• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1840-1845
• /
• 2005

The SoC and digital technology development recently enabled the emergence of information devices and control devices because the SoC present many advantages such as lower power consumption, greater reliability, and lower cost. It is required to use an embedded operating system for building control systems. So far, the Real-Time operating system is widely used to implement a Real-Time system since it meets developer's requirements. However, Real-Time operating systems reveal a lack of standards, expensive development, and license costs. Embedded Linux is able to overcome these disadvantages. In this paper, the implementation of control system platform using Real-Time Embedded Linux is described. As a control system platform, we use XScale of a Soc and build Real-Time control platform using RTAI and Real-Time device driver. Finally, we address the feasibility study of the Real-Time Embedded Linux as a Real-Time operating system for mobile robots.

• 제어로봇시스템학회논문지
• /
• 제12권2호
• /
• pp.194-200
• /
• 2006

The SoC and digital technology development recently enabled the emergence of information devices and control devices because the SoC presents many advantages such like lower power consumption, greater reliability, and lower cost. However, it is nearly impossible to use the SoC without operating systems because the SoC is included with many peripherals and complex architecture. It is required to use embedded operating systems and real-time operating systems may be used as an embedded operating system. So far, real-time operating systems are widely used to implement a Real-Time system since it meets developer's requirements. However, real-time operating systems have disadvantages including a lack of standards, expensive development, and license. Embedded Linux is able to overcome their disadvantages. In this paper, the implementation of control system platform for a mobile robot using real-time Embedded Linux is described. As a control hardware system platform, XScale board is used. As the real-time Embedded Linux, RTAI is adopted which is open source and royalty free, and supports various architectures and real-time devices, such like real-time CAN and real-time COM. This paper shows the implementation of RTAI on XScale board that means the porting procedure. We also applied the control system platform to the mobile robot and compared the Real-Time serial driver with non real-time serial driver. Experimental results show that that using RTAI is useful to build real-time control system with powerful functionalities of Linux.

• 한국항행학회논문지
• /
• 제28권2호
• /
• pp.210-215
• /
• 2024

선박의 자동화 수준이 높아지고 자율운항선박의 개발에 따라 선박의 IPMS (integrated platform management system)는 다양한 운영체제로 통제되는 개별 장비들을 통합하고 다량의 데이터를 실시간으로 처리해야 한다. 이러한 상황에서 데이터 처리를 위해 DDS (data distribution service) 미들웨어 기반 선박 IPMS 시뮬레이터를 개발하고 성능을 평가하였다. 이종 운영체제로 동작하고 있는 신호입출력장치와 IPMS 서버에서 초당 1,000개의 토픽을 비동기로 발간하고 구독한 시뮬레이션을 수행하였으며, 초기 4초 동안 일부 토픽의 누락을 제외하고는 오류 없이 데이터를 수신하였다. 개발된 시뮬레이터는 실제 선박에서 DDS를 이용하여 다른 제어체계를 통합할 수 있음을 보여준다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 ITC-CSCC -2
• /
• pp.723-726
• /
• 2000

In this paper, we present an abstract object-oriented plat-form model .suitable for the real-time distributed telecommunication system. The proposed platform is constructed upon the extended version of the real-time, distributed operating system, SROS(Scalable Real-time Operating System), that is developed at ETRI and successfully operated in the ATM switching system for several years. The object-oriented software development and maintenance methodology will resolve the current software crisis in the area of telecommunication and switching systems due to the everlasting maintenance about the huge amount of the existing software and the ever increasing needs for the better and new communication services. In general, an object-oriented software platform realizes the object-oriented methodology and possesses many good aspects like high productivity, better reusability, easy maintenance, et at. The platform is also designed to present the distributed multimedia service in addition to real-time event delivery. Recently, we have been implementing a couple of prototype bated on the proposed platform. Reflecting the evaluation results from these prototypes, the final platform specification will be determined.

• Asia pacific journal of information systems
• /
• 제34권1호
• /
• pp.150-190
• /
• 2024

This article proposes a framework to elucidate the structural dynamics of the generative AI ecosystem. It also outlines the practical application of this proposed framework through illustrative policies, with a specific emphasis on the development of the Korean generative AI ecosystem and its implications of platform strategies at AI platform-squared. We propose a comprehensive classification scheme within generative AI ecosystems, including app builders, technology partners, app stores, foundational AI models operating as operating systems, cloud services, and chip manufacturers. The market competitiveness for both app builders and technology partners will be highly contingent on their ability to effectively navigate the customer decision journey (CDJ) while offering localized services that fill the gaps left by foundational models. The strategically important platform of platforms in the generative AI ecosystem (i.e., AI platform-squared) is constituted by app stores, foundational AIs as operating systems, and cloud services. A few companies, primarily in the U.S. and China, are projected to dominate this AI platform squared, and consequently, they are likely to become the primary targets of non-market strategies by diverse governments and communities. Korea still has chances in AI platform-squared, but the window of opportunities is narrowing. A cautious approach is necessary when considering potential regulations for domestic large AI models and platforms. Hastily importing foreign regulatory frameworks and non-market strategies, such as those from Europe, could overlook the essential hierarchical structure that our framework underscores. Our study suggests a clear strategic pathway for Korea to emerge as a generative AI powerhouse. As one of the few countries boasting significant companies within the foundational AI models (which need to collaborate with each other) and chip manufacturing sectors, it is vital for Korea to leverage its unique position and strategically penetrate the platform-squared segment-app stores, operating systems, and cloud services. Given the potential network effects and winner-takes-all dynamics in AI platform-squared, this endeavor is of immediate urgency. To facilitate this transition, it is recommended that the government implement promotional policies that strategically nurture these AI platform-squared, rather than restrict them through regulations and stakeholder pressures.

• 통상정보연구
• /
• 제6권2호
• /
• pp.107-127
• /
• 2004

The rapid development of internet information technology has increased interest in e-Trade these days, but it is not activated greatly up to now. In order to promote e-Trade, it is essential to construct cooperative process such as connecting systems among trade related parties. Building e-Trade platform which is based on the infrastructure of the past trade automatic system is key point of promoting e-Trade. To do this, a study on the basic concept and specific components of e-Trade platform is needed absolutely. At this point of view, after this paper has examined domestic and foreign studies on the fundamental technologies about electronic commerce, it drew several key technologies that could be applied to e-Trade considering the current IT trend. Then it evaluates these technologies according to Technology Reference Model(TRM) of the National Computerization Agency. This will help us to show the operation strategy as well as the concept of future e-Trade platform and its composition. On the basis of the theoretical background, this paper classified NCA's technology model into 6 fields, which are application. data, platform, communication, security and management. Considering the key technologies, e-Trade platform has to be mutually connected and accept international standards such as XML. In the aspect of business side, trade relative agencies' business process as well as trading company's process has to be considered. Therefore, e-Trade platform can be classified into 3 parts which are service, infrastructure and connection. Infrastructure part is compared of circulating and managing system of electronic document, interface and service framework. Connecting service (application service) and additional service (application service) consist of service part. Connecting part is a linking mutual parts and can be divided into B2B service and B20 service. The organization operating this e-trade platform must have few responsibilities and requirements. It needs to positively accept existing infrastructure of trade automatic system and improving the system to complete e-trade platform. It also have to continuously develop new services and possess ability to operate the system for providing proper services to demanders. As a result, private sector that can play a role as TTP(Third Trust Party) is adequate for operating the system. In this case, revising law is necessary to support the responsibility and requirement of private sector.

• 제어로봇시스템학회논문지
• /
• 제14권1호
• /
• pp.13-20
• /
• 2008

Sensor network consists of a large number of sensor node distributed in the environment being sensed and controlled. The resource-constrained sensor nodes tend to have various and heterogeneous architecture. Thus, it is important to make its software environment platform-independent and reprogrammable. In this paper, we present BeeVM, a Java operating system designed for sensor networks. BeeVM offers a platform-independent Java programming environment with its efficiently executable file format and a set of class APIs for basic operating functions, sensing and wireless networking. BeeVM's high-level native interface and layered network subsystem allow complex program for sensor network to be short and readable. Our platform has been ported on two currently popular hardware platforms and we show its effectiveness through the evaluation of a simple application.

• 한국정보통신학회논문지
• /
• 제10권1호
• /
• pp.156-163
• /
• 2006

본 고에서는 임베디드 시스템을 위한 운영체제를 평가하고 성능을 검사하는 것을 주안점으로 삼고 있으며 현재 상용화 되어있는 윈도우즈 플래포움을 기초로 하고 있다. 전형적인 컴퓨터의 workload 이용하고 시스템성능을 증가시키는 운영체제의 벤치마킹의 분석을 포함한 기본적인 방법과 동시에 하위레벨에서의 규명을 이루고 있다. 본 고에서는 "WinStone"과 "HBench" 같은 선택되어진 어플리케이션 중심과 직접적으로 시스템에 영향을 끼치는 가장최선의 벤치마킹툴이 사용되었다. 이 실험과 케이스 연구를 통하여 벤치마킹툴을 이용하여 윈도우즈 플래포움의 하위레벨 테스트와 동시에 어플리케이션 레벨의 임베디드 마이크로시스템의 성능을 보여 주고 있다.

• 대한임베디드공학회논문지
• /
• 제2권4호
• /
• pp.242-250
• /
• 2007

Wireless sensor networks are subject to highly heterogeneous system requirements in terms of their functionality and performance due to their broad application areas. Though the heterogeneity hinders the opportunity of developing a single universal platform for sensor networks, efforts to provide uniform, inter-operable and scalable ones for sensor networks are still essential for the growth of the industry as well as their technological advance. As a part of our work to develop such a robust platform, this paper presents the software architecture for sensor nodes with focus on our sensor node operating system and its configuration methodology. Addressing principle issues in its design space which includes programming, execution, task scheduling and software layer models, our architecture is highly reconfigurable with respect to system resources and functional requirements and also highly efficient in supporting multi-threading under small system resources.

• 대한인간공학회지
• /
• 제7권1호
• /
• pp.45-52
• /
• 1988

An instrumentation system for the automatic measurement of body sway has been developed. The system consists of a force platform, amplifiers, and data acquisition and display software, operating on a computer. We used only the force platform and electronic amplifying unit in Kistler Biomechanics System to obtain precise measurements, and developed the data acquisition and analysis software using an IBM PC With 12 bit A/D converter. The system can be used in various specialized disciplines, such as ergonomics, rehabilitation, neuromuscular control, as well as sprots biomechanics.