• Smart Structures and Systems
• /
• 제22권3호
• /
• pp.259-276
• /
• 2018

This paper studies the energies and energy release rate (ERR) for the initially rotationally symmetric compressed (or stretched) in the inward (outward) radial direction of the PZT/Elastic/PZT sandwich circular plate with interface penny-shaped cracks. The investigations are made by utilizing the so-called three-dimensional linearized field equations and relations of electro-elasticity for piezoelectric materials. The quantities related to the initial stress state are determined within the scope of the classical linear theory of piezoelectricity. Mathematical formulation of the corresponding problem and determination of the quantities related to the stress-strain state which appear as a result of the action of the uniformly normal additional opening forces acting on the penny-shaped crack's edges are made within the scope of the aforementioned three-dimensional linearized field equations solution which is obtained with the use of the FEM modelling. Numerical results of the energies and ERR and the influence of the problem parameters on these quantities are presented and discussed for the PZT- 5H/Al/PZT-5H, PZT-4/Al/PZT-4, $BaTiO_3/Al/BaTiO_3$ and PZT-5H/StPZT-5H sandwich plates. In particular, it is established that the magnitude of the influence of the piezoelectricity and initial loading on the ERR increases with crack radius length.

• 한국정밀공학회지
• /
• 제18권9호
• /
• pp.131-139
• /
• 2001

The use of fracture mechanics has traditionally concentrated on crack growth under an opening mechanism. However, many service failure occur from cracks subjected to mixed mode loadings. Hence, it is necessary to evaluate the fatigue behavior under mixed mode loading. Under mixed mode loading conditions, not only the fatigue crack propagation rate is of importance, but also the crack propagation direction. The mode I and II stress intensity factors of CTS specimen were calculated using elastic finite element method. The propagation behavior of the fatigue crack of the STS304 steeds under mixed mode loading condition was evacuated by using stress intensity factors $K_I$ and $K_II. The MTS criterion and effective stress intensity factor were applied to predict the crack propagation direction and the fatigue crack propagation rate.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2009년도 하계학술발표대회 논문집
• /
• pp.1491-1496
• /
• 2009

Fluid flow and structural analyses of an electronic expansion valve (EEV) using CO2 as a working refrigerant are carried out to estimate the mass flow rate and maximum stress. An engineering sample EEV that the orifice diameter is 1.8 mm was fabricated. The mass flow rates were measured at various EEV inlet temperatures and pressures for several EEV openings using experimental heat pump system. The sample EEV has over 35 MPa burst pressure and the maximum mass flow rate of CO2 through the EEV increased to 100 g/s at full opening condition.

• Journal of the Korean Wood Science and Technology
• /
• 제50권3호
• /
• pp.167-178
• /
• 2022

To investigate the influence of manufacturing environment on bonding performance of mixed cross laminated wood (CLT) using polyurethane (PUR) adhesive, a boiling water soak delamination test according to the temperature and relative humidity was conducted. The 5-ply mixed CLT consisted of Japanese Larch for external and middle layer and yellow poplar for internal layer. The PUR adhesives with different opening times of 10 and 30 minutes were used. The mixed CLT was manufactured according to pressing times of PUR and manufacturing environments of summer and winter. In case of summer environment, the delamination rate of the mixed CLT with pressing time of 4 hours using a PUR adhesive with open time of 10 minutes met the requirements of KS F 2081. In case of winter environment, the delamination rate of the mixed CLT didn't meet the requirements of KS standard. However, it was possible to confirm the effect of improving the adhesive performance by adjusting the pressing time according to the open time of the adhesive under the manufacturing conditions. The delamination rate of CLT with open time 30 minutes PUR, manufactured by indirect moisture supply methods was 11.2% better than direct moisture supply methods. As a result of delamination test in the same condition of relative humidity and adhesive, it was found that the temperature of manufacturing environment influences the adhesive performance.

• Steel and Composite Structures
• /
• 제50권4호
• /
• pp.419-428
• /
• 2024

Prefabricated partially-encased composite (PEC) structural component is widely used in construction industry due to its superior structural performance and easy assembly characteristic. However, the solid web in traditional PEC components tends to split concrete into two halves, thus potentially reduces structural integrity and requires double concrete pouring. To overcome the above disadvantages, a new PEC beam with open-web π-shaped steel is proposed in this paper. Four open-web PEC beams with varying sectional height, flange thickness and web void rate were constructed and tested under flexural loads. During experimental tests, all beams exhibited typical flexural failure modes with strong moment capacities and excellent ductility. Owing to the unique construction form of web opening, steel-concrete bonding properties were enhanced and very small relative steel-concrete slips were observed. Experimental results also showed that the flexural capacity of such PEC beams increased with the increase of the sectional height and flange thickness, while was not affected by the web void rate. At last, a flexural capacity formula of the open-web PEC beam was proposed based on the whole section plastic rule. The formula results agreed well with experimental results.

• 수산해양기술연구
• /
• 제39권1호
• /
• pp.33-43
• /
• 2003

본 연구는 현재 국내에서 사용되는 쌍끌이 중층망 어구어법에서 문제점으로 지적되고 있는 고속예망에서 망고의 제어가 어렵다는 점, 망목에 뜸이 걸려서 파망이 자주 일어나는 점, 네트드럼에 감기는 어구부피가 너무 크다는 점 등의 해결방법으로 무부자 쌍끌이 중층망의 모형실험을 통하여 우리 나라 쌍끌이 중층망에 대한 적용 가능성을 검토하는데 있다. 이를 위하여 850ps급 쌍끌이 기선저인망어선에서 현재 사용되는 실물망을 1/100로 축소 제작한 모형망에서 뜸을 모두 제거하고 끌줄을 양쪽으로 각각 두가닥으로 분리한 후 추를 부착하여 아래끌줄의 길이를 조절함으로써 망고를 제어할 수 있는 무부자 쌍끌이 중층망의 모형어구를 제작하여 회류수조에서 유속에 대한 아래끌줄의 길이에 따른 어구의 전개성능 등을 규명하고 기준형과 비교 분석한 결과를 요약하면 다음과 같다. 1. 유체저항은 무부자망이 기준형보다 약 10∼20%정도 작았으며, 무부자망의 유체저항은 동일유속에서 아래끌줄이 길어짐에 따라 약 1ton씩 증가하였다. 또, 동일유속에서 dL이 10m씩 증가함에 따라 아래끌줄에 작용하는 저항은 약 5%씩 감소하고, 그 반면에 윗 끌줄에 작용하는 저항이 증가하였다. 2. 망고는 직선에 가까운 지수함수적으로 감소하는 경향을 보였으며, 동일유속에서 아래끌줄이 길어짐에 따라 증가하여 로그함수적인 경향을 보였다. 또한, 망고감소율은 무부자망의 경우가 기준형보다 작게 나타났으며, 그 차이는 유속이 증가함에 따라 더욱 커져 dL이 30m인 무부자망을 기준으로 3.0knot일 때 12%, 4.0knot일 때 25%로 나타났다. 3. 망폭은 유속이 증가함에 따라 약 2m 내외로 거의 일정하였으며 무부자망이 기준형보다 크게 나타났다. 4. 망구면적은 유속이 증가함에 따라 지수함수적으로 감소하는 경향을 보였으며, 망구면적의 감소율은 기준형보다 무부자망이 더 작게 나타났다. 여과량은 유속이 증가함에 따라 로그함수적인 경향을 보였으며 기준형이 3.0knot 이상에서 급격히 감소하였지만, 무부자망은 4.0knot까지 증가하였다가 완만하게 감소하였다. 5. dL의 최대적정길이는 망구면적 및 여과량이 최대인 30m일 때이며, 추의 최적위치는 4개의 그물목줄이 연결되는 지점이었다.

• Composites Research
• /
• 제12권5호
• /
• pp.40-53
• /
• 1999

저속시험 및 약 11.4m/s까지의 고속시험을 받는 다방향 탄소섬유/에폭시 복합적층판의 층간파괴거동에 대해 양외팔보(DCB)시험편을 이용하여 연구했다. 모드I의 하중을 1.0m/s이상으로 가한 결과 하중-시간곡선에 동적효과가 발생하여, 시험속도에 비례하는 단순관게식으로 예상되는 것보다 더 큰 균열속도가 나타났다. 시험편 개구변위와 균열길이만을 사용하는 수정된 선형보해석식은 동적인 층간파괴에너지$G_{IC}$를 평가하기 위해 유효했다. 또한 굽힘탕선계수의 실측값은 시험속도의 증가에 다라 증가했는데, 이를 $G_{IC}$의 평가시에 고려했다. 시험속도가 1.0m/s까지 증가할 때, 균열개시 및 정지시의 $G_{IC}$값은 변화가 없었으나, 11.4m/s의 속도에서 최대 GIC값은 섬유가교효과의 증대로 크게 증가했다. 또한 초기균열길이가 길수록 고속시의 최대GIC값은 저하했다.

• 한국중재학회지:중재연구
• /
• 제20권3호
• /
• pp.93-120
• /
• 2010

In 1978, Chinese reform and opening caused a big changes in Chinese labor relationship. Through reforming and opening, China gave up part of state ownership system and group ownership system, permitted private ownership system, and also opened the way for capitalists to ride again. Since China was established, the labor relationship ceased for 30 years has been appeared. However because the top priority aim of China's reform was economic growth, the protection of the rights and interests of labor was pushed back on the policy priority list. China takes foreign capitals based on cheap labor force quickly and China come up the worldwide plants. Since reformed, China keeps an economic growth rate of 9.7% annually for 30years. This economic growth is based on labor's sacrifice. However, Chinese fast economic growth causes side effects such as increasement of the gap between the wealthy and the poor, increasement of unbalanced development between regions, and the increasement of conflict between labor and management. Especially, according to changes in labors' level of consciousness, the labors recognized that their rights and interests are exploited by employers. Therefore, the labor dispute is continuously increasing. Chinese government changes their policy from the policy focusing on enterprise development to the policy protecting labor's rights and interests. In order to protect labor's rights and interests, China conducts labor contract law and labor dispute conciliation arbitration law in 2008. This kind of changes in Chinese labor environment affect a lot to Korean companies which already entered into China or are willing to enter. According to studying on present situation and resolution system in Chinese labor dispute, this paper suggests the proper countermeasure related to labor dispute of Korean companies which entered in China. First, the success rate of labor dispute conciliation by enterprise labor dispute conciliation committee is around 20% during recent several years and the success rate by year is in decline. Therefore, when labor dispute is occurred, our companies which entered into China better use other labor dispute methods such as negotiation and arbitration than conciliation in order to settle a conflict. Second, from the Korean enterprises entered in China point of view, there exists a problem not to sue except special cases which provided in the law even though they are dissatisfied with arbitrate judgment. Thus, when labor dispute occurred, Korean enterprises try to do best to settle the dispute through negotiation. However, in case of that the dispute cannot be settled by negotiation, they have to attend in the arbitration as if it is a last chance. Third, Korean enterprises keep in mind that dispute handling procedures between labor union and users or between labor group and users are different, and then deal with separately. Thus, dispute between labor and users have to follow arbitrate procedures as a necessary procedure, but in case of dispute related to group contract, namely dispute against labor union, labor dispute can be settled by arbitrate or suit, so after figuring out the situation exactly, it is necessary to select more advantageous way in order to settle the dispute. Moreover, in case of the dispute between labor union, they have to keep in mind that conciliation procedures cannot be used.

• 대한치과기공학회지
• /
• 제12권1호
• /
• pp.73-93
• /
• 1990

The study objected to the 120 persons out of 360 persons who have registered under the association of the dental technicians in Pusan to grasp contents about improvement of life long education of the present day of November, 1987, and its results, which we have acquired by this study were as follows : 1. A sense of satisfaction toward the system of life long education appeared as unsatisfaction and its unsatisfaction decreased from the rate of member's attendance or exam. marks, the contents of education, and place of education. 2. The problem of the exam. mark which derived by the presence by the substitute appeared which 46.7 percent(56 persons), lack of opportunity for the recompletion at branch association appeared which 19.2%(23 persons), given 4. exam. marks at the over all scientific contest was appeared 14.2 percent(17 persons), relation which legal treatment when ones didn't completed exam. mark was appeared 10.8 percent(13 persons) and lastly, appeared 8.3 percent (10 persons) with time of delivery of the exam mark card. 3. The frequency of the opening for the life long education which related with the rate of members attendance was fixed as nowadays two times per annually, but they perferred the opening per academic blanch once out of the firest half year and the latter half of the year and, they liked the openings at the first week or second week and preferred the holding on saturdays and sundays. 4. The subject of the life long education have appeared the opinion that the thesis was lop-sided toward the allocation of time schedule of lecture appeared the opinion of which they perferred the rate of an hour of cultural subject and two hours of major studies, and invitation for an instructor they preferred one dentist, one member, one dean for the cultural subject, and there are lots of opinions which they wished display of materials. 5. A sence of satisfaction about the place they perferred was decreased such as ; an auditorium concerned of the colleges was 46.7 Percent(56 Persons), hotels 26.7 Percent(32 Persons), an auditorium of the general hospital 20 percent(24 persons) 6. And lastly, there are lots of opinions who have required the necessities to constitute for the academic branch.

• Journal of Biosystems Engineering
• /
• 제34권2호
• /
• pp.95-105
• /
• 2009

A method was proposed which employed control of the drop location of fertilizer particles on a spinner disc to optimize the spread pattern uniformity. The system contained an optical sensor as a feedback mechanism, which measured discharge velocity and location, as well as particle diameters to predict a spread pattern of a single disc. Simulations showed that the feed gate adaptation algorithm produced high quality patterns for any given application rate in the dual disc spreader. The performance of the feed gate control method was assessed using data collected from a Sulky spinner disc spreader. The results showed that it was always possible to find a spread pattern with an acceptable CV lower than 15%, even though the spread pattern was obtained from a rudimentary flat disc with straight radial vanes. A mathematical optimization method was used to find the initial parameter settings for a specially designed experimental spreading arrangement, which included the feed gate control system, for a given flow rate and swath width. Several experiments were carried out to investigate the relationship between the gate opening and flow rate, disc speed and particle velocity, as well as disc speed and predicted landing location of fertilizer particles. All relationships found were highly linear ($r^2$ > 0.96), which showed that the time-of-flight sensor was well suited as a feedback sensor in the rate and uniformity controlled spreading system.