• Proceedings of the KSR Conference
• /
• 2004.06a
• /
• pp.1297-1302
• /
• 2004

In DC power distribution system for urban rail transits potential relay, 64P, is used to detect the ground faults. The problem with this 64P is that though it detects the ground fault it cannot identify the faulted region. Therefore the faulted region cannot be isolated properly. It could results in power loss of the trains on the healthy regions and the safety of the passengers in the trains could be affected adversely. A new ground fault protective relaying scheme that can identify the faulted region is presented in this paper. The new concept uses the current differential scheme and the permissive scheme to identify the faulted region correctly. A device with similar characteristic to the arrestor is adapted to use the current relay for the ground fault detection. The role of the device is to block the ground leakage current in normal operating condition and enable the ground fault current to flow in ground fault condition. The algorithm of the new relay and the effect of the newly adapted device in the new relaying scheme are discussed.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.41 no.2
• /
• pp.134-139
• /
• 2008

To improve the oxygen-deficient water mass (ODW), the spatial and temporal variation in the water quality and characteristic of ODW occurrence were analyzed using yearly water quality data from 1989 to 2006 in Jinhae Bay, Korea. In addition, we estimated $ODW_{area},\;ODW_{vol.}$ and $ODW_R$ for Jinhae Bay. The overall water quality improved during the 2000s, based the annual variation in dissolved oxygen, chemical oxygen demand, etc. A cluster analysis classified Jinhae Bay into the southwestern, central, northern, and eastern regions. ODW occurred throughout the southwestern region in 1993 and 2002-2004, and the estimated $ODW_{vol.}$ was about $1.92km^3$. ODW did not occur in the eastern region because circulating seawater was exchanged in that part of Jinhae Bay. As ODW was generated every year in the southwestern region, this is the most polluted area in Jinhae Bay. The ODWR decreased in the northern region, showing that the water quality there has improved since a wastewater treatment plant began operating in 1994.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.43 no.7
• /
• pp.1127-1134
• /
• 1994

The analytical model for the induced Hall field in the magnetotransistor considering the diffusion of carriers has been proposed and verified by experiment and simulation. Previous models for the induced Hall field in the magnetotransistor do not consider the influence of the diffusion carrier transport. However, the carrier diffusion in the base region of magnetotransistors cannot be neglected and should be considered to evaluated the Hall field in the magnetotransistors accurately. We have measured the Hall voltage in the base region of the fabricated magnetotransistors. The measured values have been compared with the numerical results evaluated from our diffusion model as well as the calculated results from the conventional model. The evaluated Hall voltage from the diffusion model agrees well with the measured values while the sign of the Hall voltage calculated by the conventional model is opposite to that of the measured values in the saturation region. This discrepancy is due to the fact that the diffusion model considers the carrier diffusion while the conventional one does not. The Hall field model including the influence of carrier diffusion may be an important tool to optimize the device structure and to understand the operating principle of the magnetotransistor.

• Tribology and Lubricants
• /
• v.35 no.4
• /
• pp.244-266
• /
• 2019

The purpose of this study is to estimate the wear volumes of engine journal bearings operating at variable angular velocity of a shaft in the beginning of firing start-up cycle. To do this, first we find the potential region of wear scar on engine journal bearings where the applied bearing load and crank shaft velocity are variable. The potential wear regions are discovered by finding minimum oil film thickness at every crank angle existing below most oil film thickness scaring wear (MOFTSW) obtained based on the concept of the centerline average surface roughness. Then we calculate the wear volume from the wear depth and two wear angles decided by the magnitude of each film thickness lower than MOFTSW at every crank angle. The results show that the expected wear region is located at a few bearing angles after and/or behind the upper center of a big-end bearing and the lower center of a main bearing. And the real wear region is similar to the estimated wear region. Further we find that the wear scar on an engine journal bearing may occur at re-starting time after switch-off of a start motor especially under the condition of high oil temperature.

• Journal of Distribution Science
• /
• v.14 no.11
• /
• pp.75-82
• /
• 2016

Purpose - In order for actively pursuing medium and long term policies of Gangwon region to be effectively and efficiently driven, efficacious and practical development strategies are needed. In terms of regional revitalization in most regions that are dependent on the primary industry like Gangwon-do Province, the maintaining of local community becomes difficult and there are limitations on the support from the central government and local governments. Therefore, local communities need to implement measures not only to be financially independent but also maintain and activate themselves. And community business can be adopted to be a proper strategy to cope with this change. This study drew importance of a community business model appropriate for Gangwon-do region to figure out success factors. Research design, data, and methodology - This study aimed to come up with importance of community business model for Gangwon-do region by using AHP Method. AHP Method, which was developed by Professor Saaty in 1970', is a methodology to simplify complex problems for a rational decision making. A survey targeting related public officials and expert group was carried out and a total of 30 questionnaires were collected for the analysis. Results - Analysis model used in this study was to prioritize community business models of Gangwon-do region. The second hierarchy was divided according to local restoration type, local resource utilization type, environment improvement type, and life support type. The third hierarchy consisted of 5 items such as network, the middle structure, program, government support, and human resources to measure each importance. As a result, in the second hierarchy, local resource utilization type had the highest importance. In the third hierarchy, the middle structure had the highest importance, followed by government support, program, network, and human resources. Collectively, the results suggested that important critical factors of community business model of Gangwon-do region was the importance of local resource utilization model and the middle structure. Conclusions - Not only should projects that are already operating in the region but next community business projects that are planning in the Gangwon-do region should be practically operated in view of the importance and the models derived from this study.

• Journal of KSNVE
• /
• v.7 no.4
• /
• pp.645-653
• /
• 1997

For high performance rotating machinery, unstable vibrations may occur caused by hydrodynamic forces such as oil film forces, clearance excitation forces generated by the working fluid, and etc. In order to improve the availability one has to take into account the vibrations very accurately. When designing a rotating machinery, the stability behavior and the resonance response can be obtained by calculation of the complex eigenvalues. A suitable modifications of seal and/or bearing design may effectively improve the stability and the response of a rotor system. This paper deals with the optimum length and clearance of seals and bearings to minimize the resonance response(Q factor) and to maximize the logarithmic decrement in the operating speed under the constraints of design variables. Also, for an avoidance of resonance region from the operating speed, an optimization technique has been used to yield the critical speeds as far from the operating speed as possible. The optimization method is used by the genetic algorithm, which is a search algorithm based on the mechanics of natural selection and natural genetics. The results show that the optimum design of seals and bearings can significantly improve the resonance and the stability of the pump rotor system.

• The Journal of Asian Finance, Economics and Business
• /
• v.9 no.1
• /
• pp.299-310
• /
• 2022

Environmental protection has been infused into the development of numerous fields by the Chinese government. The government's implementation of green development has also shifted its focus to green transformation and governance of highpolluting companies. In the context of green and sustainable development, this study employs DEA data envelopment analysis to compare the operating efficiency of listed firms that implemented Green Mergers and Acquisitions (M&A) in China in 2018. The conclusions of this study are as follows: First, China's green M&A enterprises are unevenly dispersed among the country's east, middle, and western regions. Second, compared to before the implementation of Green M&A, operational efficiency has improved in most industries. Third, the difference in Green M&A across industries is generally favorable, showing that most organizations have improved their operational performance as a result of Green M&A implementation. In 2018, however, the gap in operating efficiency is more negative. Fourth, whereas the eastern and western areas' operational efficiency has improved as a result of Green M&A, the central region's has not. Based on this conclusion, this study makes recommendations for China's future sustainable development of heavily polluted firms.

• KIEE International Transactions on Electrophysics and Applications
• /
• v.4C no.5
• /
• pp.201-206
• /
• 2004

In order to investigate the optimum conditions for the effective ozone formation in a dielectric barrier discharge, measurements of ozone concentration were carried out for various conditions such as the gap length, the dielectric material and the operating gas. It was found that the optimum discharge conditions differed exceedingly in the types of operating gases and dielectric materials. In dry air, dielectric material with low dielectric constant and thermal conductivity, which might contribute to the restriction of the gas temperature rise in the discharge region, proved effective in obtaining both high ozone yield and concentration. The optimum gap length was considered to be in the range of 600-800 mm. In oxygen, using a quartz glass disk as a dielectric material, the required condition to obtain the high ozone yield and concentration was expanded.

• International Journal of Control, Automation, and Systems
• /
• v.4 no.6
• /
• pp.669-681
• /
• 2006

In this work, a new method of design adaptive controllers for SISO systems based on multiple models and switching is presented. The controller selects the model from a given set, according to a switching rule based on output prediction errors. The goal is to design, at each sample instant, a predictive control law that ensures the robust stability of the closed-loop system and achieves the best performance for the current operating point. At each sample the proposed control scheme identifies a set of linear models that best characterizes the dynamics of the current operating region. Then, it carries out an automatic reconfiguration of the controller to achieve the best possible performance whilst providing a guarantee of robust closed-loop stability. The results are illustrated by simulations a nonlinear continuous and stirred tank reactor.

• ETRI Journal
• /
• v.32 no.2
• /
• pp.319-326
• /
• 2010

Photonics offers a solution to data communication between logic devices in computing systems; however, the integration of photonic components into electronic chips is rather limited due to their size incompatibility. Dimensions of photonic components are therefore being forced to be scaled down dramatically to achieve a much higher system performance. To integrate these nano-photonic components, surface plasmon-polaritons and/or energy transfer mechanisms are used to form plasmonic chips. In this paper, the operating principle of plasmonic waveguide devices is reviewed within the mid-infrared spectral region at the 2 ${\mu}m$ to 5 ${\mu}m$ range, including lossless signal propagation by introducing gain. Experimental results demonstrate that these plasmonic devices, of sizes approximately half of the operating free-space wavelengths, require less gain to achieve lossless propagation. Through optimization of device performance by means of methods such as the use of new plasmonic waveguide materials that exhibit a much lower minimal loss value, these plasmonic devices can significantly impact electronic systems used in data communications, signal processing, and sensors industries.