• Proceedings of the KSR Conference
• /
• 2009.05b
• /
• pp.341-347
• /
• 2009

In high speed railway, event recorder system stores a train speed and the related data for train operation in real time. Using those information, we can analysis the train operation and the reason of train accident. Analysis software gets the stored data from Event Recorder and shows the status of various signals related with train operation. Using it, also we can analysis the train operation before and after the given time. In this paper we propose the analysis software to show and analysis the operation of high speed train. The method of transferring the stored data from Event Recorder into Analysis Software is proposed. We develop the efficient procedure to store the transferred data into analysis system. Also the effective method to show the store data and to analysis them is studied for finding the cause of train accident.

• Proceedings of the KIPE Conference
• /
• 2011.07a
• /
• pp.251-252
• /
• 2011

This paper describes the development of hardware simulator for the operation analysis of DC microgrid, which has a wind power, solar power and fuel cell as a distributed generation, and a supercapacitor and battery as an energy storage. A detailed simulation model for the DC microgrid was developed for operation analysis. Based on simulation results a hardware simulator was built in the lab for the purpose of operation analysis. The developed hardware simulator can be utilized to evaluate with practical manner the performance of actual microgrid in the field.

• Journal of the Korean Society of Industry Convergence
• /
• v.27 no.4_2
• /
• pp.943-951
• /
• 2024

This paper considers the simulation-based installation and operation safety analysis of installation and operation machinery of USBL as underwater equipment in operation environments. The simulation model of this mechanical system was developed using flexible multibody dynamics simulation technology. Operation and environmental conditions were applied using dynamic forces model considering ocean environments. The developed simulation model was used to evaluate operation safety through eigenvalue analysis, dynamic forces analysis, and structural analysis. As the analysis results, the operation safety was very low in extreme operation condition due to increase of dynamic loads by VIV effect. It was not a problem because safety factor had more than 2.0 in this case. However, the operation safety should be further strengthened because the USBL and LARS was installed and utilized in unmanned vessel with automatic controls. In order to improve safety by avoiding VIV frequency, we redesigned the USBL pole.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.465-471
• /
• 2011

In order to make an feasibility analysis of such as rail and road transportation infrastructure, it is common to perform economic analysis. one of the most important thing is how to estimate the operation cost of freight rail because that is required during the analysis time period and sometimes that takes more cost than the construction cost. Therefore, this study is to perform the verification of freight rail operation cost which is applied to the economic analysis of railway investment analysis. for this, it is compared truck operation cost variation with freight rail operation cost, when freight volume is converted from road to railway. In conclusion the cost variation of railway part is bigger than road part so it is necessary to improve the operation cost of freight rail estimation process.

• Nuclear Engineering and Technology
• /
• v.41 no.5
• /
• pp.739-746
• /
• 2009

This paper introduces facility operation modeling and simulation based primarily on a discrete event system modeling scheme. Many modern industrial facilities are so complex that their operational status cannot be estimated by simple calculations. In general, a facility can consist of many processes and transfers of material between processes that may be modeled as a discrete event system. This paper introduces the current status of studies on operation modeling and simulation for typical nuclear facilities, along with some examples. In addition, this paper provides insights about how a discrete event system can be applied to a model for a nuclear facility. A headend facility is chosen for operation modeling and the simulation, and detailed procedure is thoroughly described from modeling to an analysis of discrete event results. These kinds of modeling and simulation are very important because they can contribute to facility design and operation in terms of prediction of system behavior, quantification of facility capacity, bottleneck identification and efficient operation scheduling.

• Journal of Information Technology Services
• /
• v.16 no.2
• /
• pp.45-60
• /
• 2017

The study suggests a contract model of application operation through case study of A bank's IT outsourcing application contract based on workload. The IT outsourcing order form has a problem in that the scope of work is ambiguous due to the integration of operation and maintenance. In this study, application operation and maintenance were separated by referring to application operation history provided in ISO/IEC15504-5 standard. The scope of the IT outsourcing service was clarified by organizing the definition and detail activities of the application operation business. Application operation contract method has generally applied estimation method by the number of input manpower and period by agreement between buyer and client. As there is no activity to calculate the number of input manpower based on the operational work history and based on the standard workload per activity. In this case is not guaranteed due to the simple agreement between the contractors. In this paper, we propose an application operating cost estimation model that measures the size of the operating software using function point analysis that is the basis of application operation tasks. In order to verify the validity of the application operation cost model, we verified the correlation between the application size and the labor cost through regression analysis using SPSS.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.8 no.1
• /
• pp.7-12
• /
• 2002

The air ventilation system of operation rooms has been studied to prevent the cross infection during the operation. Operation rooms and air ventilation systems of three University hospitals were investigated. The distribution of microbe was measured by cultivating air samples in the operation room. A two-dimensional model for the cross-section of an operation room was developed for the CFD(Computational Fluid Dynamics) analysis. The characteristics of air flow in the empty operation room and in occupied operation room were calculated by using a CFD program. The current diffuser location of an old hospital did not deliver the clean air to the operation part efficiently. A new method to locate diffusers that improve air venting with little increase of the cost of equipment was suggested.

• Journal of Environmental Science International
• /
• v.11 no.1
• /
• pp.63-68
• /
• 2002

In this study, we examined statistical analysis between sewage plant operations parameters and effluent quality We got six components from principle component analysis of the operation parameters and secondary effluent quality. 91.8% of the total variance was explained by the six components. The components were identified in the following order : 1) organic matter removal by aeration basin microbe, 2) settleability on secondary clarifier load, 3) removal of nutrients, 4) microbial number increasement and species diversity, 5) microbial activity in aeration basin, 6) oxidation in aeration basin.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.1516-1519
• /
• 1997

With disseminationof Distributed Control Systems(DCS), the huge amounts of process operation data could have been available and led to figure out process behaviors better on the statistical basis. Until now, the statistical modeling technology has been susally applied to process monitoring and fault diagnosis. however, it has been also thought that these process information, extracted from statistical analysis, might serve a great opportunity for process operation improvements and process improvements. This paper proposed a general methodolgy for process operation improvements including data analysis, backing up the result of analysis based on the methodology, and the mapping physical physical phenomena to the Principal Components(PC) which is the most distinguished feature in the methodology form traditional statistical analyses. The application of the proposed methodology to the Balst Furnace(BF) process has been presented for details. The BF process is one of the complicated processes, due to the highly nonlinear and correlated behaviors, and so the analysis for the process based on the mathematical modeling has been very difficult. So the statisitical analysis has come forward as a alternative way for the useful analysis. Using the proposed methodology, we could interpret the complicated process, the BF, better than any other mathematical methods and find the direction for process operation improvement. The direction of process operationimprovement, in the BF case, is to increase the fludization and the permeability, while decreasing the effect of tapping operation. These guide directions, with those physical meanings, could save fuel cost and process operator's pressure for proper actions, the better set point changes, in addition to the assistance with the better knowledge of the process. Open to set point change, the BF has a variety of steady state modes. In usual almost chemical processes are under the same situation with the BF in the point of multimode steady states. The proposed methodology focused on the application to the multimode steady state process such as the BF, consequently can be applied to any chemical processes set point changing whether operator intervened or not.

• The Bulletin of The Korean Astronomical Society
• /
• v.40 no.2
• /
• pp.60.1-60.1
• /
• 2015

We present the current operation status of StarDB web services by showing its user access statistics. The StarDB web services started its operation in late November, allowing world-wide users to access results of new variability analysis for Northern Sky Variability Survey light curves. New analysis results of various time-series data have been added to the StarDB services. Importantly, our services have supported a simple cone search, which is an internationally well-defined catalog search interface in the international Virtual Observatory systems. We have collected user access statistics such as how users find our analysis data since its operation in later November. We expect our analysis of the StarDB operation to help Korean community members who plan and operate their own web services preparing for a future era of big survey data.