• 제목/요약/키워드: Oil Rheology

검색결과 47건 처리시간 0.028초

Estimation of the Lubricating Oil Rheology at High Pressure Based on Phase Diagram

  • Rahman, Md.Z.;Ohno, N.
    • 한국윤활학회:학술대회논문집
    • /
    • 한국윤활학회 2002년도 proceedings of the second asia international conference on tribology
    • /
    • pp.85-86
    • /
    • 2002
  • For rheology investigation of lubricating oils, first phase diagrams were made from determined free volume based on density measurements and the temperature-pressure relation was estimated using the expansion coefficient of free volume and the temperature-pressure relation of the viscoelastic transition point. Next, the authors proposed the density-pressure-temperature relation and the viscosity-pressure-temperature relation of the tested oils based on the free volume and the phase diagrams. Moreover, it was shown that the Ehrenfest equation or the gradient of the phase diagram is closely related to the expansion coefficient of free volume.

  • PDF

솔잎향미유 처리에 의한 건면의 품질개선 효과 (Quality improving effect of dries noodle according to treatment of pine needle seasoning oil)

  • 손무호
    • 한국조리학회지
    • /
    • 제7권2호
    • /
    • pp.181-194
    • /
    • 2001
  • Autoclaving법으로 제조한 솔잎향미유(pine needle seasoning oil, PNSO) 0~3%(w/w)와 유화제를 2:1(w/w)로 혼합하여 식염수에 용해시킨 후 이를 밀가루와 반죽하여 건면을 제조하였다. PNSO 처리량이 증가할수록 수분흡수율, 부피팽창율, 고형분 용출율은 감소하였으며, 조리시간은 연장 되는 것으로 나타나 적정 처리량은 2~3%(w/w) 수준인 것으로 판명되었다. 한편, 관능검사 결과 PNSO의 처리에 따라 조리면에서 솔잎 고유의 녹색이 나타났으며, 조리면의 표면이 매끈하였고, 쫄깃쫄깃한 rheology 및 texture가 크게 개선되었다. PNSO 2%(w/w) 이상 처리군에서는 조리 후 20~30분이 경과하여도 조리면의 쫄깃쫄깃한 특성이 그대로 유지되어 식당, 단체급식소 등의 대량 취식용으로도 적합할 것으로 판단되었다.

  • PDF

Rheology of Decamethylceclopentasiloxane (cyclomethicone) W/O Emulsion System

  • Choi, Min-Hyung;Jeong, So-Ra;Nam, Sang-In;Shim, Sang-Eun;Chang, Yoon-Ho
    • Macromolecular Research
    • /
    • 제17권12호
    • /
    • pp.943-949
    • /
    • 2009
  • A highly dispersed W/O emulsion of silicone oil (cyclomethicone)/water system was prepared with a nonionic surfactant. The surface and interfacial tension between the oil and water were characterized in terms of the droplet size distribution and viscosity change of the emulsion. When the dispersed phase concentration was relatively high, the viscosity of the emulsion was rapidly increased and the droplet size of the emulsion was decreased. The rheological behavior of the emulsion system showed non-Newtonian and shear thinning phenomena depending upon the content of the dispersed phase. The droplet size of the emulsion was decreased with increasing surfactant content and water concentration. The relative viscosity of the emulsion was better predicted with the Choi-Schowalter model than with the Taylor model. The value of the complex modulus increased with increasing surfactant concentration. The linear viscoelastic region was expanded with a dispersed phase concentration. According to the change in the viscosity, the behavior was classified into three distinct regions: [I] linear viscoelastic, [II] partially viscoelastic, and [III] viscous. The creep/recovery behaviors in each region were characterized.

Stability of High Internal Phase Emulsions

  • Park, C.I.;Cho, W.G.
    • 대한화장품학회지
    • /
    • 제25권4호
    • /
    • pp.65-74
    • /
    • 1999
  • We have studied the stability of W/O high internal phase emulsions(HIPE) containing water, cetyl dimethicone copolyol and oils varying magnesium sulfate in the range 0 to 0.5 wt% and oil polarities, respectively. The rheological consistency was mainly destroyed by the coalescence of the deformed water droplets. The greater the increase of complex modulus was, the less coalescence occurred and the more consistent the concentrated emulsions were. The increasing pattern of complex modulus versus volume fraction has been explained with the resistance to coalescence of the deformed interfacial film of water droplets in concentrated W/O emulsion. The stability is dependent on: (i) the choice of the oil is important, the requirements coincide with the requirements for the formation of the rigid liquid crystalline phases; and (ii) addition of salts the aqueous phase opposes the instability due to coalescence. Increasing the salt concentration increases the refractive index of the aqueous phase. It lowers the difference in the refractive index between the oil and aqueous phases. This decreases the attraction between the water domains, thus increasing the stability.

  • PDF

Stability of High Internal Phase Emulsions

  • Park, C-I.;W-G. Cho
    • 대한화장품학회:학술대회논문집
    • /
    • 대한화장품학회 1999년도 IFSCC . ASCS 학술대회 발표 논문
    • /
    • pp.65-74
    • /
    • 1999
  • We have studied the stability of W/O high internal phase emulsions(HIPE) containing water, cetyl dimethicone copolyol and oils varying magnesium sulfate in the range 0 to 0.5wt% and oil polarities, respectively. The rheological consistency was mainly destroyed by the coalescence of the deformed water droplets. The greater the increase of concentrated modulus was, the less coalescence occurred and the more consistent the concentrated emulsions were. The increasing pattern of complex modulus versus volume fraction has been explained with the resistance to coalescence of the deformed interfacial film of water droplets in concentrated W/O emulsion. The stability is dependent on: (i) the choice of the oil is important, the requirements coincide with the requirements for the formation of the rigid liquid crystalline phases :5; and (ii) addition of salts the aqueous phase opposes the instability due to coalescence:. Increasing the salt concentration increases the refractive index of the aqueous phase. It lowers the difference in the refractive index between the oil and aqueous phases. This decreases the attraction between the water domains, thus increasing the stability.

  • PDF

Processing parallel-disk viscometry data in the presence of wall slip

  • Leong, Yee-Kwong;Campbell, Graeme R.;Yeow, Y. Leong;Withers, John W.
    • Korea-Australia Rheology Journal
    • /
    • 제20권2호
    • /
    • pp.51-58
    • /
    • 2008
  • This paper describes a two-step Tikhonov regularization procedure for converting the steady shear data generated by parallel-disk viscometers, in the presence of wall slip, into a shear stress-shear rate function and a wall shear stress-slip velocity functions. If the material under test has a yield stress or a critical wall shear stress below which no slip is observed the method will also provide an estimate of these stresses. Amplification of measurement noise is kept under control by the introduction of two separate regularization parameters and Generalized Cross Validation is used to guide the selection of these parameters. The performance of this procedure is demonstrated by applying it to the parallel disk data of an oil-in-water emulsion, of a foam and of a mayonnaise.

Effect of rheological properties on chemical absorption of carbon dioxide with MEA

  • Park, Sang-Wook;Kim, Tae-Young;Park, Byoung-Sik;Lee, Jae-Wook
    • Korea-Australia Rheology Journal
    • /
    • 제16권1호
    • /
    • pp.35-45
    • /
    • 2004
  • Rates of chemical absorption of $CO_2$ in water-in-oil (w/o) emulsion were measured in a flat-stirred vessel at $25^{\circ}C$. The w/o emulsion was composed of aqueous monoethanolamine (MEA) droplets as a dispersed phase and non-Newtonian viscoelastic benzene solutions of polybutene (PB) and polyisobutylene (PIB) as a continuous phase. The liquid-side-mass transfer coefficient ($k_L$) was obtained from the dimensionless empirical equation containing Deborah number expressed as the properties of pseudoplasticity of the non-Newtonian liquid. $k_L$ was used to estimate the enhancement factor due to chemical reaction between $CO_2$ and MEA in the aqueous phase. PIB with elastic property of non-Newtonian liquid made the rate of chemical absorption of $CO_2$ accelerate compared with Newtonian liquid.

Role of surfactant on damping performance of polyaniline based electrorheological suspension

  • Kim, Ji-Woo;Kim, Chul-Am;Choi, Hyoung-Jin;Choi, Seung-Bok
    • Korea-Australia Rheology Journal
    • /
    • 제18권1호
    • /
    • pp.25-30
    • /
    • 2006
  • To enhance the stability of dispersed polyaniline (PANI) particles in a silicone oil system, a nonionic surfactant was adopted, and its effect on the electrorheological (ER) performance was investigated under an applied electric field. In the presence of a nonionic surfactant, the PANI based ER fluid exhibited not only an improved sedimentation stability based on the estimated sedimentation ratio but also an enhanced maximum yield stress behavior. Furthermore, the surfactant added ER suspension was applied to an ER damper system, and its damping performance was compared with the ER suspension without a surfactant.

반응표면분석법을 이용한 연자육 분말 첨가 찹쌀머핀의 품질 특성 및 최적화 (Quality Characteristics and Optimal Conditions for Sweet Rice Muffin Lotus (Nelumbo nucifera Gaertn) Seed Powder, Applying the Response Surface Method)

  • 김보람;주나미
    • 대한영양사협회학술지
    • /
    • 제26권1호
    • /
    • pp.1-13
    • /
    • 2020
  • This study was undertaken to optimize preparation of sweet rice muffins using lotus (Nelumbo nucifera Gaertn) seed powder. The experimental conditions used in the preparation included lotus seed powder (X1) and soybean oil (X2). The muffin formulation was optimized using rheology. Lightness (P<0.01) displayed a quadratic model pattern, whereas yellowness (P<0.01) and redness (P<0.05) was presented a linear model. Texture properties significantly differed in cohesiveness (P<0.05). Evaluating the sensory characteristics of muffins, except for flavor and texture, the remaining properties of color (P<0.01), taste, overall quality, and appearance (P<0.05) were found to be significantly different. The overall quality was also affected by the proportion of lotus seed powder, rather than the amount of soybean oil. The optimal ratio for palatability of muffins was determined to be 47.80 g lotus seed powder and 95.28 g soybean oil. Taken together, our results indicate that sweet rice muffins prepared using lotus seed powder are sufficiently competitive in terms of function and quality.

Surface Properties of Silane-Treated Titania Nanoparticles and Their Rheological Behavior in Silicone Oil

  • Hwang, Joon-Sik;Lee, Jeong-Woo;Chang, Yoon-Ho
    • Macromolecular Research
    • /
    • 제13권5호
    • /
    • pp.409-417
    • /
    • 2005
  • The surface of rutile titania nanoparticles was chemically modified by reacting with alkoxy silane. The surface and rheological properties in silicone oil having a wide range of viscosity were investigated. Total surface free energy($\gamma_S$) of the titania particles decreased from 53.12 to 26.94 mJ/$m^2$ as the silane used for surface treatment was increased from 0 to 5.0 wt$\%$. The surface free energy of neat silane was 25.5 mJ/$m^2$, which is quite close to that oftitania particles treated with 5.0 wt$\%$ silane. Due to the hydrophobic nature oftreated-titania, the contact angle was accordingly higher for polar solvent in the order of water>ethylene glycol> formamide>$\alpha$-bromonaphthalene. In sum of rheological behavior, as the applied shear stress or viscosity of the silicone oil increased, the titania particles tend to form layers and agglomerated clusters, showing shear-thinning and shear-thickening behaviors, sequentially. A good dispersion of discrete titania particles obeying a Newtonian flow behavior was achieved at a surface energy or low concentration of silane-treated titania particles in hydrophobic silicone oil.