{\circ}$ pre-operatively to average $13^{\circ}$ (range; $9-16^{\circ}$) (P>0.05). Clinical results, based on AOFAS score showed an improvement in the overall results. Conclusions: Comparing the clinical and radiographic results of the distal chevron osteotomies no difference in with and without fixation of distal chevron osteotomies.

• Journal of Korean Foot and Ankle Society
• /
• v.13 no.1
• /
• pp.55-59
• /
• 2009

Purpose: We tried to evaluate the usefulness of the arthroscopy in the operative treatment of intra-articular calcaneal fracture. Materials and Methods: Between March 2005 and May 2008, 9 patients with intra-articular calcaneal fractures（Tongue type or Sanders type IIC) were treated with arthroscopically assisted percutaneous reduction and screw fixation. American orthopedic foot and ankle society (AOFAS) ankle-hindfoot score, visual analogue scale (VAS), preoperative and postoperative Bohler's angle and the rate of complication were evaluated. Results: AOFAS score at postoperative 1 year was 88.2 (range, 71-92), and mean VAS score was 2.8 (range, 1-4). Bohler angle was improved from preoperative mean $16.2^{\circ}$ to postoperative mean $29.7^{\circ}$. There were no complications such as wound problem, infection or nerve injury. Conclusion: Subtalar arthroscopy provides precise view of posterior facet during the operation. Therefore, it can be a useful tool in treating intra-articular calcaneus fractures, especially tongue type and Sanders type IIC fractures.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.9A
• /
• pp.1013-1021
• /
• 2004

In the WCDMA mobile multimedia communication system, the adaptive array antenna IS adopted to improve the performance of the system by reducing inter-user interference using antenna beam control. Usually, the interference resulted from the higher data rate users is much more significant to the lower data rate users than the other way around, so the overall performance can be enhanced by reducing the interference from higher data rate users. In order to maximize the efficiency of adaptive antenna operation, an optimal call admission control, especially during handoff, adaptive to the data rates is a critical problem. In this paper, We propose a call admission control algorithm based on the Soft QoS concept for the efficient processing of the handoff of higher data rate calls, and an adaptive handoff control mechanism according to the data rates. The proposed algorithm has been evaluated by computer simulation that it accommodates high data rate users among many lower data rate users much better, and the average call blocking probability for lower rate users becomes much lower than the conventional call admission control algorithm.

• Archives of Plastic Surgery
• /
• v.33 no.1
• /
• pp.95-100
• /
• 2006

The challenge of accurately predicting eyelid height after blepharoptosis surgery is well-known problem even in complete hands. From May, 1988 to December, 2004, authors reviewed 182 cases(240 eyes) of blepharoptosis corrected by frontalis muscle transfer or levator resection and had experienced 10 cases(15 eyelids) of early reoperation around 1 week. The period from initial operation to reoperation are between six to eight days and mean period is seven days. Initial operative procedures were frontalis muscle transfer in 3 cases(4 eyelids) and levator resection in 7 cases(11 eyelids). Follow up period ranged from 6 months to 16 years. Early adjusting surgery was performed in accordance with the preoperative and postoperative degree of ptosis of patient and considering previous operative technique. The results are evaluated according to the criteria of an ideal correction by Souther and Jordan. Seven patients have good or satisfactory results(less than 1 mm asymmetry, good in 5 cases and satisfactory in 2 cases). Three patients(5 eyelids) recorded as poor results(more than 2 mm asymmetry). Even if early or late reoperation can be effective in correcting unsatisfactory results after correction of blepharoptosis, early reoperation is better than later reoperation because early reoperation can offer a reduction in time to final result, the ease with which it is performed, potential cost savings. The experience of surgeon is also important factor for the reatment of recurred blepharoptosis