• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.39 no.1
• /
• pp.7-15
• /
• 2002

This paper is concerned with remote environment monitoring & control for the breeding house as scattering far and wide. The environment data is detected in the breeding house that is collected to one processor. It's adapted to the PSTN(public switch tele-phone network) and multi-processing for exchange the environment data and the control data in between the manager and a breeding house by micro-processor. We have designed the algorithm of the communication sequence through the experimental research. This system is composed of sensor interface, FSK communications, LED display, data latch and MCS-51 single-chip. The S/W is composed with data acquisition by multi-processing, data communication and interrupt. And this paper is Proposed the DB structure algorithm concern to a mount scale using web design. The subject is a performance of effective management for the breeding house.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.3 s.357
• /
• pp.78-84
• /
• 2007

A multistandard direct-conversion mixer for WCDMA, Wibro, and 802.11a/b/g is designed in 0.18 um CMOS technology To support multistandard and to reduce the chip area the switched inductor is used as the matching method. This switched inductor matching network selects the mixer's operation frequency band by turning on or off the switch transistor. Since the performances of mixer and operation frequency can be affected by the parasitic of switch transistor the mixer should be designed with the optimized size of switch to minimize parasitic effects. Proposed mixer is able to achieve return loss less than -13 dB in $2.1\sim2.5GHz$ and $5.1\sim5.9GHz$ bands with the suitable performance to meet requirements of WCDMA, WiBro, and 802.11a/b/g.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.5
• /
• pp.45-55
• /
• 2010

While Long Term Evolution-Frequency Division Duplexing (LTE-FDD) is regarded as one of the strong candidates for "4G" wireless broadband access in FDD field, LTE-Time Division Duplexing (TDD) is emerging as one possible migration path for WiMAX-TDD in some cases as well as the migration path for Time Division-Synchronous Code Division Multiple Access (TD-SCDMA). In this paper, we analyze the feasibility of dual mode with LTE-TDD in two combinations: dual mode LTE-FDD/TDD and dual mode Worldwide Interoperability for Microwave Access (WiMAX)-TDD/LTE-TDD. Thanks to the commonality in numerology, terminology, and frame structure between LTE-FDD and LTE-TDD, dual mode LTE-FDD/TDD looks feasible in a cost-effective manner. Thanks to the commonality in scheduling algorithm, control mechanism, and supported spectrum bands, it is shown that dual mode WiMAX-TDD/LTE-TDD looks feasible as well. It should be also noted that the commonality in numerology and frame structure is critical for building a chip while the commonality in algorithms and control mechanisms is critical to make it work.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.5
• /
• pp.213-217
• /
• 2015

Seoul has 25 areas of City Hall, the ward office has been operating theater at least 1 in maximum 4-5 locations to various sized places. The purpose of theater has been used for a variety of purposes to typical performances of Drama and Musicals, School play, Lecture. This points to a Variety of ideas for use, when replacing an exsting halogen luminaires, appropriate LED luminaires, Learn more if there is any advantage in terms of the energy saving part. it will be applied to the value for the energy saving to ward office hall of the actual targets. In case replacement in existing halogen luminaires to LED luminaires, to energy savings of about 80% appear around. Get the advantages of the various functional properties a device chip of the LED itself, Forward will be referred to as easy to replace the halogen luminaires and LED luminaires.

• Journal of Korea Society of Industrial Information Systems
• /
• v.23 no.4
• /
• pp.23-31
• /
• 2018

This paper presented the implementation and design of the 2T-2R wireless HD video streaming systems over 1.7 GHz frequency band using 3GPP LTE-TDD standard on NI USRP RIO SDR platform. The baseband of the system used USRP RIO that are stored in Xilinx Kintex-7 chip to implement LTE-TDD transceiver modem, the signal that are transmitted from USRP RIO up or down converts to 1.7 GHz by using self-designed 1.7 GHz RF transceiver modules and it is finally communicated HD video data through self-designed 2x9 sub array antennas. It is that communication method between USRP RIO and Host PC use PCI express x4 to minimize delay of data to transmit and receive. The implemented system show high error vector magnitude performance above 32 dBc and to transmit and receive HD video in experiment environment anywhere. The proposed hybrid beam forming system could be used not only in the future 5G mobile communication systems under 6 GHz frequency band but also in the systems over 6 GHz frequency band like ones in mmWave frequency bands.

• Journal of the Korean Society of Radiology
• /
• v.1 no.1
• /
• pp.39-44
• /
• 2007

In this study, wireless measurement technique for human motion was developed to monitor movement disorder patients during their daily life. MICA, TinyOS, and nesC, developed by UC Berkeley, were used as wireless sensor, its software platform, and programming language. The human motion data, generated by two axial accelerometer(ADXL202) was transmitted to PDA(iPaq3630) by 916Mhz short range communication chip(TR1000). It could be stored at PDA by simple Windows CE programming. To test the developed device, it was attached at human chest and the acquired data was shown as a graph during his motion of sitting, standing, and lying. The result showed that human motion could be logged without any hooking and constraints. Therefore, this device can be used to monitor patient's movement disorder and activity of daily life(ADL).

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.7
• /
• pp.1442-1447
• /
• 2004

In this paper, a 6-Bit CMOS Folding and Interpolating AD Converter is presented. The converter is considered to be useful as an integrated part of a VLSI circuit handling both analog and digital signals as in the case of HDD or LAN applications. A built-in analog circuit for VLSI of a high-speed data communication requires a small chip area, low power consumption, and fast data processing. The proposed folding and interpolating AD Converter uses a very small number of comparators and interpolation resistors, which is achieved by cascading a couple of folders working in different principles. This reduced number of parts is a big advantage for a built-in AD converter design. The design is based on 0.25m double-poly 2 metal n-well CMOS process. In the simulation, with the applied 2.5V and a sampling frequency of 500MHz, the measurements are as follows: power consumption of 27mw, INL and DNL of $\pm$0.1LSB, $\pm$0.15LSB each, SNDR of 42dB with an input signal of 10MHz.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.6 no.3
• /
• pp.381-387
• /
• 2011

Measurement controller that acquire and control and observe data from scattering sensors is organic with central control room. Therefore, measurement controller is efficient wireless network than wire network. But, serious problem is happened in security from outside if use wireless network. Therefore, this paper proposed suitable MS-WP cryptographic system to measurement control wireless network to augment network efficiency of measure controller. Result that implement proposed MS-WP cryptographic system by chip level and achieve a simulation, confirmed that 130% processing rate increase and system efficiency are increased double than AES algorithm. Proposed MS-WP cryptographic system augments security and is considered is suitable to measurement controller because that low power is possible and the processing speed is fast.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.3 no.3
• /
• pp.177-182
• /
• 2008

Because output of multi-code CDMA system adapted high speed data transmission becoming multi-level system use linear amplifier in output stage and complex output signal. Therefore, Multi-Code CDMA system has shortcoming of high price, high complexity etc. Binary CDMA technology that allow fetters in existing CDMA technology to supplement this shortcoming proposed. In binary CDMA system When correlator process high speed data, bottle-neck phenomenon is happened on synchronization acquisition process, it is very important parameter. Because existent correlator must there be advantage that power consumption is small but flow addition of several stages to receive correlation's value, the processing speed has disadvantage because the operation amount is much. Therefore in this paper, proposed correlator has characteristic such as data is able to high speed processing, chip area is independent and power consumption is constant in structure in binary CDMA system.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.3
• /
• pp.165-171
• /
• 2019

The study of the computer architecture has shown that major improvements in price-to-energy performance stems from domain-specific hardware development. This paper analyzes the tensor processing unit (TPU) ASIC which can accelerate the reasoning of the artificial neural network (NN). The core device of the TPU is a MAC matrix multiplier capable of high-speed operation and software-managed on-chip memory. The execution model of the TPU can meet the reaction time requirements of the artificial neural network better than the existing CPU and the GPU execution models, with the small area and the low power consumption even though it has many MAC and large memory. Utilizing the TPU for the tensor flow benchmark framework, it can achieve higher performance and better power efficiency than the CPU or CPU. In this paper, we analyze TPU, simulate the Python modeled OpenTPU, and synthesize the matrix multiplication unit, which is the key hardware.