• International Journal of Naval Architecture and Ocean Engineering
• /
• 제4권3호
• /
• pp.281-290
• /
• 2012

Hydrodynamic analysis of a surface-piercing body with an open chamber was performed with incident regular waves and forced-heaving body motions. The floating body was simulated in the time domain using a 2D fully nonlinear numerical wave tank (NWT) technique based on potential theory. This paper focuses on the hydrodynamic behavior of the free surfaces inside the chamber for various input conditions, including a two-input system: both incident wave profiles and forced body velocities were implemented in order to calculate the maximum surface elevations for the respective inputs and evaluate their interactions. An appropriate equivalent linear or quadratic viscous damping coefficient, which was selected from experimental data, was employed on the free surface boundary inside the chamber to account for the viscous energy loss on the system. Then a comprehensive parametric study was performed to investigate the nonlinear behavior of the wave-body interaction.

• 한국산업보건학회지
• /
• 제16권3호
• /
• pp.290-301
• /
• 2006

A push pull hood system is frequently applied to control contaminants evaporated from an open surface tank. Efficiency of push pull hood system is affected by various parameters, such as, cross draft, vessel shapes, tank surface area, liquid temperature. A previous work assisted by flow visualization technique qualitatively showed that a strong cross draft blown from the pull hood to push slot could destroy a stable wall-jet on the surface of tank, resulting in the abrupt escape of smoke from the surface. In this study, the tracer gas method was applied to determine the effect of cross-draft on the capture efficiency qualitatively. A new concept of capture efficiency was introduced, that is, linear efficiency. This can be determined by measuring the mass of tracer gas in the duct of pull hood while the linear tracer source is in between push slot and pull hood. By traversing the linear tracer source from the push slot to the pull hood, it can be found where the contaminant is escaped from the tank. Total capture efficiency can be determined by averaging the linear efficiencies. Under the condition of cross-draft velocities of 0, 0.4, 0.75, 1.05 and 1.47m/s, total capture efficiencies were measured as 97.6, 95.4, 94.6, 92.7 and 70.5% respectively. The abrupt reduction of efficiency with cross-draft velocity of 1.47m/s was due to the destruction of tank surface wall-jet by the counter-current cross-draft. The same phenomenon was observed in the previous flow visualization study. As an alternative to overcome this abrupt efficiency drop, the 20% increase of hood flow rates was tested, resulting in 20% efficiency increase.

• 한국산학기술학회논문지
• /
• 제15권1호
• /
• pp.593-601
• /
• 2014

본 연구에서는 산(acid) 세척 개방조의 양 측면에 설치한 슬롯형 외부식 후드의 성능을 평가하였고, 산(acid) 증기의 포집능력을 향상시킬 수 있는 방안을 검토하였다. 현장조사와 전산유체역학 수행한 결과, 기존 후드의 흡인 성능이 매우 불량한 것으로 확인되었으며, 후드의 흡인 성능을 개선시켜야 할 것으로 판단되었다. 이러한 문제점을 해결하기 위해 개방조 한쪽에서 밀어주고 반대편에서 당겨주는 방식의 Push-pull 후드로 개선할 것을 제시하였다. 개선 방안에 대한 효과를 예측한 결과, Push-pull 후드로 개선할 경우에는 push 기류에 의해 조 표면에 비교적 높은 제어 기류를 형성시키면서 산 가스를 후드 쪽으로 유인시킬 수 있는 것으로 예측되었다. 그러나 push 기류 유속이 너무 강할 경우에는 후드 쪽에서 오히려 범람하여 주변으로 확산될 가능성이 있는 것으로 확인되었다. 따라서 push 급기를 약 25 $m^3/min$(급기유속 10 m/s) 수준으로 설치할 경우 조 표면으로 적절한 제어 기류가 형성되는 것으로 확인되었다. 또한, 조 상부에 정체하던 산 가스가 후드 쪽으로 원활하게 유인 및 포집되어 흡인 성능이 향상될 수 있음을 확인할 수 있었다.

• 한국산업보건학회지
• /
• 제15권1호
• /
• pp.36-44
• /
• 2005

A push pull hood system is frequently applied to control contaminants evaporated from an open surface tank in recent years. Efficiency of push pull hood system is affected by various parameters, such as cross draft, vessel shapes, size of tanks surface, liquid temperature, and so on. Among these, velocity of cross draft might be one of the most influencing factor for determining the ventilation efficiency. To take account of the effect of cross draft velocities over 0.38m/s, a flow adjustment of ${\pm}$20% should be considered into the push and +20% into the pull flow system Although there are many studies about the efficiency evaluation of push pull hood system based on CFDs(Computational Fluid Dynamics) and experiments, there have been no reports regarding the influence of velocities and direction of cross-draft on push-pull hood efficiency. This study was conducted to investigate the influence of cross draft direction and velocities on the capture efficiency of the push-pull ventilation system. Smoke visualization method was used along with mock-up of push-pull hood systems to verify the ventilation efficiency by experiments. When the cross-draft blew from the same origins of the push flows, the efficiency of the system was in it's high value, but it was decreased significantly when the cross-draft came from the opposite side of push flows Moreover, the efficiency of the system dramatically decreased when the cross-draft of open surface tank was faster than 0.4m/s.

• 한국환경과학회지
• /
• 제5권6호
• /
• pp.683-697
• /
• 1996

Industrial ventilation is a crucial engineering measure to protect workers from hazardous airborne contaminants. Designing a ventilation system is not an easy task. To solve this problem, many U. S. computer programs and softwares have been developed. In Korea, asoftware, called as VPMC, was developed by Korea Industrial Safety Corporation. But VPMC could not stand alone since it can be used to design not a hood, but a ventilation system. In this research, therefore, a preprocessing software was developed. It can be used to design general ventilation system, canopy hood, open surface tank hood. The program was written in Microsoft Visual Basic. In near future, this software will be incorporated into a total package software which can be used to design a whole ventilation system.

• Journal of Advanced Research in Ocean Engineering
• /
• 제1권1호
• /
• pp.14-24
• /
• 2015

A three-dimensional multidirectional nonlinear numerical wave tank (NWT) based on the Navier-Stokes equations and the Finite Volume Method (FVM) is developed by using the two-phase hydrodynamic flow solver naoe-FOAM-SJTU based on the open source toolbox OpenFOAM. The free surface is capturing with the Volume Of Fluids (VOF). The directional wave including Stokes wave, solitary wave and nonlinear wave are simulated and verified. The multi-directional waves are also simulated with particular wave spectral such as JONSWAP and wave directional spreading function. The obtained numerical results show the capability of the solver to generate different type of multidirectional nonlinear waves accurately. Meanwhile, it implies that the presented NWT can easily extend to model the wave-structures interactions, which will be great help to the offshore structures design.

• International Journal of Ocean System Engineering
• /
• 제4권1호
• /
• pp.49-56
• /
• 2014

A three-dimensional multidirectional nonlinear numerical wave tank (NWT) based on the Navier-Stokes equations and the Finite Volume Method (FVM) is developed by using the two-phase hydrodynamic flow solver naoe-FOAM-SJTU based on the open source toolbox OpenFOAM. The free surface is capturing with the Volume Of Fluids (VOF). The directional wave including Stokes wave, solitary wave and nonlinear wave are simulated and verified. The multi-directional waves are also simulated with particular wave spectral such as JONSWAP and wave directional spreading function. The obtained numerical results show the capability of the solver to generate different type of multidirectional nonlinear waves accurately. Meanwhile, it implies that the presented NWT can easily extend to model the wave-structures interactions, which will be great help to the offshore structures design.

• 해양환경안전학회지
• /
• 제20권6호
• /
• pp.746-751
• /
• 2014

본 논문에서는 소스 코드가 공개된 라이브러리를 이용하여 선박의 성능을 예측할 수 있는 해석 코드를 개발하였다. 질량보존 방정식, 모멘튼 보존방정식, 난류를 고려하기 위해 난류모델과 벽함수를 고려하였다. 자유수면 계산을 위해 볼륨비 수송방정식을 고려하였고, 자유수면의 정확도 높은 계산을 위해 고차 도식을 포함하는 라이브러리를 개발하였다. 개발한 프로그램을 컨테이너선인 KCS에 적용한 결과 실험에서 포착된 자유수면 분포를 잘 예측하였다. 자항성능 평가 시 추진기 회전을 위해 GGI 라이브러리를 사용하였다. 계산결과 실험과 비교해 약 7 % 정도의 정확도로 자항성능을 예측하였다. 캐비테이션 예측을 위해 이상 균질 모델을 포함하는 새로운 라이브러리를 개발하였다. 이상 균질 모델을 추진기에 적용한 결과 일반적으로 발생하는 얇은 층 캐비테이션을 잘 예측하는 것을 확인하였다. 오픈 소스 라이브러리를 이용하여 개발한 수치수조를 KCS에 적용한 결과 오픈 소스 라이브러리에 대한 가능성을 확인하였다.

• 대한조선학회논문집
• /
• 제43권4호
• /
• pp.440-450
• /
• 2006

In this paper, we suggest a design concept of defining the propeller geometry by stacking up the blade sections aligned with propeller surface streamlines. Numerical and experimental propeller open water(P.O.W.) characteristics of a newly designed propeller are presented. The surface streamlines for a propeller are obtained by using the panel method. Redefinition of the blade sections aligned with the streamlines is provided together with 8-spline modeling, by which we manufacture model propellers. We carried out the P.O.W, tests in a towing tank in order to show the effect of the present method on P.O.W. characteristics.

• 한국해양공학회지
• /
• 제26권3호
• /
• pp.33-38
• /
• 2012

The aim of this experimental study was to analyze the effect of the shape parameters and chamber pressure of a land-based oscillating water column (OWC) in regular incident waves. The magnitude of the free surface elevations inside the chamber was measured in a two-dimensional wave tank for various chamber skirt drafts and bottom slope angles. The surface elevations were also measured under both open chamber and partially open chamber conditions. From these measurements, the optimum shape of the OWC device could be predicted for the maximum wave energy conversion efficiency. It was found that the resonance frequency of the OWC system associated with incident waves moved toward the long wave region with increments of the draft of the chamber skirt and bottom slope. The behavior of the free surface elevation inside the chamber was also found to be dependent on the chamber pressure.