• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.1065-1068
• /
• 2003

The nano imprint process is one of the next generation lithography has been mentioned as one of major nanoreplication techniques because it is simple process, low cost, high replication fidelity and relatively high throughput. This process requires a surface contact between a template with patterns and a wafer on a stage. After contact, the vertical moving the template to the wafer causes some directional motions of the stage. Thus the stage must move according to the motions of the template to avoid the damage of the transferred patterns on the wafer. This study is to develop the wafer stage with a passive compliance to overcome the damage. This stage is designed with the concept like that it has a monolithic, symmetry and planar 6-DOF mechanism.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.2
• /
• pp.46-52
• /
• 2005

The sapphire wafer was polished by the implementation of the surface machining technology based on nano-tribology, The removal process has been performed by grinding, lapping and chemical-mechanical polishing. For the chemical mechanical polishing process, the chemical reaction between the slurry and sapphire wafer was investigated in terms of the change of Zeta-potential between two materials. The Zeta-potential was -4.98 mV without the slurry in deionized water and was -37.05 mV for the slurry solution. By including the slurry into the deionized water the Zeta-potential -29.73 mV, indicating that the surface atoms of sapphire become more repulsive to be easy to separate. The average roughness of the polished surface of sapphire wafer was ranged to 1∼4$\AA$.

• International Journal of Precision Engineering and Manufacturing
• /
• v.9 no.2
• /
• pp.8-10
• /
• 2008

Chemical mechanical polishing (CMP) is a very precise planarization technique where a wafer is polished by a slurry-coated pad. A slurry is dropped on the rotating pad surface and is supplied between the wafer and the pad. This research aims at reducing the slurry consumption and removing waste particles quickly from the wafer. To study the roles of grooves, slurry flows were simulated using the volume of fluid method (two-phase model for air and slurry) for pads with no grooves, and for pads with circular grooves.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.5 s.98
• /
• pp.40-47
• /
• 1999

In CMP for semiconductor wafer films, the acceptable within-chip planarity, within-wafer and wafer-to-wafer nonuniformity could be achieved by conditioning. The role of conditioning is to remove continuously polishing residues from pad and to maintain the initial pad surface pores. To reach these requirements, the diamond grits disk has been considered as a conventional conditioner. However, we have investigated many defects as scratch on wafers out of diamond grits shedding, contaminations from bonding materials, and pad pore subsidences by over-conditioning. So, this paper studies the effect of ultrasonic vibration in CMP conditioning as a representative. The effect of ultrasonic vibration was certified through ILD, Metal CMP.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.5
• /
• pp.606-613
• /
• 2011

In this paper, patterns of laser scattering and detection of micro defects have been investigated based on Rayleigh criterion for silicon wafer in solar cell. Also, a new laser scattering mechanism is designed using characteristics of light scattering against silicon wafer surfaces. Its parameters are to be optimally selected to obtain effective and featured patterns of laser scattering. The optimal parametric ranges of laser scattering are determined using the mean intensity of laser scattering. Scattering patterns of micro defects are investigated at the extracted parameter region. Among a lot of pattern features, both maximum connected area and number of connected component in patterns of laser scattering are regarded as the important information for detecting micro defects. Their usefulness is verified in the experiment.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.16 no.9
• /
• pp.820-827
• /
• 2004

The propulsion force acting on a wafer in an air levitation system was measured accurately and then, the corresponding force coefficient was determined. The theoretical propulsion force on the wafer bottom surface were obtained by CFD simulations and from these results the propulsion force coefficient was deduced. The transportation velocity of a wafer was estimated by using both experimental and numerical force coefficients, for various air velocity of nozzle injection. When the numerical results are compared to the experimental data, the numerical results agree well Quantitatively.

• The Korean Journal of Ceramics
• /
• v.3 no.1
• /
• pp.18-20
• /
• 1997

The fabrication process of silicon-diamond(SOD) structure wafer were studied. Microwave plasma chemical vapor deposition (MWPCVD) and annealing technology were used to synthesize diamond film with high resistivity and thermal conductivity. Bonding and etchback silicon-on-diamond (BESOD) were utilized to form supporting substrate and single silicon thin layer of SOD wafer. At last, a SOD structure wafer with 0.3~1$\mu\textrm{m}$ silicon film and 2$\mu\textrm{m}$ diamond film was prepared. The characteristics of radiation for a CMOS integrated circuit (IC) fabricated by SOD wafer were studied.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2003.09a
• /
• pp.165-172
• /
• 2003

Wafer-level packaging technology has become established with increase of demands for miniaturizing and realizing lightweight electronic devices evolution. This packaging technology enables the smallest footprint of packaged chip. Various structures and processes has been proposed and manufactured currently, and products taking advantages of wafer-level package come onto the market. The package enables mounting semiconductor chip on print circuit board as is a case with conventional die-level CSP's with BGA solder bumps. Bumping technology is also advancing in both lead-free solder alternative and wafer-level processing such as stencil printing using solder paste. It is known lead-free solder bump formation by stencil printing process tend to form voids in the re-flowed bump. From the result of FEM analysis, it has been found that the strain in solder joints with voids are not always larger than those of without voids. In this paper, characteristics of wafer-level package and effect of void in solder bump on its reliability will be discussed.

• Journal of the Semiconductor & Display Technology
• /
• v.10 no.2
• /
• pp.7-12
• /
• 2011

In this paper, a laser scattering mechanism are designed to detect micro defects such as dent, scratch, pinhole, etc. Its influential parameters are experimentally selected and scattering patterns of micro defects have been analyzed for silicon wafer in solar cell. As a result of experiments, scattered lights are rather increased in wafer surface with micro defects, in comparison to no micro ones. Scattering parameters are optimally selected for obtaining robust and high quality laser scattering images of micro defects. It is shown that scattered light components are linearly increased according to the increase of micro defect sizes, and the depth of micro-defects give a large influence on optical deflection.

• Journal of Korean Institute of Industrial Engineers
• /
• v.35 no.4
• /
• pp.266-279
• /
• 2009

This paper focuses on the problem of scheduling wafer lots with limited waiting times between pairs of consecutive operations in a semiconductor wafer fabrication facility. For the problem of minimizing total tardiness of orders, we develop a priority rule based scheduling method in which a scheduling decision for an operation is made based on the states of workstations for the operation and its successor or predecessor operation. To evaluate performance of the suggested scheduling method, we perform simulation experiments using real factory data as well as randomly generated data sets. Results of the simulation experiments show that the suggested method performs better than a method suggested in other research and the one that has been used in practice.