• Korean Journal of Environmental Agriculture
• /
• v.32 no.4
• /
• pp.273-278
• /
• 2013

BACKGROUND: Total petroleum hydrocarbons (TPH), which are main materials of soil contamination by oil, are a term used for any mixture of hydrocarbons. Korea Ministry of Environment established the maximum permissible level of TPH in farmland by 500 mg/kg, and reported that the TPH level of soil in 266 installation such as gas station, transport company, and military unit ranged from 1,356 to 55,117 mg/kg and were much higher than the maximum permissible level in 2011. METHODS AND RESULTS: To determine the effect of TPH on crops, we investigated the effect of gasoline, kerosene, and diesel on the germination and radicle growth of mainly consumed crops. The germination rates of control in investigated all crops ranged from 80.0-100%. The germination and radicle growth in majority of investigated crops were not inhibited even at 2,500 mg/L. However, germination in onion, leek, and green perilla and radicle growth in leek, rape, tomato, and green perilla were significantly inhibited by increasing concentrations of gasoline, kerosene and diesel treatment. Germination and radicle growth inhibition of green perilla by kerosene and diesel were the highest, the percent inhibition at the 500 mg/L were 100 and 98.6%, 100 and 88.2%, respectively. 50% inhibition of germination in green perilla by kerosene and diesel were 39.96 and 29.87 mg/L, and 50% inhibition of radicle growth were 52.76 and 177.96 mg/L, respectively. Conclusion(s): These results suggest the possibility that the maximum permissible level of TPH might to be established general level with exception by crops.

• Economic and Environmental Geology
• /
• v.38 no.1
• /
• pp.1-22
• /
• 2005

Carbon dioxide ($CO_2$) is the greatest contributor among the major greenhouse gases covered by the Kyoto Protocol. Therefore, substantial efforts for the control and reduction of $CO_2$ emissions, including increased efficiency of fossil fuel energy usage, development of energy sources with lower carbon content, and increased reliability on alternative energy sources, are being performed worldwide. However, development and industrial application of $CO_2$ sequestration techniques are needed to meet the requirements of the Kyoto Protocol. Among the $CO_2$ sequestration methods developed, geological sequestration methods such as the storage in deep aquifers, deep coal seams and oil and gas reservoirs and the mineral carbonation is considered most favorable because of its stability and environmental effectiveness. In this review, geochemical concepts and technologic development of geologic sequestration technology, especially the storage in deep aquifers and the mineral carbonation, are discussed. The weakness and strengths for each of geologic sequestration methods, are also reviewed.

• Microbiology and Biotechnology Letters
• /
• v.49 no.2
• /
• pp.225-238
• /
• 2021

CH₄-oxidizing and N₂O-reducing bacterial consortia were enriched from the rhizosphere soils of maize (Zea mays) and tall fescue (Festuca arundinacea). Illumina MiSeq sequencing analysis was performed to comparatively analyze the bacterial communities of the consortia with those of the rhizosphere soils. Additionally, the effect of root exudate on CH₄ oxidation and N₂O reduction activities of the microbes was evaluated. Although the inoculum sources varied, the CH₄-oxidizing and N₂O-reducing consortia derived from maize and tall fescue were similar. The predominant methanotrophs in the CH₄-oxidizing consortia were Methylosarcina, Methylococcus, and Methylocystis. Among the N₂O-reducing consortia, the representative N₂O-reducing bacteria were Cloacibacterium, Azonexus, and Klebsiella. The N₂O reduction rate of the N₂O-reducing consortium from maize rhizosphere and tall fescue rhizosphere increased by 1.6 and 2.7 times with the addition of maize and tall fescue root exudates, respectively. The CH₄ oxidization activity of the CH₄-oxidizing consortia did not increase with the addition of root exudates. The CH₄-oxidizing and N₂O-reducing consortia can be used as promising bioresources to mitigate non-CO₂ greenhouse gas emissions during remediation of oil-contaminated soils.

• International Journal of Computer Science & Network Security
• /
• v.22 no.9
• /
• pp.75-82
• /
• 2022

Analyzing the psychological and pedagogical literature, we found the researchers' interest in the problem posed. The concept of "culture of professional communication» is considered, which is interpreted as the level of realization of creative abilities, exchange of messages, organization of mutual understanding, mutual knowledge in the process of professionally directed interaction between subjects, in which interpersonal relationships arise, manifest and form. The concept of "professional culture of communication of a teacher" is interpreted. The motives that are socially significant in the professional communication of the teacher are highlighted. The necessity of forming a culture of professional communication among students, in particular by means of information technologies in the present, is clarified. The interactive component of professional communication is considered. The types of interactions between people in everyday life (ritual and entertainment interaction, joint purposeful activity, no interaction, game and interpersonal interaction) are identified. Traditional and specific forms and methods of teaching are written out. All interactive technologies carried out by means of information technologies are conventionally divided into four groups, depending on the form of educational activity appropriate for their use (pair (work of the subject with the teacher or peers one on one by means of Information Technologies); frontal (the teacher simultaneously teaches a group of subjects by means of Information Technologies); group or cooperative (all subjects teach each other by means of Information Technologies); individual (independent work of the subject using Information Technologies)). In the higher education institution, future specialists should learn knowledge, acquire skills on the basic rules of the culture of professional communication and methods of interaction and their effective use, which is possible with the use of Information Technologies. Recommendations for optimal professional communication have been developed that help you express your thoughts easily and beautifully, and conduct a dialogue in a relaxed and harmonious way.

• Geophysics and Geophysical Exploration
• /
• v.18 no.2
• /
• pp.54-63
• /
• 2015

Petrophysical parameters such as porosity and fluid saturation which provide useful information for reservoir characterization could be estimated by rock physics model (RPM) using seismic velocity and resistivity. Therefore, accurate P-wave velocity and resistivity information have to be obtained for successful estimation of the petrophysical parameters. Compared with the individual inversion of electromagnetic (EM) or seismic data, the joint inversion using both EM and seismic data together can reduce the uncertainty and gives the opportunity to use the advantages of each data. Thus, more reliable petrophysical properties could be estimated through the joint inversion. In this paper, for the successful estimation of petrophysical parameters, we proposed an effective method which applies a grid-search method to find the porosity and fluid saturation. The relations of porosity and fluid saturation with P-wave velocity and resistivity were expressed by using RPM and the improved resistivity distribution used to this study was obtained by joint inversion of seismic and EM data. When the proposed method was applied to the synthetic data which were simulated for subsea reservoir exploration, reliable petrophysical parameters were obtained. The results indicate that the proposed method can be applied for detecting a reservoir and calculating the accurate oil and gas reserves.

• International Commerce and Information Review
• /
• v.15 no.3
• /
• pp.313-332
• /
• 2013

Large tundra of the Russian Empire, has rich resources and science and technology, and a huge domestic market potential is rapidly changing. Based on the abundant energy resources such as oil, gas, and minerals, as foreign trade is active, the huge capital is moving. And commitment the active SOC by improving laws and regulations and changes in the structure of the Russian economy. One of them pushed the WTO since 1993, 19 years to see fruition join the WTO (World Trade Organization). As the official entry into force August 22, Russia, July 10, 2012, Congress passed the treaty after joining the WTO and of the 156th WTO member countries, was officially join. As the WTO, Russia has the world's 11th-largest economy in the steel tariffs from 30% to 15% are exported to Russia, South Korea Car TV parts from 10% to 0%, reduced from 20% to 5% Korean export companies to export to Russia, etc., is expected to become the new land of opportunity. Russia hopes the changes improve the investment environment, the service industry, manufacturing revitalization the macroeconomic sectors of the economy through the WTO, and forecast, but the consumption increased revenue due to tariff cuts, falling import prices and the real economy, and weak manufacturing base. On the one hand, the perspective of concern. In conclusion, Russia joining the WTO, and the feed to improve the fairness and transparency of the market opening, the Russian advance in Korean companies be facilitated and strong complementary cooperation, especially in manufacturing is expected. In this paper, after Russia joining the WTO, trade liberalization, and ready for a new era of economic cooperation between Korea and Russia, at the point of expanding openness to propose strategies to analyze the problems of Korean companies during the Russian advance.

• Journal of Ocean Engineering and Technology
• /
• v.28 no.4
• /
• pp.356-362
• /
• 2014

Wear and corrosion of the engine parts surrounded with combustion chamber is more serious compared to the other parts of the engine because temperature of the exhaust gas in a combustion chamber is getting higher and higher with increasing of using the heavy oil of low quality. Therefore, an optimum repair weldment as well as an available choice of the base metal for these parts are very important to prolong their lifetime in a economical point of view. It reported that there was an experimental result for repair weldment on the forged steel which would be generally used with piston crown material, however, it is considered that there is no study for the repair weldment on the cast steel of piston crown material. In this study, four types of electrodes such as 1.25Cr-0.5Mo, 0.5Mo Inconel 625 and 718 were welded with SMAW and GTAW methods on the cast steel which would be generally used with piston crown material. And the corrosion properties of weld metal, heat affected zone and base metal were investigated using electrochemical methods such as measurement of corrosion potential, anodic polarization curves, cyclic voltammogram and impedance etc. in 35% $H_2SO_4$ solution. In the cases of Inconel 625, 718, the weld metals and base metals exhibited the best and worst corrosion resistance respectively, however, 1.25Cr-0.5Mo and 0.5Mo indicated that corrosion resistance of the base metal was better than the weld metal. And the weld metal welded with electrodes of Inconel 625 revealed the best corrosion resistance among the electrodes, and Inconel 718 followed the Inconel 625. Hardness relatively also indicated higher value in the weld metal compared to heat affected zone and base metal. In particular, Inconel 718 indicated the highest value of hardness compared to other electrodes in the heat affected zone.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.40 no.11
• /
• pp.1562-1568
• /
• 2011

We studied the amounts of trans fatty acids and saturated fatty acids in child-favored foods. Confectioneries, breads, donuts and hamburgers were included in this study. The total fatty acid content and the amount of each type of fatty acid were determined by gas chromatography with a flame-ionized detector. Confectioneries were shown to have the highest content of crude fat. The mean content was 24.2${\pm}$6.9 (range: 4.6~41.1) g/100 g food. The mean content of crude fat in donuts, bread and hamburgers was 23.9${\pm}$5.8 (range: 14.1~39.5) g/100 g food, 15.7${\pm}$7.9 (range: 1.4~30.0) g/100 g food, and 9.5${\pm}$3.4 (range: 4.5~18.5) g/100 g food, respectively. Bread had the most trans fatty acids at 1.3 g/100 g food. This result inferred that manufacturers have tried to reduce the trans fat content. The mean content of saturated fatty acids in confectioneries, donuts, bread, and hamburgers was 11.6${\pm}$4.8 (range: 2.0~22.7) g/100 g food, 11.2${\pm}$4.0 (range: 4.8~23.2) g/100 g food, 6.9${\pm}$4.1 (range: 0.6~15.4) g/100 g food, 3.0${\pm}$1.0 (range: 1.0~5.8) g/100 g food, respectively. This content depended on crude fat. The composition of fatty acids varied according to the oil and fat used in the manufacturing process of each food, and the natural content. Foods that were fried in vegetable oil tended to be especially low in saturated fat.

• Journal of Advanced Marine Engineering and Technology
• /
• v.8 no.1
• /
• pp.17-36
• /
• 1984

Since 1973, the competition on the development of fuel saving type internal combustion engines has become severe by the two times oil shock, and new type engines are reported every several months. Whenever these new type engines are developed, new designs are required and they will be offered in the market after performing the endurance test for a long time. But the engine market is faced with a heavy burden of finance, as the developing of a new engine requires tremendous expenses. For this reason, the computer simulation method has been lately developed to cope with it. The computer simulation method can be available to perform the reasonable research works by the theoretical analysis before carrying out practical experiments. With these processes, the developing expenses are cut down and the period of development is curtailed. The object of this study is the development of simulation computer program for the small naturally aspirated four-stroke diesel engine which is intended to product by the original design of our country. The process of simulation is firstly investigated for the ideal engine cycle, and secondly for the real engine cycle. In the ideal engine cycle, each step of the cycle is simulated by the energy balance according to the first law of thermodynamics, and then the engine performance is calculated. In the real cycle imulation program, the injection rate, the preparation rate and the combustion rate of fuel and the heat transfer through the wall of combustion chamber are considered. In this case, the injection rate is supposed as constant through the crank angle interval of injection and the combustion rate is calculated by the Whitehouse-Way equation and the heat transfer is calculated by the Annand's equation. The simulated values are compared with measured values of the YANMAR NS90(C) engine and Mitsubishi 4D30 engine, and the following conclusions are drawn. 1. The heat loss by the exhaust gas is well agree with each other in the lower load, but the measured value is greater than the calculated value in the higher load. The maximum error rate is about 15% in the full load. 2. The calculated quantity of heat transfer to the cooling water is greater than the measured value. The maximum error rate is about 11.8%. 3. The mean effective pressure, the fuel consumption, the power and the torque are well agree with each other. The maximum error is occurred in the fuel consumption, and its error rate is about 7%. From the above remarks, it may be concluded that the prediction of the engine performance is possibly by using the developed program, although the program needs to reform by adding the simulation of intake and exhaust process and assumping more reliable mechanical efficiency, volumetric efficiency, preparation rate and combustion rate.

• Geomechanics and Engineering
• /
• v.20 no.6
• /
• pp.537-546
• /
• 2020

Oil and natural gas reserves have been recognised abundantly in clayey rich rock formations in deep costal reservoirs. It is necessary to understand the sedimentary history of those reservoir rocks to well explore these natural resources. This work designs a group of laboratory experiments to mimic the physical process of the sedimentary clay-rich rock formation. It presents characterisation results of the physical properties of the artificial clayey rocks synthesized from illite clay, quartz sand and brine water by high-pressure consolidation tests. Special focus is given on the effects of illite clay content and high-stress consolidation on the physical properties. Multi-step loaded consolidation experiments were carried out with stress up to 35 MPa on mixtures constituting of the illite clay, quartz sand and brine water with five initial illite clay contents (w=85%, 70%, 55%, 40% and 25%). Compressibility and void ratio were characterised throughout the physical compaction process of the mixtures constituting of five illite clay contents and their water permeability was measured as well. Results show that the applied stress induces a great reduction of clayey rock void ratio. Illite clay contents has a significant influence on the compressibility, void ratio and the permeability of the physically synthesized clayey rocks. There is a critical illite clay content w=70% that induces the minimum void ratio in the physically synthesised clayey rocks. The SEM study indicates, in the high-pressure synthesised clayey rocks with high illite clay contents, the illite clay minerals are located in layers and serve as the material matrix, and the quartz minerals fill in the inter-mineral pores or are embedded in the illite clay matrix. The arrangements of the minerals in microscale originate the structural anisotropy of the high-pressure synthesised clayey rock. The test findings can give an intuitive physical understanding of the deep-buried clayey rock basins in energy reservoirs.