• Journal of the Institute of Convergence Signal Processing
• /
• v.10 no.4
• /
• pp.280-288
• /
• 2009

In this paper, we developed new time information recording module of VSI (VLBI Standard Interface) format by analyzing the Mark5B recorder control and operation software with 1Gbps speed, which is able to record the weak signal of space radio source, through the Korean VLBI Network (KVN). The control and operation software of high-speed recorder consists of 2 kinds of software, which is that it can operate RAID control board by controlling large capacity HDD drive and the network control and operation. Especially, core software in high-speed recorder is able to output the results after performing and analyzing the input command. Through the analysis of control and operation software, new time information recording module, which is needed to process the observed data for correlation, is developed. New developed time information recording module can record the time information together after checking the interrupt of 1PPS(Pulse Per Second) input signal when the observed data will be recorded. To verify the normal operation of the developed time information recording module, we performed the real observation test and confirmed the effectiveness of developed software through analyzing the recorded observation data.

• Proceedings of the Korean Nuclear Society Conference
• /
• 2005.10a
• /
• pp.494-495
• /
• 2005

• Journal of Electrical Engineering and Technology
• /
• v.4 no.3
• /
• pp.377-381
• /
• 2009

In the development of an interior permanent magnet synchronous machine (IPMSM) for high-speed operation, the problem of mechanical stress of the rotor by centrifugal force becomes more essential as the speed and size of the machines increase. In this paper, the optimal design process combined with mechanical stress analysis was presented. In the analysis of mechanical stress, the node and element data obtained by the electromagnetic field analysis program are also used in the stress analysis. Therefore, the different pre-processing for the stress analysis program is no longer required. Therefore, the computing time of the new method is very short compared with the conventional approach, and when repeated analyzes of various models are required, this method is very useful. The validity of our methods was verified by comparing simulation results with conventional and experimental data.

• Journal of Korean Society of Forest Science
• /
• v.102 no.2
• /
• pp.229-238
• /
• 2013

This study was conducted to analyze on the operational cost of logging operations in the whole-tree logging operation system by tower-yarder and swing-yarder, and in the cut-to-length logging operation system by excavator with grapple in order to spread efficient logging operation technique and to establish the logging operation system. In the results of the analysis of operation cost, in case of the whole-tree logging operation system, the operation cost was 2,099 won/$m^3$ in felling by chain saw, 28,286 won/$m^3$ in yarding by tower-yarder, 18,265 won/$m^3$ in yarding by swing-yarder, 18,939 won/$m^3$ in bucking by excavator with grapple and chain saw, 20,484 won/$m^3$ in forwarding and accumulation by wheel type mini-forwarder, 12,701 won/$m^3$ in forwarding and accumulation by excavator with grapple and small forwarding vehicle. In case of the cut-to-length logging operation system, the operation cost was 10,160 won/$m^3$ in felling and bucking by chain saw, 7,567 won/$m^3$ in cut-to-length extraction by excavator with grapple, 6,982 won/$m^3$ in branches and leaves extraction by excavator with grapple, 3,040 won/$m^3$ in the operation road construction by excavator with grapple, 20,484 won/$m^3$ in forwarding and accumulation by wheel type mini-forwarder, 12,701 won/$m^3$ in forwarding and accumulation by excavator with grapple and small forwarding vehicle.

• Journal of Navigation and Port Research
• /
• v.41 no.1
• /
• pp.17-24
• /
• 2017

This study uses Conjoint Analysis to study optimal port operations at the newly built International P assenger Terminal (IPT) at Inchon Port, Korea. The perceptions of users, operators, and the Incheon Port Authority are compared and analyzed. The results of user Conjoint Analysis showed that rent calculation method was the most important factor in the NIPT operation plan, followed by establishing automation and the size of the site area. For the Incheon Port Authority and operators, the rent calculation method turned out to be the most important factor for NIPT operation plans. It was followed by establishing automation and the site area. Utility results showed the "investment cost preservation method" to have the highest rent calculation utility, "yard automation" as the priority, and "43,000 pyeong-48,000 pyeong" as the optimal site area.

• Proceedings of the KIEE Conference
• /
• 2002.07b
• /
• pp.1040-1042
• /
• 2002

In general, satellite electrical power system plays an important role in its mission performance. To perform the mission successfully, the satellite should be provided with the sufficient power until end of life. In this paper shows that electrical boxes' design characteristic, energy balance analysis and power performance in satellite real operation.

• Proceedings of the KIPE Conference
• /
• 2003.07a
• /
• pp.189-192
• /
• 2003

Electrical power in satellite system should persistently satisfy specified power requirement even though that happen the failure of solar array string or battery cell during the mission operation. In this study, the solar array and battery of GEO Communication Satellite with 3kW capacity are designed, and energy balance analysis according to power operation mode are performed to meet specified power capacity at the transfer orbit

• Culinary science and hospitality research
• /
• v.3
• /
• pp.165-179
• /
• 1997

Cost-volume-profit analysis shows the relationship between these factors. The figures expressed in a break-even chart can be used planning control and decision making. The relation ships can also be helpful in understanding how all costs must be covered in menu pricing. Involved in these relationship is the contribution to overhead and profit, or contribution ratio. This study used the food service operation of H hotel. Assumed the FC would be 10% of the High Volume, the VC would be 76% of the high volume. And in the CVP of individual meals, selected labor cost of the VC, assumed labor cost would be 35% of the volume.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1203_1204
• /
• 2009

Korean Tilting trains have tested on conventional lines since the beginning of 2007 for evaluating its reliability. We achieved some major performance tests which are the maximum operation speed 180km/h test and the maximum curves increasing speed with tilting operation test. In order to analysis reliability data of tilting train, we have used the special data aquisition system which consists of monitor, sensors and depot computer etc. As a results of calculation, until now we realized that the reliability are getting more increasing than starting point of running test.

• Proceedings of the KIEE Conference
• /
• 2006.11a
• /
• pp.378-380
• /
• 2006

Loss of excitation, over excitation and motoring of generator are simulated by using synchronous generator with an exciter and a governor. This paper presents an analysis of transient state of generator and protection relay operation with loss of excitation. over excitation and motoring of generator.