• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 춘계학술대회 논문집 센서 박막재료연구회 및 광주 전남지부
• /
• pp.103-105
• /
• 2008

In, this paper, we consider the relation between on-line monitoring and diagnostics on the one hand and high-voltage (HV) withstand and partial discharge (PO) on-site testing on the other. HV testing supplies the basic data (fingerprints) for diagnostics. In case of warnings by on-line diagnostic systems, off-line withstand and PO testing delivers the best possible information about defects and enables the classification of the risk. Because alternating voltage (AC) is the most important test voltage, the AC generation on site is considered. Frequency tuned resonant (ACRF) test systems are best adapted to on-site conditions. They can be simply combined with PO measuring equipment. The available ACRF test systems and their application to electric power equipment -from cable systems to power transformers - is described.

• Wind and Structures
• /
• 제16권4호
• /
• pp.373-391
• /
• 2013

This is the first of two companion papers that analyse ten years of on-site monitoring data for the Confederation Bridge to determine the validity of the original wind speeds and wind loads predicted in 1994 when the bridge was being designed. The check of the original design values is warranted because the design wind speed at the middle of Northumberland Strait was derived from data collected at shore-based weather stations, and the design wind loads were based on tests of section and full-aeroelastic models in the wind tunnel. This first paper uses wind, tilt, and acceleration monitoring data to determine the static and dynamic responses of the bridge, which are then used in the second paper to derive the static and dynamic wind loads. It is shown that the design ten-minute mean wind speed with a 100-year return period is 1.5% less than the 1994 design value, and that the bridge has been subjected to this design event once on November 7, 2001. The dynamic characteristics of the instrumented spans of the bridge including frequencies, mode shapes and damping are in good agreement with published values reported by others. The on-site monitoring data show bridge response to be that of turbulent buffeting which is consistent with the response predicted at the design stage.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제15권1호
• /
• pp.285-301
• /
• 2021

Recently, with the diversification of media services and the development of smart devices, users have more opportunities to use digital content, such as movies, dramas, and music; consequently, the size of the copyright market expands simultaneously. However, there are piracy sites that generate revenue by illegal use of copyrighted works. This has led to losses for copyright holders, and the scale of copyrighted works infringed due to the ever-increasing number of piracy sites has increased. To prevent this, government agencies respond to copyright infringement by monitoring piracy sites using online monitoring and countermeasure strategies for infringement. However, the detection and blocking process consumes a significant amount of time when compared to the rate of generating new piracy sites. Hence, online monitoring is less effective. Additionally, given that piracy sites are sophisticated and refined in the same way as legitimate sites, it is necessary to accurately distinguish and block a site that is involved in copyright infringement. Therefore, in this study, we analyze features of piracy sites and based on this analysis, we propose an intelligent detection technique for piracy sites that automatically classifies and detects whether a site is involved in infringement.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.269-272
• /
• 2004

The target of this paper is the development of Web-based monitoring & control system which is for effective and economic management of mold manufacturing process. This system has three module; G-code Control, Monitoring Module and Result analysis module. Also, as the environment of development is based on internet, this system which is possible to the remote site management of manufacturing process works on Web. To be possible to control the manufacturing monitoring by client, each module is made ActiveX control and is based on socket communication. This system makes the foundation which is possible to manage the mold manufacturing process efficiently from remote site by matching real-time monitoring with manufacturing process in factory using G-code control and displaying the result of manufacturing using Ch-CGI.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 가을학술발표대회논문집
• /
• pp.165-166
• /
• 2023

Construction inspection and monitoring are key activities in construction projects. Automation of inspection tasks improves the limitations and inefficiencies of manual construction inspections, enabling systematic and consistent construction inspections. In this paper, an RTSP (Real-Time Streaming Protocol) system is used to remotely manage and supervise the construction site without having to visit the construction site by deploying a robot on site on behalf of four construction stakeholders (owner, supervisor, constructor, and designer). I would like to propose. The proposed system can contribute to identifying and monitoring the process process and work results at the construction site in real time.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2004년도 유체기계 연구개발 발표회 논문집
• /
• pp.385-389
• /
• 2004

Test facilities for the wind turbine performance monitoring and mechanical load measurements are installed in Vestas 100 kW wind turbine in Wollyong test site, Jeju island. The monitoring system consists of Garrad-Hassan T-MON system, telemetry system for blade load measurement, various sensors such as anemometer, wind vane, strain gauge, power meter, and etc. The experimental procedure for the measurement of wind turbine loads, such as edgewise(lead-lag) bending moment, flapwise bending moment, and tower base bending moment, has been established. Strain gauges are on-site calibrated against load cell prior to monitoring the wind turbine loads. Using the established monitoring system, the wind turbine is remotely monitored. From the measured load data, the load analysis has been performed to obtain the load power spectral density and the fatigue load spectra of the wind turbine.

• 한국BIM학회 논문집
• /
• 제11권2호
• /
• pp.24-32
• /
• 2021

Recently, starting with smart construction research, interest in technology that automates construction site management using artificial intelligence technology is increasing. In order to automate construction site management, it is necessary to recognize objects such as construction equipment or workers, and automatically analyze the relationship between them. For example, if the relationship between workers and construction equipment at a construction site can be known, various use cases of site management such as work productivity, equipment operation status monitoring, and safety management can be implemented. This study derives a real-time object detection platform architecture that is required when performing construction site management using deep learning technology, which has recently been increasingly used. To this end, deep learning models that support real-time object detection are investigated and analyzed. Based on this, a deep learning model development process required for real-time construction site object detection is defined. Based on the defined process, a prototype that learns and detects construction site objects is developed, and then platform development considerations and architecture are derived from the results.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2002년도 학술발표회 발표논문집
• /
• pp.137-140
• /
• 2002

The monitoring system for integrated management of on-site wastewater treatment plants(biofilter) was designed and its operation program was developed. In design process, the research on monitoring parameters which will be able to represent condition and operation of the pilot plants was accomplished, and these parameters came to reveal with ORP(Oxidation-Reduction Potential), water level, pump and power on/off. Proposed monitoring system is composed with measurement, control, communication and display device, and PCB(Prototype Circuit Boards) and microcontroller (PIC16F877) technique are applied to its design of control device for performing specific function. also, The operation program of PC setup is developed in order to provide a convenience to the manager.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2002년도 학술발표회 발표논문집
• /
• pp.13-16
• /
• 2002

Operation of experimental site on the rural water is necessary to research on the effective development and management of agricultural water. Hydrological data on the watershed runoff, reservoir storage, irrigation and drainage are measured and accumulated. For the monitoring system of the experimental site, four rainfall gauging stations and twenty-six water level gauging stations are established and operated. Analysis of measured data are processed for rainfall amount and intensity, water level and discharge.

• 한국데이터정보과학회:학술대회논문집
• /
• 한국데이터정보과학회 2004년도 춘계학술대회
• /
• pp.225-236
• /
• 2004

Every web server comprises a repository of all actions and events that occur on the server. Server logs can be used to quantify user traffic. Intelligent analysis of this data provides a statistical baseline that can be used to determine server load, failed requests and other events that throw light on site usage patterns. This information provides valuable leads on marketing and site management activities. In this paper, we propose a method of design for log analysis system using RTMA(realtime monitoring and analysis) technique.