• Korean Journal of Veterinary Service
• /
• v.34 no.1
• /
• pp.13-18
• /
• 2011

The purpose of this study was to apply a nested-polymerase chain reaction (nPCR) assay to detect and differentiate PCV 2a and PCV 2b. The compared with nPCR and one-step PCR and nPCR showed more sensitive in the detection of PCV-2 from tissue and blood samples. The total of 52 tissue samples was collected from postweanning pigs from 2006 to 2010. All tissue samples showed positive for PCV-2 in one-step PCR and nPCR, followed by the nPCR in order to identify the genotypes of PCV-2. 2 samples (3.8%) showed positive for PCV 2a, and 35 samples were positive for PCV 2b (67.3%), 15 samples (28.9%) were positive the dual genotypes. In addition, 42 blood samples which were collected from the 5 different swine farms were compared figure out the detection rates of nPCR and one-step PCR. The PCV 2 was positive by one-step PCR in 21 samples (50.0%) and nPCR was positive in 37 samples (88.1%). The PCV 2 genotypes in blood samples and 32 samples (76.2%) were positive for PCV 2b and none were positive for PCV 2a, 5 samples (11.9%) were positive for dual genotypes. These results suggest that the nPCR is very efficient for genotyping blood samples and differentiating the genotypes of PCV-2 from field samples.

• Journal of Microbiology and Biotechnology
• /
• v.26 no.8
• /
• pp.1398-1403
• /
• 2016

The simultaneous detection and accurate identification of hepatitis A virus (HAV) is critical in food safety and epidemiological studies to prevent the spread of HAV outbreaks. Towards this goal, a one-step duplex reverse-transcription (RT)-PCR method was developed targeting the VP1/P2B and VP3/VP1 regions of the HAV genome for the qualitative detection of HAV. An HAV RT-qPCR standard curve was produced for the quantification of HAV RNA. The detection limit of the duplex RT-PCR method was 2.8 × 10¹ copies of HAV. The PCR products enabled HAV genotyping analysis through DNA sequencing, which can be applied for epidemiological investigations. The ability of this duplex RT-PCR method to detect HAV was evaluated with HAV-spiked samples of fresh lettuce, frozen strawberries, and oysters. The limit of detection of the one-step duplex RT-PCR for each food model was 9.4 × 10² copies/20 g fresh lettuce, 9.7 × 10³ copies/20 g frozen strawberries, and 4.1 × 10³ copies/1.5 g oysters. Use of a one-step duplex RT-PCR method has advantages such as shorter time, decreased cost, and decreased labor owing to the single amplification reaction instead of four amplifications necessary for nested RT-PCR.

• Textile Coloration and Finishing
• /
• v.19 no.3
• /
• pp.18-25
• /
• 2007

The fixing behaviors of anthraquinone disperse dyes containing dimethylamino substituent, such as C. I. Disperse Violet 26(D.V.26) and C. I. Disperse Blue 14(D.V.14), or containing diamino substituent, such as C. I. Disperse Blue 73(D.B.73), and monochlorotriazinyl azo reactive dyes, such as C. I. Reactive Orange 13(R.O.13), C. I. Reactive Red 3(R.R.3). C. I. Reactive Yellow 2(R.Y.2) on polyester/cotton blend(P/C) fabrics were examined for the one-step printing of P/C fabrics. The high temperature steaming of $175^{\circ}C$ is the most satisfactory fixing method for P/C one-step printing with above disperse and reactive dyes among the four different fixing methods: $175^{\circ}C$ steaming, $102^{\circ}C$ steaming${\rightarrow}175^{\circ}C$ steaming, $190^{\circ}C$ thermosol, $102^{\circ}C$ steaming${\rightarrow}190^{\circ}C$ thermosol. $190^{\circ}C$ thermosol is unfit to fix R.R.3 and R.Y.2 whose heat stability is poor. It was found that D.V.26 and D.B.14 containing dimethylamino substituent are unstable for heat and alkali, but D.B.73 is stable for them to print P/C blend fabrics with R.O.13 which is also stable for heat. Therefore we found that D.B.73, R.O.13 and a pair of D.B.73 and R.O.13 were very suitable for one-step printing of P/C blend fabrics.

• Restorative Dentistry and Endodontics
• /
• v.40 no.1
• /
• pp.68-74
• /
• 2015

Objectives: This study examined the effects of additional acid etching on the dentin bond strength of one-step self-etch adhesives with different compositions and pH. The effect of ethanol wetting on etched dentin bond strength of self-etch adhesives was also evaluated. Materials and Methods: Forty-two human permanent molars were classified into 21 groups according to the adhesive types (Clearfil SE Bond [SE, control]; G-aenial Bond [GB]; Xeno V [XV]; Beauti Bond [BB]; Adper Easy Bond [AE]; Single Bond Universal [SU]; All Bond Universal [AU]), and the dentin conditioning methods. Composite resins were placed on the dentin surfaces, and the teeth were sectioned. The microtensile bond strength was measured, and the failure mode of the fractured specimens was examined. The data were analyzed statistically using two-way ANOVA and Duncan's post hoc test. Results: In GB, XV and SE ($pH{\leq}2$), the bond strength was decreased significantly when the dentin was etched (p < 0.05). In BB, AE and SU (pH 2.4 - 2.7), additional etching did not affect the bond strength (p > 0.05). In AU (pH = 3.2), additional etching increased the bond strength significantly (p < 0.05). When adhesives were applied to the acid etched dentin with ethanol-wet bonding, the bond strength was significantly higher than that of the no ethanol-wet bonding groups, and the incidence of cohesive failure was increased. Conclusions: The effect of additional acid etching on the dentin bond strength was influenced by the pH of one-step self-etch adhesives. Ethanol wetting on etched dentin could create a stronger bonding performance of one-step self-etch adhesives for acid etched dentin.

• Kyungpook Mathematical Journal
• /
• v.46 no.2
• /
• pp.211-217
• /
• 2006

In this paper, we have shown that the convergence of one-step, two-step and three-step iterations is equivalent, which are known as Mann, Ishikawa and Noor iteration procedures, for a special class of Lipschitzian operators defined in a closed, convex subset of an arbitrary Banach space.

• The Journal of Korean Academy of Prosthodontics
• /
• v.29 no.3
• /
• pp.87-99
• /
• 1991

The effect of oven firing on the color stability and surface texture of extrinsic stains used characterization and color modification of metal cermic restoration were studied by comparing different temperatures and techniques. They were autoglaze technique, applied glaze technique, two step low-fusing glaze technique and one step low-fusing glaze technique. Autoglaze technique and applied glaze technique were air-fired to manufacturer's recommended temperature. Two step low-fusing glaze technique is separated staining and overglazing. Thin slurry of stain powder were air-fired to $1500^{\circ}F$, Overglaze powder powder was then mixed with seam medium and air-fired to $170^{\circ}F$. One step low-fusing glaze technique is combined staining and overglazing. Thin slurry of stain and glaze powder were air-fired to $170^{\circ}F$. The obtained results were as fellows. 1. Slightly significant color differences by colorimeter were found between different stain application and fusion techniques(P<0.05). 2. Two step low-fusing glaze method showed the most rough surface, especially ceramco orage stain(P<0.05). 3. Surface roughness increased gradually in order of autoglaze, applied glaze, one step low-fusing glaze but they were not significantly different(P<0.05). 4. When two step low-fusing glaze was applied, both color measurement and surface texture were sinificantly different from other groups(P<0.05).

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.34D no.9
• /
• pp.56-63
• /
• 1997

There generally exists a large variation in the thereshold voltages of the flash EEPROM cells after they are erased by using th fowler-nordheim tunneling, thereby getting some cells to be overeased. If the overerased cells are programmed with the conventional one-step programming scheme where an 12-13V pulse with the duration of 100.mu.S is applie don the control gate for the programming, they can suffer from the significant degradation of the reliability of the gate oxide. A two-step programming schem, where an 8/12 V pulse with a duration of 50.mu.S for each voltage is applied on the control gate for the programming, has been studied to solve the problem. The experimental results hav eshown that there is little difference in the programming characteristics between those two schemes, whereas the degradation of the gate oxide due to the programming can be significantly reduced with the two-step programming scheme compared to that with the one-step programming scheme. This is possibly because the positive charge stored in the floating gate of the overerased cells is compensate dwith the electrons injected into the floating gate while the 8V pulse is applied on the control gate, which leaves the overerased cells in the normally erased state after the duration of the 8V pulse.

• The Research Journal of the Costume Culture
• /
• v.13 no.5 s.58
• /
• pp.699-711
• /
• 2005

This study was following one of 'A study on the consciousness of fashion industries internship'. The purposes of this study were to develop the internship program which focused on practical use to introduce and carry out for fashion industries, and secondly to propose some regime for government to activate fashion internship. Reference searching method and depth interviewing method were used for this study. The results were as follows : Fashion industry internship was grouped into two classes, 'on-the-job training'; educating students fields and 'talent hunting'; selecting good persons. Internship of industry-academic world was classified into two types; the one is 'credit type' which has curriculums between universities and industries and the other is 'non-credit type' which has not any credit and is operated by industry own system. This study provided the development courses of pragmatic program to perform internship systematically and it also provided the program models for guide line in fashion industries. Six grades such as ready step, introduction step, selection step, management step, evaluation step and feed-back step were proposed for the internship program development steps of fashion industries. A virtual organization, 'The Fashion Industry and Academy Association' was proposed as a policy for activating internship between universities, industries and government.

• Journal of Korean Society for Atmospheric Environment
• /
• v.9 no.4
• /
• pp.271-277
• /
• 1993

Indoor radon has been known as one of the notorious carcinogens. However, a safe environmental criterion of radon has not yet been established in Korea, The main objectives of this study were to study concentration distributions of radon, to trace radon sources in subways, and to obtain a strategy for radon reduction in Seoul metropolitan area. Radon concentrations had been extensively determined by several steps. The first step was to survey radon levels in all of 83 subway stations from October to November in 1991. The second step was to select 40 out of 83 stations and then to study seasonal variations in 1991 and 1992. The third step was to monitor radon levels by hourly-basis plans. The fourth step was to seek a radon reduction strategy by altering ventilation at Ankuk station where had the highest radon concentration during the first measurement step. Each underground floor in the station was divided into 10 sites to measure hourly radon variations. The final step of the study was to measure radon concentrations in groundwater that is one of the possible main sources radon place. The result of the various measuring approaches showed short-and long-term radon variation and indicated radon reduction schemes.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.4 no.4
• /
• pp.190-200
• /
• 1996

Step-by-step time integration methods are widely used for solving structural dynamics problem. One difficult yet critical choice an analyst must make is to decide an appropriate time step size. The choice of time step size has a significant effect on solution accuracy and computational expense. The objective of this research is to derive error estimate for newly developed time integration method and develop automatic time step size control algorithm for structural dynamics. A formula for computing error tolerance is derived based on desired period resolution. An automatic time step size control strategy is proposed based on a normalized local error estimate for the generalized-α method. Numerical examples demonstrate the developed strategy satisfies general design criteria for time step size control algorithm for dynamic problem.