• 제목/요약/키워드: On Resistance

검색결과 21,414건 처리시간 0.041초

유도전동기 드라이브에서의 대안모델과 일반표준모델에 기반한온라인 회전자저항 추정기의 성능 비교 연구 (Comparison Study of On-line Rotor Resistance Estimators based on Alternate QD Model and Classical QD Model for Induction Motor Drives)

  • 권춘기;김동식
    • 한국산학기술학회논문지
    • /
    • 제20권1호
    • /
    • pp.1-8
    • /
    • 2019
  • 대부분의 회전자 저항 추정기는 표준모델(CQDM)과 대안모델(AQDM)을 활용한다. 두가지 모델에 기반한 회전자 저항 추정기들은 자속이 일정한 FOC와 같은 제어 환경에서는 정확한 회전자 저항 추정치를 제공하는 것으로 확인되었다. 반면, 단위전류당최대토크 (MTPA) 제어기와 같이 자속이 변화하는 동작환경에서는, AQDM에 기반한 회전자 저항 추정기가 다른 동작 운전점에서도 실제 회전자 저항을 정확하게 추정함을 보여주었다. 하지만, 자속이 변화하는 동작환경에서의 CQDM애 기반 회전자 저항 추정기의 성능은 검토된 적이 없으며 그의 성능은 의문이다. 따라서, 본 연구에서는 자속이 많이 변화하는 MTPA 제어기 기반 유도전동기 드라이브에서 CQDM에 기반한 회전자 저항 추정기의 성능을 검토하였으며 AQDM에 기반한 추정기와 비교하였다. AQDM에 기반한 추정기와는 달리, CQDM에 기반한 추정기는 실제 저항치보다 낮게 추정할 뿐만 아니라 여러 운전조건변화시마다 추정한 값에서 실제 존재할 수 없는 급격한 굴곡이 존재함을 실험 결과에서 확인하였다.

말뚝의 인발저항에 대한 지중 구속압 영향 분석을 위한 실내모형실험 (Effect of Ground Confine Pressure on Pullout Resistance of Piles Using Model Experiment)

  • 유승경;홍기권
    • 한국지반신소재학회논문집
    • /
    • 제22권4호
    • /
    • pp.27-34
    • /
    • 2023
  • 본 연구에서는 말뚝에 작용하는 구속압과 지반의 세립분 함유율을 고려한 말뚝 인발실험을 실시하였다. 그리고 실험 결과를 이용하여 말뚝의 인발저항에 미치는 지중 구속압의 영향을 분석하여 인발저항정수를 고찰하였다. 인발실험 결과, 모형지반의 세립분 함유율과 구속압의 크기에 관계없이 약 7mm~9mm의 인발변위에서 최대인발저항력이 발생되었다. 말뚝의 최대인발저항력은 모형지반의 세립분 함유율이 증가할수록 감소하였고, 이러한 경향은 구속압이 클수록 현격하게 나타났다. 말뚝인발실험 결과의 신뢰성을 검토하기 위해 인발저항력을 이론식으로 산정해 실험결과와 비교한 결과, 모든 구속압 조건에서 세립분 함유율 증가에 따라 실험값과 이론값 모두 동일하게 인발저항력이 감소하는 경향을 보였다. 인발저항정수에 대한 분석 결과, 말뚝과 지반의 경계에서 발생하는 인발저항력에 있어서 주변 지반의 세립분 함유율이 증가할수록 경계면 마찰각보다 부착력의 영향이 커지는 것을 확인하였다.

자동차 보호용 수계형 아크릴 점착제의 내성 (Resistant Properties of Water-Borne Acrylic Pressure Sensitive Adhesives for Automobile Protection)

  • 함현식;곽윤철;황재영;안성환;김명수;박홍수;윤철훈;성기천
    • 한국응용과학기술학회지
    • /
    • 제22권3호
    • /
    • pp.289-297
    • /
    • 2005
  • In order to improve resistant properties of water-borne acrylic pressure sensitive adhesives(PSAs) for automobiles, this study was carried out. Removable PSAs for automobiles were synthesized by emulsion polymerization of monomers, n-butyl acrylate(BA), n-butyl methacrylate(BMA), acrylonitrile(AN), acrylic acid(AA) and 2-hydroxyethyl methacrylate(2-HEMA), and AA and 2-HEMA could act as functional monomers for crosslink. Emulsion polymerization was carried out in a semi-batch type reactor. Water resistance, heat resistance, acid resistance, alkali resistance and smoke resistance were examined. As a result, water resistance increased with the amount of BMA, however, the effect of BMA content on the water resistance was insignificant at a range of over 14 wt%. The water resistance also increased with the amount of functional monomers, AA and 2-HEMA. The prepared PSAs satisfied all the standard for automobiles except heat resistance. However, the heat resistance comes nearly up to the standard. Also, acid resistance, alkali resistance and smoke resistance of the prepared PSAs satisfied with the standard.

하한지지력이 현장타설말뚝의 저항계수에 미치는 영향 (Effects of Lower-Bound Resistances on Resistance Factors Calibration for Drilled Shafts)

  • 김석중;박재현;김명모
    • 한국지반공학회논문집
    • /
    • 제30권11호
    • /
    • pp.51-60
    • /
    • 2014
  • 한계상태설계법의 하나인 하중저항계수설계법의 이용이 북미를 중심으로 점차 확산되고 있는 가운데, 국내에서도 이에 대한 연구가 활발하게 진행되고 있다. 하지만, 국내에서는 자료가 충분히 확보되지 못하여 기초구조물의 설계에 AASHTO에서 제안한 저항계수를 설계에 이용하고 있다. AASHTO에서 제안하고 있는 저항계수는 북미에 보편적으로 존재하는 암반조건을 이용하여 결정된 저항계수로서, 국내지반에 적합한 저항계수를 독자적으로 개발할 필요가 있다. 또한, 기존의 신뢰성 분석 기법에서는 하중저항계수를 결정할 때, 저항의 최소값을 0으로 가정하는 일반적인 대수정규 분포를 이용하기 때문에, 이로부터 산정한 파괴확률은 비현실적이라고 알려져 있다. 따라서, 이를 개선하기 위하여 저항계수를 산정할 때 저항의 하한값이 0이 아닌, 현실적으로 의미가 있는 하한지지력을 이용하는 방법이 최근에 고안되었다. 따라서, 본 연구에서는 국내에서 수행된 현장타설말뚝 13본에 대한 재하시험자료를 면밀히 분석하여 저항계수를 산정한 다음, 현실성 있는 하한지지력을 산정하여 저항계수 값을 보정하였다. 그 결과, 목표신뢰도지수가 3.0일때, 기존의 신뢰성 분석 기법으로부터 산정된 주면저항계수와 선단저항계수는 각각 0.13-0.32, 0.19-0.29 이었으며, 하한지지력을 보정하여 구한 주면저항계수와 선단저항계수는 Carter & Kulhawy 공식의 경우 각각 8%와 13% 증가하였다.

봉형접지극 접지저항 향상을 위한 기계화 시공 연구 (A Study on the Mechanization of the Grounding Rod Earth Construction Method to Improve the Grounding Resistance Characteristics)

  • 박중신;조성제;안인석
    • 조명전기설비학회논문지
    • /
    • 제23권10호
    • /
    • pp.143-150
    • /
    • 2009
  • 봉형접지극은 타 접지전극 형태에 비해 쉬운 시공성으로 국 내외적으로 배전계통에 보편적으로 사용하고 있는 접지극 형태이다. 따라서 보다 나은 봉형접지극의 시공성 향상을 위해 형태 변형, 형상 개량, 재질 개선 등 많은 연구가 진행되고 있다. 그러나 접지공사는 다양한 토질을 대상으로 이루어지기 때문에 봉형접지극 자체에 대한 개선으로는 시공성 향상에 한계가 있다. 따라서 본 연구에서는 봉형접지극의 직렬 및 병렬 시공을 기계화(중공스크루로드 이용)함으로써 소정의 접지저항값을 효과적으로 확보할 수 있는 공법에 관한 연구이다. 본 연구 결과를 축약하면 같은 조건하(동일한 대지저항율, 동일한 접지동봉 개수, 동일한 직렬 또는 병렬 시공, 동일한 접지저항저감제, 물 공급)에서 현재 적용하고 있는 항타(심타)공법과 기계화공법에 대하여 새롭게 제시된 기계화공법으로 인한 접지저항값의 저감 효과를 비교하였다. 제안된 기계화공법이 항타공법에 비해 비교적 안정된 접지저항 저감 효과를 얻었다.

Immediate Effects of Appling Resistance in the Bridge Exercise on Muscle Activity in the Trunk and Lower Extremities

  • Sun Min Kim;Gku Bin Oh;Gang Mi Youn;Ji Hyun Kim;Ki Hun Cho
    • 대한물리치료과학회지
    • /
    • 제30권3호
    • /
    • pp.1-13
    • /
    • 2023
  • Background: The bridge exercise prevents repeated damage to the tissues around the spine by reducing stimulus transmission to the ligaments and joint capsules, thereby alleviating back pain. It also contributes to strengthening the muscles of the lower extremities. Design: A Single Subject experience design. Methods: This study was conducted on 28 healthy adults in their 20s to 30s and conducted at St. Mary's Hospital in C City from May to July 2021. Four types of bridge exercise were performed in this study: the normal bridge exercise and bridge exercises with 0.5%, 1%, or 1.5% body weight resistance applied on the pelvis through manual resistance during the bridge exercise and to determine the effect of resistance applied in the bridge exercise on the activation of the trunk and lower extremities muscles. Results:This study showed that the muscle activity of the trunk and lower extremities improved significantly in response to stronger resistance when manual resistance equivalent to 0.5%, 1%, or 1.5% of body weight was applied during the bridge exercise compared to when the normal bridge exercise was performed. Conclusion: This study shows that manual resistance can be applied as an effective method of bridge exercise since muscle activity in the trunk and lower extremities increases when manual resistance causing isometric contraction is applied.

A study on the correlation between vaginal conductivity and estrus in Hanwoo (Bos taurus coreanae) cows

  • Junkoo Yi;Jinyeon Park;Jaejung Ha;Daejung Yu;Woo-Sung Kwon;Daehyun Kim
    • 한국동물생명공학회지
    • /
    • 제38권4호
    • /
    • pp.263-267
    • /
    • 2023
  • Background: Estrus in cows can be detected through vaginal electrical resistance or conductivity. However, there are no studies measuring vaginal electrical resistance in Hanwoo cows. This study aims to measure the vaginal electrical resistance value in Hanwoo cows and compare it with estrus and ovulation. Methods: Vaginal electrical resistance values of 73 Hanwoo cows were measured before and after estrus at the Gyeongsangbuk-do Livestock Research Institute. Measurements were taken on days -6, -3, -2, -1, 0, 1, 2, 3, and 6 of artificial insemination. Large follicles and ovulation were confirmed using transvaginal ultrasonography. Results: The vaginal electrical resistance averaged 225.6 ± 6.3 Ω days before the artificial insemination date, decreasing until the day of artificial insemination. The average vaginal electrical resistance was 163.7 ± 4.6 Ω on the date of artificial insemination, and 188.8 ± 4.3 Ω one day after artificial insemination, when large follicles were observed. In addition, on the 6th day after artificial insemination, the vaginal electrical resistance averaged 231.4 ± 5.5, which was similar to the 6th day before artificial insemination (222.5 ± 6.3). Transvaginal ultrasonography showed that most of the cows ovulated one day after artificial insemination. Conclusions: The accuracy of estrus is high if the vaginal electrical resistance is measured for cows with confirmed estrus, making is a potentially useful for determining the timing of artificial insemination.

플로팅 아일랜드 구조의 전력 MOSFET의 전기적 특성 분석 (Analysis of The Electrical Characteristics of Power MOSFET with Floating Island)

  • 강이구
    • 한국전기전자재료학회논문지
    • /
    • 제29권4호
    • /
    • pp.199-204
    • /
    • 2016
  • This paper was proposed floating island power MOSFET for lowering on state resistance and the proposed device was maintained 600 V breakdown voltage. The electrical field distribution of floating island power MOSFET was dispersed to floating island between P-base and N-drift. Therefore, we designed higher doping concentration of drift region than doping concentration of planar type power MOSFET. And so we obtain the lower on resistance than on resistance of planar type power MOSFET. We needed the higher doping concentration of floating island than doping concentration of drift region and needed width and depth of floating island for formation of floating island region. We obtained the optimal parameters. The depth of floating island was $32{\mu}m$. The doping concentration of floating island was $5{\times}1,012cm^2$. And the width of floating island was $3{\mu}m$. As a result of designing the floating island power MOSFET, we obtained 723 V breakdown voltage and $0.108{\Omega}cm^2$ on resistance. When we compared to planar power MOSFET, the on resistance was lowered 24.5% than its of planar power MOSFET. The proposed device will be used to electrical vehicle and renewable industry.

ERP 도입 전 구성원의 저항 (A Study on Users' Resistance toward ERP in the Pre-adoption Context)

  • 박재성;조용수;고준
    • Asia pacific journal of information systems
    • /
    • 제19권4호
    • /
    • pp.77-100
    • /
    • 2009
  • Information Systems (IS) is an essential tool for any organizations. The last decade has seen an increasing body of knowledge on IS usage. Yet, IS often fails because of its misuse or non-use. In general, decisions regarding the selection of a system, which involve the evaluation of many IS vendors and an enormous initial investment, are made not through the consensus of employees but through the top-down decision making by top managers. In situations where the selected system does not satisfy the needs of the employees, the forced use of the selected IS will only result in their resistance to it. Many organizations have been either integrating dispersed legacy systems such as archipelago or adopting a new ERP (Enterprise Resource Planning) system to enhance employee efficiency. This study examines user resistance prior to the adoption of the selected IS or ERP system. As such, this study identifies the importance of managing organizational resistance that may appear in the pre-adoption context of an integrated IS or ERP system, explores key factors influencing user resistance, and investigates how prior experience with other integrated IS or ERP systems may change the relationship between the affecting factors and user resistance. This study focuses on organizational members' resistance and the affecting factors in the pre-adoption context of an integrated IS or ERP system rather than in the context of an ERP adoption itself or ERP post-adoption. Based on prior literature, this study proposes a research model that considers six key variables, including perceived benefit, system complexity, fitness with existing tasks, attitude toward change, the psychological reactance trait, and perceived IT competence. They are considered as independent variables affecting user resistance toward an integrated IS or ERP system. This study also introduces the concept of prior experience (i.e., whether a user has prior experience with an integrated IS or ERP system) as a moderating variable to examine the impact of perceived benefit and attitude toward change in user resistance. As such, we propose eight hypotheses with respect to the model. For the empirical validation of the hypotheses, we developed relevant instruments for each research variable based on prior literature and surveyed 95 professional researchers and the administrative staff of the Korea Photonics Technology Institute (KOPTI). We examined the organizational characteristics of KOPTI, the reasons behind their adoption of an ERP system, process changes caused by the introduction of the system, and employees' resistance/attitude toward the system at the time of the introduction. The results of the multiple regression analysis suggest that, among the six variables, perceived benefit, complexity, attitude toward change, and the psychological reactance trait significantly influence user resistance. These results further suggest that top management should manage the psychological states of their employees in order to minimize their resistance to the forced IS, even in the new system pre-adoption context. In addition, the moderating variable-prior experience was found to change the strength of the relationship between attitude toward change and system resistance. That is, the effect of attitude toward change in user resistance was significantly stronger in those with prior experience than those with no prior experience. This result implies that those with prior experience should be identified and provided with some type of attitude training or change management programs to minimize their resistance to the adoption of a system. This study contributes to the IS field by providing practical implications for IS practitioners. This study identifies system resistance stimuli of users, focusing on the pre-adoption context in a forced ERP system environment. We have empirically validated the proposed research model by examining several significant factors affecting user resistance against the adoption of an ERP system. In particular, we find a clear and significant role of the moderating variable, prior ERP usage experience, in the relationship between the affecting factors and user resistance. The results of the study suggest the importance of appropriately managing the factors that affect user resistance in organizations that plan to introduce a new ERP system or integrate legacy systems. Moreover, this study offers to practitioners several specific strategies (in particular, the categorization of users by their prior usage experience) for alleviating the resistant behaviors of users in the process of the ERP adoption before a system becomes available to them. Despite the valuable contributions of this study, there are also some limitations which will be discussed in this paper to make the study more complete and consistent.

하악의 위치 변화가 기도저항에 미치는 영향 (Effect of Mandibular Reposition on Airway Resistance)

  • 최재갑;정태훈
    • Journal of Oral Medicine and Pain
    • /
    • 제23권1호
    • /
    • pp.65-73
    • /
    • 1998
  • This study evaluated whether substantial airflow resistance changes occurred by changing jaw position in normal and snoring subjects. A case-control design was utilized to assess group differences. Subjects included 11 snoring patients and 10 non-snoring subjects. Airway resistance was assessed using a whole body plethysmograph. Subjects in this study had their mouth opening standardized to a position of 7 mm of vertical separation and the resistance was measured under the following conditions; normal jaw position and 2/3 maximum protrusive jaw position. The results were as follows : 1. The airway resistance was higher in snoring group than in non-snoring group. 2. Both groups had a significant decrease in their airflow resistance upon jaw protrusion. In conclusion, these data document that airflow resistance can be significantly influenced by jaw positioning. Moving the jaw in a protrusive position produced reduction of resistance.

  • PDF