• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.51 no.7
• /
• pp.333-340
• /
• 2002

To secure a service continuity is one of the most important mission in the ower distribution system operation. In this paper the necessary and sufficient condition to guarantee 100% service restoration capability for any fault on the system is reported. An evaluation methodology of the restoration capability(or restorability) is developed based on the developed restoration conditions. Applications of the developed concept to the system operation in the normal and emergency states, that would enhance the supply reliability of the system are described. They include enhancement of restoration capability adapting to load change, identification of best open switch and supervised switch positions.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.16 no.4
• /
• pp.238-245
• /
• 2016

Inverters are considered the basic building blocks of industrial electrical drive systems that are widely used for various applications; however, the failure of electronic switches mainly affects the constancy of these inverters. For safe and reliable operation of an electrical drive system, faults in power electronic switches must be detected by an efficient system that is capable of identifying the type of faults. In this paper, an open switch fault identification technique for a three-phase inverter is presented. Single, double, and triple switching faults can be diagnosed using this method. The detection mechanism is based on stator current analysis. Discrete wavelet transform (DWT) using Daubechies is performed on the Clarke transformed (-) stator current and features are extracted from the wavelets. An artificial neural network is then used for the detection and identification of faults. To prove the feasibility of this method, a Simulink model of the DWT-based feature extraction scheme using a neural network for the proposed fault detection system in a three-phase inverter with an induction motor is briefly discussed with simulation results. The simulation results show that the designed system can detect faults quite efficiently, with the ability to differentiate between single and multiple switching faults.

• Proceedings of the KIPE Conference
• /
• 2017.07a
• /
• pp.413-414
• /
• 2017

영구자석 동기전동기 구동 인버터 시스템 내 스위치 고장은 다양한 조합으로 발생한다. 특히 스위치 개방고장의 경우 다른 전기 부품에 과전류를 유발하여 전체 시스템에 심각한 2차 손상을 초래한다. 본 논문에서는 개방고장 진단 알고리즘의 복잡성을 완화하기 위해 고장 그룹을 분류하여 고장 발생 시 false alarm의 영향을 받지 않고 간단하고 체계적인 방식으로 고장을 식별할 수 있는 기법을 제안한다. 스위치의 개방 고장으로 영구자석 동기전동기 구동 시스템 내 PWM 전압원 인버터의 신뢰성을 향상시키기 위해 3중 스위치 개방고장 진단 및 검출 기법을 제시한다. 제안된 기법은 기존의 개방고장 진단방법과 달리 정보처리를 위해 Moving Filter를 사용함으로써 연산부하를 증가시키지 않고 신속한 고장 검출이 가능하며 별도의 하드웨어 구성없이 구현이 가능하다. 제안된 기법의 안정성과 유효성이 시뮬레이션을 통해 입증된다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.6
• /
• pp.70-77
• /
• 2004

In many industrial applications, an unexpected fault of induction motor drive systems can cause serious troubles such as downtime of the overall system heavy loss, and etc. As one of methods to solve such problems, this paper investigates the fault diagnosis for open-switch damages in a voltage-fed PWM inverter for induction motor drive. For the feature extraction of a fault we transform the current signals to the d-q axis and calculate mean current vectors. And then, for diagnosis of different fault patterns, we propose a clustering based diagnosis algorithm The proposed diagnostic technique is a modified ANFIS(Adaptive Neuro-Fuzzy Inference System) which uses a clustering method on the premise of general ANFIS's. Therefore, it has a small calculation and good performance. Finally, we implement the method for the diagnosis module of the inverter with MATLAB and show its usefulness.

• Journal of Korea Multimedia Society
• /
• v.9 no.1
• /
• pp.89-100
• /
• 2006

The introduction of GSMP open interface to OBS network can materialize to separate the transport plane and the control plane in OBS network. This makes the implementation of OBS switches simple and provides various flexibility. However, the introduction of open interface will cause the connection setup delay because of the additional processing overhead of open interface protocol. Also, in GSMP based network, the location of network management functions are not defined explicitly and the research result about the OBS network management is almost nothing. This paper proposes a parallel connection setup mechanism using centralized connection control server to minimize connection setup delay in OBS network with GSMP open interface and defines managed objects to support connection, configuration, performance, and fault management for the management of OBS network with GSMP open interface. This paper also proposes a distributed network management model, in which the above managed objects are distributed in a controller and an OBS switch according to network management functions. We verify the possibility of OBS control and network management by implementing network management function using proposed parallel connection setup mechanism and distributed network management model.

• Proceedings of the KIPE Conference
• /
• 2011.11a
• /
• pp.18-19
• /
• 2011

본 논문에서는 3상 PWM 정류기의 스위치 개방 고장시 감지 및 허용 운전 방법에 대해 제안한다. 스위치의 개방 고장이 발생 하면, 한상의 전류가 반주기 동안 나타나지 않기 때문에 출력 직류전압의 리플로 나타나게 된다. 이경우 고장 감지 및 허용 운전을 하지 않으면, 전력 품질을 저하되며, 직류 링크 콘덴서의 수명이 감축되는 문제를 발생 시킨다. 제안된 기법은 추가적인 하드웨어 없이 간단한 모델 적응 제어 (Model Reference Adaptive System)을 이용하여, 고장된 스위치를 감지 하며, 고장난 스위치의 반대 스위치를 켜고 나머지 2상을 전류제어 하여 3상 전류를 평형상태로 만들어 출력 직류전압의 리플을 줄이는 허용운전을 제안한다. 본 논문은 6kW급 3상 PWM 정류기 시스템을 모의해석을 통해 제안된 기법의 타당성을 입증 하였다.

• Proceedings of the KIPE Conference
• /
• 2017.11a
• /
• pp.103-104
• /
• 2017

영구자석 전동기는 전력 밀도가 높고 효율이 좋은 특징으로 견인, 의료, 군사 분야 등 다양한 산업 분야에서 사용되고 있다. 이러한 분야에서 사용되는 전동기 구동 시스템은 높은 신뢰성이 요구되므로 인버터에서 발생하는 전력 반도체 스위치 고장을 빠르게 감지해야한다. 본 논문에서는 제어기 상전압 지령과 추정된 상전압 사이의 오차를 통해 전력 반도체 개방 고장을 감지하고 진단하는 방법을 제시하였다. 제안된 방법은 추가적인 측정 회로 없이 제어기 내부 값을 사용하여 개방 고장을 감지하고 개방된 스위치를 진단할 수 있다. 특히 부하 변동을 고려한 감지 방법을 제안하여 고장 감지의 신뢰성을 개선한다.

• Proceedings of the KIPE Conference
• /
• 2014.07a
• /
• pp.518-519
• /
• 2014

선형 유도 전동기 구동 인버터의 스위치 결함에 대한 신뢰성 향상을 위해, 실제 온라인 기반의 고장 및 고장점 검출에 대한 연구가 활발하다. 인버터에서 스위치 고장이 발생하면, 일반적으로 전압, 전류에 고조파가 발생되고 토크의 리플이 증가하게 된다. 또한, 인버터 스위치 고장의 경우 과전류가 발생하며 다른 전자 부품에 2차 피해를 일으킬 수 있다. 본 논문에서는 센서를 통해 얻은 전류의 정보를 이용하여 고장 및 고장 스위치를 검출하는 알고리즘을 제안한다. 한 개 또는 두 개의 스위치 고장을 4개의 faulty group으로 구별하여 고장 검출이 이루어지며 제안된 알고리즘을 입증하기 위해 Matlab-Simulink을 이용한 시뮬레이션 결과와 실험 결과가 제시된다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.16 no.7
• /
• pp.2257-2285
• /
• 2022

Cyber-physical systems (CPS) have been growing exponentially due to improved cloud-datacenter infrastructure-as-a-service (CDIaaS). Incremental expandability (scalability), Quality of Service (QoS) performance, and reliability are currently the automation focus on healthy Tier 4 CDIaaS. However, stable QoS is yet to be fully addressed in Cyber-physical data centers (CP-DCS). Also, balanced agility and flexibility for the application workloads need urgent attention. There is a need for a resilient and fault-tolerance scheme in terms of CPS routing service including Pod cluster reliability analytics that meets QoS requirements. Motivated by these concerns, our contributions are fourfold. First, a Distributed Non-Recursive Cloud Model (DNRCM) is proposed to support cyber-physical workloads for remote lab activities. Second, an efficient QoS stability model with Routh-Hurwitz criteria is established. Third, an evaluation of the CDIaaS DCN topology is validated for handling large-scale, traffic workloads. Network Function Virtualization (NFV) with Floodlight SDN controllers was adopted for the implementation of DNRCM with embedded rule-base in Open vSwitch engines. Fourth, QoS evaluation is carried out experimentally. Considering the non-recursive queuing delays with SDN isolation (logical), a lower queuing delay (19.65%) is observed. Without logical isolation, the average queuing delay is 80.34%. Without logical resource isolation, the fault tolerance yields 33.55%, while with logical isolation, it yields 66.44%. In terms of throughput, DNRCM, recursive BCube, and DCell offered 38.30%, 36.37%, and 25.53% respectively. Similarly, the DNRCM had an improved incremental scalability profile of 40.00%, while BCube and Recursive DCell had 33.33%, and 26.67% respectively. In terms of service availability, the DNRCM offered 52.10% compared with recursive BCube and DCell which yielded 34.72% and 13.18% respectively. The average delays obtained for DNRCM, recursive BCube, and DCell are 32.81%, 33.44%, and 33.75% respectively. Finally, workload utilization for DNRCM, recursive BCube, and DCell yielded 50.28%, 27.93%, and 21.79% respectively.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.1
• /
• pp.112-116
• /
• 2010

As one of the countermeasures to improve the recovery characteristics of the SFCL (superconducting fault current limiter), the method using the trigger of high-TC superconducting element (HTSC) when the quench in the HTSC element occurred was proposed. To confirm the suggested method, the control circuit to detect the quench occurrence of HTSC element in case of the fault occurrence was designed and the current limiting and recovery experiments of the SFCL using the designed control circuit were performed. Through the analysis for the experimental results, the points of both the open time and the closing time of a power switch comprising the control circuit could be adjusted by the resistance amplitude of a normal conducting current limiting resistor (CLR) and the recovery characteristics of the SFCL together with the current limiting operation could be confirmed to be improved by using the control circuit.