• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제3권2호
• /
• pp.157-160
• /
• 2003

In this paper, we describe how to represent lower case hand-written English alphabets by a sequence of two to seven fuzzy sets. Each fuzzy set represents an arc segment of the character and each arc segment is assumed to be a part of an ellipse. The part of an ellipse is defined by five quantities; its short and long radii, its orientation angle, whether it is a part of the lower half or the upper half, and whether it is the full half or a part of a half. Hence, we use the Cartesian product of five fuzzy sets to represent each arc segment. We show that this representation is a translation, rotation, and scaling invariant and that it can be used to generate the hand-written English alphabets. The representation we describe is different from the one proposed earlier by the author and when compared with the previous representation, the one described in this paper simulates more closely the behavior of how one writes English characters.

• 한국실내디자인학회논문집
• /
• 제15권4호
• /
• pp.156-164
• /
• 2006

One of frequent phenomena in the contemporary cultural field is the alternative or accompanying interweaving phenomena which happens in the relative connection of A, B, and C. The power of interweaving mixture is one of energies which unify the contemporary cultural phenomena, and it appears as a major phenomena in the recent popular digital architecture. In this study, the mixture, shape, and contents in the contemporary space design is analyzed as a point of view of Post-Structuralism. Namely, the digital part and non-digital part of alternative and circulating existence in the space are classified and the interweaving phenomena in the contemporary space design are proved. It is studied for digital part and physical space to conjunct the hole space and smooth space of Deleuze as part of interweaving phenomena. It is clear that the compatible concept of the hole space and smooth space is crossed complexly or is coexisting in circulating and extending, and is showed as interweaving phenomena in one space.

• Clinics in Shoulder and Elbow
• /
• 제2권1호
• /
• pp.21-27
• /
• 1999

Purpose : The purpose of this study was to evaluate the functional outcomes of one-part fracture of the greater tuberosity that had been treated either by a conservative treatment or an operative approach. Materials and Method: Eighteen shoulders in 18 patients who had an one-part fracture of the greater tuberosity of the proximal humerus were managed, and the average follow-up period was 4 years and 10 months (range, 1 year to 8 years 6 months). Results: According to Neer's criteria for evaluation of results, in the group of 13 patients managed nonoperatively, the results were good or excellent in ten patients, fair in one, and poor in two. In the group managed operatively, the results were excellent in all five patients. Conclusion: If the displacement of the fragment is more than 5mm in young active patients, and more than 3mm especially in athletes and heavy laborers involved in overhead activity, the fragment should be mobilized, repaired and fixed into its original bed or a little bit inferolaterally with multiple heavy non-absorbable sutures, tension band technique, or cancellous screws and washers. We would suggest that the patients showing one-part fracture of the greater tuberosity of the proximal humerus should be evaluated individually.

• 대한기계학회논문집B
• /
• 제23권8호
• /
• pp.1022-1030
• /
• 1999

A numerical study was carried out to analyze the effect of flow distribution of stirred part and plug flow part on combustion efficiency at the coal gasification process in an entrained bed coal reactor. The model of computation was based on gas phase eulerian balance equations of mass and momentum. The solid phase was described by lagrangian equations of motion. The $k-{\varepsilon}$ model was used to calculate the turbulence flow and eddy dissipation model was used to describe the gas phase reaction rate. The radiation was solved using a Monte-Carlo method. One-step parallel two reaction model was employed for the devolatilization process of a high volatile bituminous Kideco coal. The computations agreed well with the experiments, but the flame front was closer to the burner than the measured one. The flow distribution of a stirred part and a plug flow part in a reactor was a function of the magnitude of recirculation zone resulted from the swirl. The combustion efficiency was enhanced with decreasing stirred part and the maximum value was found around S=1.2, having the minimum stirred part. The combustion efficiency resulted from not only the flow distribution but also the particle residence time through the hot reaction zone of the stirred part, in particular for the weak swirl without IRZ(internal recirculation zone) and the long lifted flame.

• 한국정밀공학회지
• /
• 제19권7호
• /
• pp.36-42
• /
• 2002

This paper presents two actuators for levitation using repulsions of permanent magnet and two magnetic levitation tables using the actuators. Here, one actuator for levitation consists of one fixed magnet and one moving magnet, and the other actuator consists of two fixed magnets and one moving magnet. The moving part of the magnetic levitation table contains the moving magnets. repulsive forces caused by the permanent magnets are linearized, and then the equation of motion of the moving part of the table is derived. Using the equation of motion, stability conditions of the moving part are deduced. The stability conditions are analyzed for positional relations of the moving magnets and the minimum number of active control required for stable system. As a result, in the each case of magnetic levitation tables, the requirements for stabilization are expressed by the positional relations and the number of the active controls.

• 한국경영과학회지
• /
• 제29권4호
• /
• pp.175-187
• /
• 2004

We consider the simultaneous selection of part routes for multiple part types in Flexible Manufacturing Systems (FMSs). Using an optimization framework we investigate two alternative route assignment policies. The one, called routing mix policy in the literature, specifies the optimal proportion of each part type to be produced along its alternative routes, assuming that the proportions can be kept during execution. The other one, which we propose and call pallet allocation policy, partitions the pallets assigned to each part type among the routes. The optimization framework used is a nonlinear programming superimposed on a closed queueing network model of an FMS which produces multiple part types with distinct repeated visits to certain workstations. The objective is to maximize the weighted throughput. Our study shows that the simultaneous use of multiple routes leads to reduced bottleneck utilization, improved workload balance, and a significant increase in the FMS's weighted throughput, without any additional capital investments. Based on numerical work, we also conjecture that pallet allocation policy is more robust than routing mix policy, operationally easier to implement, and may yield higher revenues.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.1255-1258
• /
• 2006

PM OLED has the line-disturbance when eyes can detect the driving line status in the shaking situation. It is closely related with the lighting intensity and the lighting time during the line driving. .In this paper we suggest the frame part method for eliminating lineflash appearance. Frame part is a driving method of PM OLED, which divides one frame into several inner-frame parts to reduce the color interference between closely related pixels and to lessen the lineflash appearance which disturbs viewer to perceive the images. Frame part groups one frame into several inner-frame parts and have inner-frame rate higher than the frame rate. Frame part could be used in most of applications in PM OLED systems to enhance the total performance of screen quality.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2006년도 제5회 박판성형 SYMPOSIUM
• /
• pp.49-54
• /
• 2006

During most of manufacturing processes of auto-body panels, the trimming line should be designed in advance prior to flanging. It is an important task to find a feasible trimming line to obtain a precise final part shape after flanging. This paper proposes a new fast method to find feasible trimming line based on one-step analysis. The basic idea of the one-step analysis is to seek for the nodal positions in the initial blank from the final part, and then the distribution of strain, stress and thickness in the final configuration can be calculated by comparing the nodal position in the initial blank sheet with the one of the final part. The one-step analysis method is able to predict the trimming line before flanging since the desired product shape after flanging can be defined from the final configuration and most of strain paths are simple during the flanging process. Finally, designers can obtain a discrete trimming line from the boundary of the developed meshes after one-step analysis and import it into CAD system in the early design stage. The proposed method has been successfully applied to two basic curve flanging processes demonstrating many advantages.

• 대한기계학회논문집A
• /
• 제37권2호
• /
• pp.193-198
• /
• 2013

제품은 하나 이상의 부품으로 구성되어 있으며, 제품을 구성하는 부품들은 같은 기능을 갖는 경우도 있다. 부품통합설계 가설에 의하면 같은 기능을 하는 부품은 하나의 부품으로 통합될 수 있다. 제품을 구성하는 부품은 하나 이상의 기능을 가지고 있는 경우가 있으며, 부품의 형상 자체가 기능이 되거나 부품의 재질이 갖는 특성이 기능이 되기도 한다. 본 논문에서는 부품이 가지고 있는 기능을 정의하는 방법을 제시하고, 제시된 방법에 의하여 확인된 부품의 기능들 중에서 동일 기능을 갖는 부품을 통합하는 방법을 제시하였다. 또한 제시된 방법을 이용하여 종이에 구멍을 뚫는 3 공 천공기를 구성하는 부품들을 통합해 보았으며 그 결과는 공리적 설계를 만족하였다.

• 대한산업공학회지
• /
• 제20권3호
• /
• pp.151-166
• /
• 1994

The manufacturing environment on which this research is focused is an FMS in which AGVs are used for material handling and each part type has one or more process plans. The research aims at developing a methodology whereby, given a part and volume mix for production during any production session, the best set of process plans including one plan per part type is selected and the best unidirectional AGV guidepath can be dynamically reconfigured in response to changes in parts and lot sizes combination. For the integrated PPS/FGD problem in which two functions of process plan selection (PPS) and flexible AGV guidepath design (FGD) are integrated, a zero-one integer programming model is developed. The integrated problem is decomposed into two subproblems, process plan selection given a directed AGV layout and AGV guidepath design with a fixed process plan per part type. A heuristic algorithm that alternately and iteratively solves these two subproblems is developed. The effectiveness of the heuristic algorithm is tested by solving various randomly generated sample problems and comparing the heuristic solutions with those obtained by an exact procedure. From the test results, the following conclusions are drawn: 1) For a reasonable size problem, the heuristic is very effective. 2) By integrating the two functions of PPS and FGD, a remarkable benefit in total production time for a given part and volume mix is gained.