• Proceedings of the KOSOMBE Conference
• /
• v.1991 no.11
• /
• pp.79-82
• /
• 1991

Digital FHR monitoring system based on the personal computer combined wi th the digital signal processing (DSP) board was implemented. The DSP board acquires and digitally processes ultrasound fetal Doppler signal for digital rectification, envelope detection, autocorrealtion function calculation and its peak position detection. The personal computer interfaced with the DSP board is in charge of graphic display, hardcopy, data taransmission and on-line analysis of fetal heart rate change including on-line warning system, base-line estmation, acceleration, deceleration and variability. The advantages of PC-DSP based system can be summarized as follows: 1) Minimum hardware realization. 2) Increased flexibility. 3) Total care system.

• Proceedings of the KIEE Conference
• /
• 2005.07e
• /
• pp.58-60
• /
• 2005

초고압 선로에 대한 풍부한 진단 경험과 축적된 Know-how를 바탕으로 선로의 이상유무를 원격으로 진단, 감시하는 On-line PD Monitoring System을 개발하였다. 초고압 선로의 이상 유무를 활선상태에서 정밀하게 진단할 수 있는 전기적인 측정방법으로 부분방전이 유일하다. 그러나 부분방전 신호는 미약하고 주위 노이즈와 구분이 어렵기 때문에 측정 뿐만 아니라 분석하기가 어렵다. 부분방전 측정 장비는 이러한 노이즈를 효과적으로 제거하고 측정된 신호를 의미있는 정보로 가공하여 사용자에게 제공해 주어야 한다. 본 논문에서는 이러한 조건들을 충족하는 고성능의 원격 진단시스템에 관하여 서술하였다.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2006.05a
• /
• pp.481-486
• /
• 2006

In this paper, a new on-line high-voltage motor monitoring system is proposed. This system monitors the insulation condition of the stator winding by on-line measurements of partial discharge (PD). And this system displays magnitude and phase angle distribution of PD. Sensor, CC (Ceramic Coupler) is used for PD measurement. PD signals are continuously measured and digitized with a A/D converter to build the database of the high-voltage motor's insulation condition. Also, this system can communicate with the central monitoring system via RS-232, 422, and TCP/IP. This helps more efficient operation and maintenance of the high-voltage motor.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.5
• /
• pp.413-417
• /
• 2010

Line to ground faults by deterioration of insulators has frequently occurred in power system, and the main cause is surface contamination of the insulators. The contamination of insulator is analyzed by monitoring the surface leakage current flowing them. The suspension insulator is monitored by installation of a zero-phase current sensor(ZCT), but the line-post insulator is impossible to apply the same method because of its large diameter structure. This paper proposed a detection method of surface leakage current for a line-post insulator, and it can easily be applied to new and/or built insulators. The leakage current is indirectly calculated from the potential difference between the metal electrode attached on the surface of insulator and the ground connector. To evaluate the performance of the proposed method, the leakage current is compared as a function of contamination condition controlled by the density of NaCl solution. The leakage current is proportioned to the density of NaCl solution, and the voltage detected by the electrode showed the same trend. From the experimental results, we designed and fabricated a monitoring device which is composed of a detection electrode, signal converter, microprocessor, and ZigBee, and its measurement range is $10{\mu}A{\sim}5mA$.

• Current Optics and Photonics
• /
• v.4 no.3
• /
• pp.186-192
• /
• 2020

This paper describes a real-time monitoring system in Ethernet passive optical networks (EPON) that uses burst-mode fiber Bragg grating (FBG) optical sensors. The FBG interrogation unit in the optical line terminal (OLT) transmits the monitoring wavelength to optical network units (ONUs). The FBG sensor unit in each ONU returns a burst-mode monitoring signal to the OLT. As the system applies time division multiple access (TDMA), a uniform Bragg wavelength can be used to monitor the EPON system. The FBG interrogation unit analyzes the received burst-mode monitoring signals and outputs fault information on the ONU branches in EPON. The simulation results show the effectiveness of the proposed monitoring system based on TDMA. In addition, we compared the proposed TDMA-based monitoring system with a WDMA-based monitoring system.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.6
• /
• pp.115-122
• /
• 2010

The main purpose of centralized monitoring system is to manage factory electrical installation efficiently by on-line data acquisition and supervisory control. The existing centralized system is only able to be managed by operator whenever electrical installation's faults are detected. Therefore, it may be possible for propagating the installation's faults when operator make the unexpected mistakes. To overcome the unexpected mistakes, in this paper, the author presents a centralized monitoring system for factory electrical installation using active database. by using active database production rule, stated system can minimize unexpected mistake and can operate centralized monitoring system efficiently. Test results on the five factory electrical installations show that performance is efficient and robust.

• Korean Journal of Environmental Biology
• /
• v.37 no.1
• /
• pp.82-87
• /
• 2019

Global warming has a significant impact on diverse ecosystems including agroecosystem through; changing of phenology, physiology and distribution. Monitoring of biological responses emanating from global warming is required to understand the challenges of biological diversity conservation posed by climate change. The Korean government selected four butterfly species as indicators of climate change in agroecosystem: Papilio xuthus, Pieris rapae, Colias erate, and Eurema mandarina. The aim of this study was to investigate the different monitoring methods of the butterflies in Korea and suggest a suitable monitoring method to track the population trends of butterflies in the agroecosystem. Butterfly monitoring was conducted in eight sites throughout Korea from April to October, 2018 using three survey methods: point census at rice paddy area, point census at the border between rice paddy and hill and line transect along the rice paddy and hill. Each method took approximately 30 min. to count the butterflies. A total of 4,691 butterflies and 92 species were counted: The most dominant species was Pieris rapae with a total count of 1,205 individuals followed by Polygonia c-aureum, Zizeeria maha, Colias erate, Cupido argiades and Papilio xuthus. Among the three census methods, the total number of species and individuals when using line transect method was statistically higher than in the other methods. However, the numbers of the four butterflies indicators showed no difference throughout three census methods. Based on the number of species and the total individuals butterflies in agroecosystem, we advocate for the application of line transect method as it can find more butterflies in agroecosystem. In addition, we advised for the implementation of education programs on the line transect method in butterfly identification to participants of the national monitoring program.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.570-571
• /
• 2011

CTMS(Compact Tower Online Monitoring System), which deals with the polymer insulation arms of new material, is the on-line monitoring system for verifying stability and reliability of a new Compact Tower. CTMS measures real time data from the installed sensors in a Compact Tower and transmission line, air craft warning lights for detecting and determining the life time and the replace cycle of these facilities. This paper introduces how develop the CTMS and proposes how it will be use.

• Proceedings of the KAIS Fall Conference
• /
• 2012.05b
• /
• pp.817-819
• /
• 2012

This paper propose an interested digital rights protection scheme to address problems facing contemporary DRM approached : static digital rights management, and limited application to on-line environment. We introduce a dynamic mission control technology to realize dynamic digital rights management. And we incorporate license agent to on- and off-line monitoring and tracking. The proposed system prevent illegal access and use by using PKI security method, real time action monitoring for user, data security for itself.

• Laser Solutions
• /
• v.3 no.2
• /
• pp.53-61
• /
• 2000

On the laser weld production line, a slight alteration of the welding condition produces many defects. The defects are monitored in real time, in order to prevent continuous occurrence of defects, reduce the loss of material, and guarantee good quality. The measurement system is produced by using three photo-diodes for detection of the plasma and spatter signal in CO$_2$ laser welding. For high speed CO$_2$ laser welding, laser tailored welded blanks for example, on-line weld quality monitoring system was developed by using fuzzy multi-feature pattern recognition. Weld qualities were classified optimal heat input, a little low heat input, low heat input, and focus misalignment, and final weld quality were classified good and bad.