• Journal of the Korean Academy of Clinical Electrophysiology
• /
• v.5 no.2
• /
• pp.95-105
• /
• 2007

The purpose of this study is to define the effect of taping and icing on muscle fatigue at knee joint of ordinary adult. The 30 adults meeting research standard were chosen to be observed. The period of the research was 9 days and N-K table was used as equipment to measure position sense of knee joint. Heart rate monitor was also used to measure heart beat during both when in comfortable state and in exercises. For the method of this study, error in position sense of knee joint was measured right before fatigue occurs. Then volunteers were to be exercised for 10 minutes in treadmill aiming to raise the heart beat to 90%. If muscle fatigue occurs after the exercise, let the comparative group rest for 20 minutes while applying taping for group 1 and icing for group 2. For the icing, it was applied for 3 minutes followed by 1 minute rest. 5 sets of icing were applied on thighs and calf each, Then error of position sense of knee joint was measured same way it was done before muscle fatigue. As the result, there were similar differences among comparative group(p<.05), group 1 and group 2 before the muscle fatigue and after the muscle fatigue. There were similar differences in comparative group with muscle fatigue, group 1 and group 2 as the result of one-way ANOVA and with further examination, similar differences were only found in between comparative group and group 2(p<.05). With the result, we can see there wasn't clear effect of rest, icing or taping, however, group 2 with icing showed better condition compared to comparative group who have rested without any application.

• Journal of the Semiconductor & Display Technology
• /
• v.12 no.2
• /
• pp.13-17
• /
• 2013

In lighting system where several large-area organic light-emitting diode (OLED) lighting panels are involved, panel aging may appear differently from each other, resulting in a falling-off in lighting quality. To achieve uniform light output across large-area OLED lighting panels, we have employed an optical feedback circuit. Light output from each OLED panel is monitored by the optical feedback circuit that consists of a photodiode, I-V converter, 10-bit analogdigital converter (ADC), and comparator. A photodiode generates current by detecting OLED light from one side of the glass substrate (i.e., edge emission). Namely, the target luminance from the emission area (bottom emission) of OLED panels is monitored by current generated from the photodiode mounted on a glass edge. To this end, we need to establish a mapping table between the ADC value and the luminance of bottom emission. The reference ADC value corresponds to the target luminance of OLED panels. If the ADC value is lower or higher than the reference one (i.e., when the luminance of OLED panel is lower or higher than its target luminance), a micro controller unit (MCU) adjusts the pulse width modulation (PWM) used for the control of the power supplied to OLED panels in such a way that the ADC value obtained from optical feedback is the same as the reference one. As such, the target luminance of each individual OLED panel is unchanged. With the optical feedback circuit included in the lighting system, we have observed only 2% difference in relative intensity of neighboring OLED panels.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.7
• /
• pp.2610-2630
• /
• 2021

The aim of this paper is to propose the alternative algorithm to finish the process in public key cryptography. In general, the proposed method can be selected to finish both of modular exponentiation and point multiplication. Although this method is not the best method in all cases, it may be the most efficient method when the condition responds well to this approach. Assuming that the binary system of the exponent or the multiplier is considered and it is divided into groups, the binary system is in excellent condition when the number of groups is small. Each group is generated from a number of 0 that is adjacent to each other. The main idea behind the proposed method is to convert the exponent or the multiplier as the subtraction between two integers. For these integers, it is impossible that the bit which is equal to 1 will be assigned in the same position. The experiment is split into two sections. The first section is an experiment to examine the modular exponentiation. The results demonstrate that the cost of completing the modular multiplication is decreased if the number of groups is very small. In tables 7 - 9, four modular multiplications are required when there is one group, although number of bits which are equal to 0 in each table is different. The second component is the experiment to examine the point multiplication process in Elliptic Curves Cryptography. The findings demonstrate that if the number of groups is small, the costs to compute point additions are low. In tables 10 - 12, assigning one group is appeared, number of point addition is one when the multiplier of a point is an even number. However, three-point additions are required when the multiplier is an odd number. As a result, the proposed method is an alternative way that should be used when the number of groups is minimal in order to save the costs.

• Asia Marketing Journal
• /
• v.12 no.4
• /
• pp.55-78
• /
• 2011

Recently strategic alliance between business firms has become prevalent to overcome increasing competitive threats and to supplement resource limitation of individual firms. As one of allianced sales promotion activities, a new type of discount program, so called "Alliance Card Discount", is introduced with the partnership of credit cards and loyalty cards. The program mainly pursues short-term sales growth by larger discount scheme while spends less through cost share among alliance partners. Thus this program can be regarded as cost efficient discount promotion. But because there is no solid evidence that it can really deliver profitable sales growth, an empirical study for its effects on sales and profit should be conducted. This study has two basic research questions concerning the effects of allianced discount program ; 1)the possibility of sales increase 2) the profitability of the discount driven sales. In F&B industry, sales increase mainly comes from increased guest count. Especially in family restaurants, to increase the number of guests we need to enlarge the size of visitor group (number of visitors for one group) because customers visit by group in a special occasion. And because they pay the bill by group(table), the increase of sales per table is a key measure for sales improvement. The past researches for price & discount sensitivity and reference discount rate explain that price sensitive consumers have narrow reference discount zone and make rational purchase decision. Differently from all time discount scheme of regular sales promotions, the alliance card discount program only provides the right to get discount like discount coupon. And because it is usually once a month opportunity given by the past month usage level, customers tend to perceive alliance card discount as a rare chance to get. So that we can expect customers try to maximize the discount effect when they use the limited discount opportunity. Considering group visiting practice and low visit frequency of family restaurants, the way to maximize discount effect should be the increase the size of visit group. And their sensitivity to discount and rational consumption behavior defer the additional spending for ordering high price menu, even though they get considerable amount of savings from the discount. From the analysis of sales data paid by alliance discount cards for four months, we found the below. 1) The relation between discount rate and number of guest per table is positive : 25% discount results one additional guest 2) The relation between discount rate and the spending per guest is negative. 3) However, total profit amount per table is increased when discount rate is increased. 4) Reward point accumulation & redemption did not show any significant relationship with the increase of number of guests. These results suggest that the allianced discount program substantially contributes to sales increase and profit improvement by increasing the number of guests per table. Though the spending per guest is decreased by discount rate increase, the total amount of profit per table is improved. It seems the incremental profit by increased guest count offsets the profit decrease. Additional intriguing finding is the point reward system does not have any significant impact on the increase of number of guest, even if the point accumulation & redemption of loyalty program are usually regarded as another saving offers by customers. In sum, because it is proved that allianced discount program with credit cards and loyalty cards is effective to both sales drive and profit increase, the alliance card program could be recommended as strategically buyable program.

• Journal of the Korea Computer Industry Society
• /
• v.2 no.6
• /
• pp.837-844
• /
• 2001

XML has already been settled down as a standard for the exchange of commercial data on the web. Though most institutions have a wish to use XML document as an EDI form for all sorts of document exchange, it is unfortune that previous commercial data is still saved in the relational form of data base. Therefore, it is necessary that data saved in the relational form of data base be transformed into XML document form for the better use of document exchange. In order to transform relational form of data base to XML, one solution is to publish XML document by way of mapping each field of the relational form of data base table onto XML. However, in the case of building one XML document out of more i~km two data base tables, a join should be performed since a mere mapping associated with DTD tan not solve the problem. In this paper, we build the view for the XML in which alignments generated from the join are presented. and then through this view the contents with the relational form of data base should be transformed into XML. Briefly speaking, This paper aims to propose algorithm concerned with this transformation and to realize it.

• Restorative Dentistry and Endodontics
• /
• v.28 no.3
• /
• pp.203-208
• /
• 2003

The purpose of this study was to evaluate the effect of salivary contamination of teeth on bonding efficacy of self-priming and self-etching DBSs. The materials used were Single Bond(SB, self-priming system, 3M), Unifil Bond(UB, self-etching system, GC), and Scotchbond Multi-Purpose Plus(SM, 3M) as control. Forty five human molars randomly allocated to three groups as dentin bonding systems tested and embedded in epoxy resin. Then the specimens were wet-ground to expose flat buccal enamel surface or flat occlusal dentin surface and cut bucco-lingually to form two halves with slow speed diamond saw. One of them was used under non-contamination, other under contamination with saliva. The bonding procedure was according to the manufacturer's directions and resin composite(Z-100, 3M Dental Products, St. Paul, MN) was built-up on the bonded surface 5mm high. The specimens were ground carefully at the enamel-composite interface with fine finishing round diamond bur to create an hour-glass shape yielding bonded surface areas of $1.5{\pm}0.1\textrm{mm}^2$. The specimens were bonded to the modified microtensile testing apparatus with cyanoacrylate, attached to the universal testing machine and stressed in tension at a CHS of 1mm/min. The tensile force at failure was recorded and converted to a tensile stress(MPa). Mean values and standard deviations of the bond strength are listed in table. One-way ANOVA was used to determine significant difference at the 95% level. The bond strength of SBMP and SB were not affected by salivary contamination, but that of UB was significantly affected by salivary contamination. These results indicate that DBSs with total etch technique seems less likely affected by salivary contamination in bonding procedure.

• Journal of The Korean Society of Integrative Medicine
• /
• v.9 no.4
• /
• pp.183-190
• /
• 2021

Purpose : The purpose of this study was to investigate the effect of side planks on the muscle thickness of the core muscles, external oblique, internal oblique, and transverse abdominis, and this study was conducted to compare whether side plank exercise according to the application of various unstable support surfaces increases the thickness by activating the action of the muscles. Methods : The subjects of this study were 30 healthy adults and were randomly and equally assigned to three groups by a random number table. All subjects were divided into three groups according to the application of an unstable support surface during the side plank(Group A = stable support, Group B = one unstable support, Group C = two unstable supports). The side plank exercise was performed 30 minutes a day, 3 times a week for a total of 4 weeks. The muscle thickness of the core muscle was measured before the intervention, 2 weeks, 4 weeks, and 3 times in total. All measured data were comparatively analyzed by repeated measures ANOVA and one-way ANOVA. The statistical significance level was set to .05. Results : The results of this study were as follows : 1. All muscles showed an interaction between training period and group. 2. There was a significant difference between the groups at the 2 weeks and 4 weeks of the internal oblique and transverse abdominis muscle measurements. Conclusion : The thickness of the abdominal muscle increased during the side plank exercise according to the support surface, and the thickness of the abdominal muscle increased the most during the side plank exercise on the unstable support surface. Therefore, it is thought that the addition of an unstable support surface will provide a more effective therapeutic effect on the thickness change of the abdominal muscle during side plank exercise.

• Journal of the Daesoon Academy of Sciences
• /
• v.44
• /
• pp.213-261
• /
• 2023

The purpose of this article was to examine whether the parallel passages from The Canonical Scripture and Jeungsan Cheonsa Gongsagi (甑山天師公事記 Records of the Reordering Works of Celestial Master Jeungsan), the first full-length record related to the life of Kang Jeungsan compiled by Lee Sang-ho, indicate the same chronology. A comparison of the contents between The Canonical Scripture and Jeungsan Cheonsa Gongsagi revealed the following. The contents of The Canonical Scripture are categorized by a table of contents. By way of contrast, the contents of Jeungsan Cheonsa Gongsagi, is organized year by year. When parallel passages appear, the two texts tend to indicate the same year for specific events, but the chronology of some events do not match. A comparison of the contents of The Canonical Scripture and the first edition of Daesoon Jeongyeong (大巡典經 The Canonical Scripture of the Great Itineration) shows the following. Once again, the contents of The Canonical Scripture are organized via a table of contents. The contents of the first edition of the Daesoon Jeongyeong are also indicated through a table of contents. When lined up for comparison, most of the passages show the same content to have occurred in matching years. However, new contents are contained in this record that were absent in Jeungsan Cheonsa Gongsagi. All of these texts contain a summary of the life of Kang Jeung-san; however, they are organized differently. Jeungsan Cheonsa Gongsagi presents that summary chronologically (year by year with some gaps in years). Daesoon Jeongyeong and The Canonical Scripture both feature a table of contents wherein chapters are based around specific themes. One key takeaway is that different passages appear in the contents of each text. Also, The Canonical Scripture and the first edition of the Daesoon Jeongyeong contain some parallel passages wherein the two texts disagree on what year some events took place. Despite the different style of organization, Jeungsan Cheonsa Gongsagi and The Canonical Scripture can still be compared and such comparison shows the same pattern as comparison between The Canonical Scripture and Daesoon Jeongyeong. As a result of organizing and comparing the contents of the table of contents with the chronological record, the parallel passages wherein chronology is disputed can be highlighted and the introduction of new passages can also be shown.

• The Journal of Korean Medical History
• /
• v.17 no.2
• /
• pp.111-127
• /
• 2004

This paper is mainly on the rsearch of the prescriptions of "Sanbeon-bang(刪 繁方)". For the research of prescription, investigated "Sanbeon-bang" from the side of symptoms of a disease, number of drugstuffs, table of contents, drugstuffs and acupuncture and moxibustion. With these investigation, made out a few tables, and with these tables made an attempt to understand the whole prescriptions of "Sanbeon-bang". "Sanbeon-bang" is of rich contents in internal medicine. Among internal medicine, related to Oro-Yukgeuk-Chilsang(五勞-六極-七傷) was most abundant. So we can guess "Sanbeon-bang" was a medical book specialized in exhaustion syndromes. It also deals with the Samcho-syndromes, as investigate from medical comments, has the perfect system of prescription in relative. From the investigation of the combination of drugstuffs, ascertained that, the number of simple prescription composed of one drugstuff was 38, combinational prescription composed of two drugstuffs was 9, minor prescription composed of three to five drugstuffs was 47, midum prescription composed of six to ten drugstuffs was 95, major prescription composed of eleven to twenty drugstuffs was 45, and mixed prescription composed over twenty drugstuffs was 1. Mentionable unique prescriptions in internal use were the forms of keeping in mouth. In external use they were fumigants, suppositories, powdered medicines, spraying the granular medication into the nasal cavity and eyedrops. And were abundant in soft extract(ointment) and plaster. In addition, there were the recordings of 18 types of cellulitis, types of incurable cellulitis and curing an illness by a charm. By the way, when comparing "Sanbeon-bang" with "Cheongeum-bang", all of which was quoted a lot in "Oedaebiyo-bang", "Cheongeum-bang" rather took medical comments of "Sanbeon-bang" than prescription. Although there were some prescriptons in "Sanbeon-bang" at the same category, "Cheongeum-bang" took another prescriptions which are more complexed than those of "Sanbeon-bang". In the same way, when comparing "Cheongeum-bang" with "Sonjinin-Cheongeum-bang(孫眞人千金方)", which didn't go through the correction of GyojeongUiseoguk of Bug-Song goverment, "Cheongeum-bang" often didn't take the prescriptions of "Sonjinin-Cheongeum-bang". Hence we can guess, "Cheongeumyo-bang" may have added a lot of prescriptions when undergoing the correction of of GyojeongUiseoguk. The total number of species of drugstuffs in "Sanbeon-bang" from the investigation was 284. The plant drugs were 208 species, the animal were 31 species, the minerals were 19 species and the other were 26 species. The prescriptions related to acupuncture and moxibustion in "Sanbeon-bang" were only moxibustional prescriptions. Which appeared one time per exhaustion and steaming of bone syndrome, Oro-Yukgeuk-Chilsang and Samcho syndrome. Appeared six times in muscle syndromes. But I cannot imagine the original form of acupuncture and moxibustion in "Sanbeon-bang" for deficiency of data.

• The Journal of Sustainable Design and Educational Environment Research
• /
• v.19 no.4
• /
• pp.60-69
• /
• 2020

This research is a preliminary study to find out the module of 20 students in a classroom. This research investigated the widths of passages in the 30 classrooms of 5 elementary schools in Namyangju City, Korea. The conclusions were as follows: First, the area of unit for 1 student was 650 (W) × 950 (D). Second, the desk placements for most classrooms were one-way types (87%), and group-study types constituted 13%. Third, the width between the blackboard and the very front desk was 2.17 m. The width of passage between the very back seat and the backside lockers was 1.32 m. The width of passage between the sidewall and the nearby desk was 0.8 m. The width of passage between the window and the nearby desk was 0.8 m. The average widths of 2 vertical passages between the desks were respectively 0.67 m and 0.68 m. Fourth, the area of the teacher was 2.1-2.25 m × 2.16 m = 4.5-4.8 ㎡.