• Selected Papers of The Society of Naval Architects of Korea
• /
• v.1 no.1
• /
• pp.76-90
• /
• 1993

A new propeller series is developed using the newly developed blade section (KH 18 section) which has better cavitation characteristics and higher lift-drag ratio at wade angle-of-attack range than a conventional section. The radial patch distribution of the new series propellers is variable stance they were designed adaptively to a typical wake distribution. Basic geometric particulars of the series propellers. such as chord length, thickness, skew and rake distributions, are determined on the basis of recent full scale propeller geometric data. The series is developed for propellers having 4 blades, and blade area ratios of 0.3, 0.45, 0.6 and 0.75. Mean pitch ratios are varied as 0.5, 0.6, 0.7, 0.95 and 1.1 for each blade area ratio. The new propeller series consists of 20 propellers and is named as the KD(KRISO-DAEWOO)-propeller series. Propeller open-water tests are performed at the towing tank, and cavitation observation tests and fluctuating pressure tests are carried out at the cavitation tunnel of KRISO. $B_{p}-\delta$ curves, which can be used to select the optimum propeller diameter at the preliminary design stage, are derived from a regression analysis of the propeller open-water test results. The KD-cavitation chart is derived from the cavitation observation test results by choosing the local maximum lift coefficient and the local cavitation number as parameters. The cavity extent predicted by the KD-cavitation chart would be more accurate compared to that by an existing cavitation charts, such as the Burrll's cavitation chart, since the former is derived from the cavitation observation test results in a typical ship's wake, while the lather is derived from the test results in a uniform flow.

• International Area Studies Review
• /
• v.13 no.1
• /
• pp.39-51
• /
• 2009

The misery index is the sum of the inflation rate and the unemployment rate. The higher the index, the lower the performance of the national economy. Lee and Cheong (2007) propose that the open misery index, defined to be the sum of the misery index and the ratio of current account to GDP, properly measure the economic performance of a national economy when its degree of openness is large. This paper shows that the periods of rising open misery index of the USA coincide with those of economic hardship in the USA. Most recently, the open misery index of the USA has shown a rising trend for a decade prior to the current economic crisis. That is, external and internal imbalances of the USA have accumulated for a decade prior to the current economic crisis. We interpret the recent rising trend of the open misery index of the USA as a precursor of the current economic crisis.

• Journal of the Korean association of regional geographers
• /
• v.18 no.1
• /
• pp.118-127
• /
• 2012

Using GIS, animal clinic's spatial distribution characteristics were analyzed. Animal clinic location data was collected through the Internet's Open API service. Approximately 4,100 animal clinics are operated in South Korea in 2011. And 47 % of these are located in the Seoul area. Population, especially female population and apartment resident's ratio affects the location factor of the animal clinic. The number of 25~44 year-old woman and animal clinics are high correlation. In the animal clinic location, distance from the road is more important than the distance of the metro.

• Progress in Superconductivity and Cryogenics
• /
• v.14 no.4
• /
• pp.12-15
• /
• 2012

$MgB_2$ superconductor is highly sensitive to the Mg content. Even if the samples are synthesized with the appropriate looking stoichiometric ratio, the heat treatment leads to the loss of Mg either to ambiance or to MgO. To avoid it, either excess Mg is added in the starting powder or sealed ampoule annealing is employed. In this paper the effect of open Mg sintering ambiance on the ex-situ $MgB_2$ was studied to enhance its superconducting properties. The open Mg ambiance was created to avoid any overpressure of Mg by providing a hole in Fe tube used as sample holder. The decrease in resistivity of the synthesized sample was observed through the increased temperature dependence of electron-phonon interactions. A clear enhancement in the superconducting cross-sectional area and hence the in-field critical current density is obtained.

• Journal of Korean Society of Forest Science
• /
• v.89 no.3
• /
• pp.452-460
• /
• 2000

This study was to investigate the growth characteristics, physiological adaptation of Pinus densiflora(Japanese Red Pine) seedlings at the artificial canopy gap in the Quercus acutissima plantation and to analyze its natural regeneration mechanism. Photosynthetic and transpiration rates were analyzed by different levels of photosynthetically active radiation and by seedling growth. Comparing to seedlings at the open area, those at the canopy gap showed more growth in height than in diameter with different levels of light quality and low light intensity, and the increase rate of dry weight was higher in the aboveground than in the underground, maintaining relatively high T/R rate. The C/F(the ratio of non-photosynthetic organs to photosynthetic organs in dry weight) of the aboveground at the canopy gap was higher than that at the open area by 0.1~0.2, while light saturation and light compensation points at the canopy gap were lower than that at the open area by $300{\mu}mol\;m^{-2}s^{-1}$ and 40%, respectively. The seedlings appeared to have shade tolerance to a certain extent at the young growth stage despite Pinus densiflora is typically classified shade-intolerant species. With light intensity lower than $400{\sim}450{\mu}mol\;m^{-2}s^{-1}$, photosynthetic rate and water use efficiency relatively increased by effective use of light energy.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.25 no.2
• /
• pp.197-205
• /
• 2001

It is possible to examine the costume of Chosun era that tombs excavated in chonnam area, have contained various kinds of clothes. There are six tombs in which costumes have been excavated in Chonnam provinces. One(Go un) is tomb of the early years of Chosun Dynasty and the other tombs is those of the middle years of Chosun Dynasty(16∼17 century). There were many kinds of Po which was called Jickryung, Danryung, Chullik, Dappo, Jangui, So-changui etc, and contained chechori, skirts, under-trousers in tombs. But there are not see Kuui, Dopo that excavated in other area. Chullik showed the features of winkle, sleeves and the ratio of length. Dappo was only to be seen in a Go uns grave. Mens chechori collar(kit) was called Mokpankit in all, and womans chechori collar was called Kalkit or Tangkokit. The length of chechori was different according to the times. Most trousers are types of underwear and also there are Sapok tousers, open trousers. The characterstics of excavated costumes are not regional feature but trend of the times. The costumes excavated in Chonnam area are similiar to those excavated in other area at the same times.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.1
• /
• pp.103-110
• /
• 2014

Sisal fiber, an agricultural resource abundantly available in china, has been used as raw material to prepare activated carbon with high surface area and huge pore volume by chemical activation with zinc chloride. The orthogonal test was designed to investigate the influence of zinc chloride concentration, impregnation ratio, activation temperature and activation time on preparation of activated carbon. Scanning electron micrograph, Thermo-gravimetric, $N_2$-adsorption isotherm, mathematical models such as t-plot, H-K equation, D-R equation and BJH methods were used to characterize the properties of the prepared carbons and the activation mechanism was discussed. The results showed that $ZnCl_2$ changed the pyrolysis process of sisal fiber. Characteristics of activated carbon are: BET surface area was $1628m^2/g$, total pore volume was $1.316m^3/g$ and ratio of mesopore volume to total pore volume up to 94.3%. These results suggest that sisal fiber is an attractive source to prepare mesoporous high-capacity activated carbon by chemical activation with zinc chloride.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1996.04a
• /
• pp.333-336
• /
• 1996

This paper is an exploratory study aimed at finding factors that influence the penetration of cellular mobile telecommunications which have seen rapid development since 1980s. The paper tries to find economy and policy variables to influence the penetration by means of the multiple regression analysis. This paper shows a model that explain the penetration ratio of cellular service. The model is based on data from 39 upper middle income and 39 high income countries. The result shows that GDP per capita and the service period of the cellular mobile telecommunication have influenced on the penetration ratio positively, and the tariff of the service negatively. But, it is the open area to study the impact of the telecommunications policy changes on penetration, and to set a model which could explain the nation-specific characteristics.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1434-1437
• /
• 2003

Sometimes open holes are required for the function and the weight reduction of structure and machinery. However, the serious stress concentration occurs because of the geometric discontinuity caused by the holes and cutting section. In this study, it is attempted to obtain the stress concentration coefficients of the inner surface of the hole boundary by changing the position and the shape of holes on the homogeneous isotropic plate. And the effects on the plate are investigated. The results show that the stress level becomes low and the distribution area widens the position of stress concentration changes as the ratio a/b increases and change to a circle. And as the ratio a/l decreases, the stress concentration reduces. As the plate with three holes. the stress $\sigma$$\_$x/ and $\tau$$\_$xy/ of hole 1,3 becomes high, especially $\sigma$$\_$x/ dominant and high.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.833-836
• /
• 2002

Sometimes open holes are required for the function and the weight reduction of structure and machinery. However, the serious stress concentration occurs because of the geometric discontinuity caused by the holes and cutting section. In this study, it is attempted to obtain the stress concentration coefficients of the inner surface of the hole boundary by changing the position and the shape of holes on the homogeneous isotropic plate. And the effects on the plate are investigated. The results show that the stress level becomes low and the distribution area widens the position of stress concentration changes as the ratio ah increases and change to a circle. And as the ratio a/l decreases, the stress concentration reduces.