• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 춘계학술대회 논문집
• /
• pp.14-18
• /
• 1996

From the experimental study of Wire-Cut EDM of die-material(SKD-11), machining characteristics such as machining rate, surface roughness and hardness have been observed and evaluated under the conditions varing pulse on time, pulse off time, peak voltage after fixing other conditions. It was found that various operating conditions have significant influences on machining rate, surface roughness. Hardness of workpiece was unaffected by operating conditions.

• Journal of the Korean Data and Information Science Society
• /
• 제10권2호
• /
• pp.437-444
• /
• 1999

상수형 고장률을 갖는 시스템에 대하여 일정한 구간별로 비복원(복원)으로 시스템의 고장여부를 관찰하여 얻은 수명자료를 이용한 시스템 고장률 관리도를 제안하고 OC곡선(operating-characteristic curve)을 이용하여 제안된 관리도의 성능을 고찰하였다.

• 품질경영학회지
• /
• 제14권2호
• /
• pp.21-27
• /
• 1986

This paper deals with a continuous review (s,S) spare part inventory system. The distributions of service life of each part and the replenishment lead time are assumed to be exponential. Assuming that there is never more than a single order outstanding, we obtain the average annual cost of operating the inventory system. If the length of stockout period is small enough to be neglected compared to the length of operating period, the optimal operating policy variables minimizing the cost rate can be calculated iteratively. For the case of one-for-one ordering (that is, s=S-1), an exact cost rate, and a closed form decision rule minimizing the cost rate are obtained for a more general situation in which more than one order is allowed to be outstanding and the distribution of the replenishment lead time is general.

• 전자공학회논문지B
• /
• 제32B권10호
• /
• pp.1280-1285
• /
• 1995

In this paper the optimized overlap driving scheme for improving the reduction problem of the operating voltage range occured by the overlap driving scheme proposed precedently and increasing the contrast ratio of screen image in the simple matrix LCDs is proposed. The characteristic estimation of the proposed method was performed in a condition that the number of scan electrodes was 120 and the threshold voltage of LC pixel was 2V and the overlap rate of scan signal was varied from 0% to 40% . As a result of estimation compared with the overlap driving scheme proposed precedently, this new method was certified as a method which it could increase the operating voltage range of the LC pixel by 16% in 20% overlap condition and it's operating voltage range was also increased very much with the increase of the overlap rate. Consequently this newly proposed method was certified as a method which it could maintain the improvement effect of the operating characteristics obtained by the overlap driving scheme proposed precedently with the big improvement in the contrast ratio of screen image.

• 보건행정학회지
• /
• 제13권3호
• /
• pp.129-147
• /
• 2003

This study is to grasp a trend of profitability classified by characteristics of hospitals and to analyze related factors. Subjects are 145 hospitals which have gotten the standardization audit by Korean Hospital Association during 1998-200l. Profitability was measured in the aspect of operation profit rate with operating margin to gross revenue as proxy variables. Independent variables were classified by general factors (ownership, number of beds, period of establishment, competition), financial factors (liabilities to total assets, current ratio, fixed ratio, total asset turnover, inventories turnover), and factors related to patient treatment (average length of stay, bed occupancy rate, new outpatient ratio, admission ratio of outpatients, number of patients per specialist, personnel costs per adjusted inpatient, administrative costs per adjusted inpatient). Hierarchical multiple regression analysis model was used in this study. As a result of hierarchical multiple regression analyzation of operating margin to gross revenue, adjustive $R^2$ of general factors was relatively more powerful. The factors had significant effect on operating margin to gross revenue were ownership(+), number of beds(+), competition(+), current ratio(+), fixed ratio(+), total asset turnover(+), personnel costs per adjusted inpatient(-).

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2013년도 제46회 KOSCO SYMPOSIUM 초록집
• /
• pp.33-35
• /
• 2013

The present work is an experimental investigation on potential operating range using directly injected gasoline fuel in a single-cylinder compression ignition (CI) engine. The objectives of present study were to apply auto-ignited combustion to gasoline fuel and to evaluate potential operating range. In order to auto-ignite gasoline fuel in CI engine, the fuel direct-injection system and the intake air system were modified that a flow rate and temperature of intake air were regulated. The heat-release rate (HRR), net indicated mean effective pressure (IMEP), start of combustion (SOC), and combustion duration were derived from in-cylinder pressure data in a test engine, which has 373.33cc displacement volume and 17.8 compression ratio. The exhaust emission characteristics were obtained emission gas analyzer and smoke meter on the exhaust line system.

• 한국수소및신에너지학회논문집
• /
• 제20권3호
• /
• pp.256-263
• /
• 2009

The operating range of HCCI engine is narrow due to excessive rate of pressure rise on high load. The fuel stratification is proposed to solve the problem. The purpose of this study is to gain a better understanding of the effects of fuel stratification on reducing the pressure-rise rate at high load in HCCI combustion and to investigate that the operating range is expanded for fuel stratification in the preceding condition of initial temperature and equivalence ratios. The engine is fueled with Di-Methyl Ether (DME) which has unique 2-stage heat release. The computations were conducted using SENKIN application of the CHEMKINll kinetics rate code. Calculation result shows that proper fuel stratification prolongs combustion duration and reduce pressure rise rate.

• 상하수도학회지
• /
• 제22권3호
• /
• pp.307-314
• /
• 2008

In this study, the effects of applied voltage, solution pH and coexistence of other ions such as sulfate ion (${SO_4}^{2-}$) and chloride ion ($Cl^-$) were investigated on the removal of nitrate-nitrogen ($NO_3{^-}-N$) from ground water by electrodialysis. The examined operating conditions were evaluated for optimizing the removal efficiency of $NO_3{^-}-N$. Real ground water samples taken from a rural area of Yongin city and artificial ones with components similar to the real ground water were tested for the study, which contained $NO_3{^-}-N$ concentration of 17mg/L that exceeds current drinking water quality standard of 10 mg/L. The increase in the removal rate of $NO_3{^-}-N$ was observed as the applied voltage increased from 5V to 30V, while no significant increase in the removal rate appeared at the applied voltage beyond 20V during a given operating time. The removal rate appeared to get lower at both acidic and basic condition, compared to neutral pH. Coexistence of of ${SO_4}^{2-}$and $Cl^-$ demanded much longer operating time to achieve a given removal rate or to meet a certain level of treated water concentration. When nitrate ion was combined with ${SO_4}^{2-}$and $Cl^-$, the removal rate was reduced by 4.29% and 10.83%, respectively.

• 산업경영시스템학회지
• /
• 제42권3호
• /
• pp.61-69
• /
• 2019

The concept of carsharing involves sharing a small number of reserved cars to be used individually by a larger number of people as required. This study examines the operating parameters of one-way carsharing systems in order to determine the appropriate operating conditions that minimizes the lost sales rate. Five operating parameters are tested in this study: the number of stations, the average number of vehicles per station, the rate of one-way trip, the average number of staffs per station, and the relocation policy. The performance of round-trip carsharing systems is also compared to that of one-way carsharing systems. A simulation model is developed and simulations are performed to determine the appropriate combination of operating parameter and levels. The simulation results show that the average number of vehicles per station is the most critical parameter. Other key findings obtained from this research are as follows. First, applying the appropriate relocation policy to one-way carsharing systems can allow more customers to rent vehicles than the traditional round-trip carsharing systems. Second, the appropriate relocation policy should be selected based on the average number of vehicles per station in order to minimize the lost sales rate. Third, the number of stations does not affect the lost sales rate. This study findings will provide tools to understand impact of the carsharing system parameters on the efficiency of the carsharing operations.

• 한국수소및신에너지학회논문집
• /
• 제33권4호
• /
• pp.419-429
• /
• 2022

Effects of operating variables on temperature profile and performance of 3 MWth chemical looping combustion system were estimated by mass and energy balance analysis based on configuration and dimension of the system determined by design tool. Air reactor gas velocity, fuel reactor gas velocity, solid circulation rate, and solid input percentage to fluidized bed heat exchanger were considered as representative operating variables. Overall heat output and oxygen concentration in the exhaust gas from the air reactor increased but temperature difference decreased as air reactor gas velocity increased. Overall heat output, required solid circulation rate, and temperature difference increased as fuel reactor gas velocity increased. However, overall heat output and temperature difference decreased as solid circulation rate increased. Temperature difference decreased as solid circulation rate through the fluidized bed heat exchanger increased. Effect of each variables on temperature profile and performance can be determined and these results will be helpful to determine operating range of each variable.