• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2000년도 THE THIRD INTERNATIONAL CONFERENCE ON AGRICULTURAL MACHINERY ENGINEERING. V.III
• /
• pp.670-675
• /
• 2000

The purpose of the study is development and investigation about basic performance of the system operation on a dual fueled cogeneration system(CGS), which is operated with biogas and gas oil. As often seen in dual fueled CGS performance, the electric generating efficiency was obtained about 26□. Methane contained in the biogas could not bum completely at lower load, and it was discharged into exhaust gas. Considerable amount of the methane burned in the exhaust pipe, and the heat recovery ratio was 42□ on heat balance. As a result, the total heat efficiency, which is a summation of generating efficiency and heat recovery efficiency reached to about 70□. The supply of biogas into the engine reduces smoke density and NOx concentration in exhaust gas. At lower load, methane burned slowly and large portion of it was discharged without burning. Therefore the measures are desirable that promotes combustion of methane at lower load.

• 대한기계학회논문집 C: 기술과 교육
• /
• 제1권1호
• /
• pp.27-31
• /
• 2013

플레어 시스템은 해저 원유 시추 시 폐 가스 및 오일을 연소시키는 장비로 폐 연료 연소 시 발생하는 고 열원으로부터 선체, 장비 및 인명을 보호하기 위한 해양플랜트 기자재이다. 플레어 시스템은 유정 시험 장비 중의 하나로서 선급의 설계승인을 필수적으로 받아야 하는 주요 장비이다. 본 연구에서는 플레어 시스템의 설계 승인을 위한 작업 중 전산해석과 관련된 부분에 대해서 소개하고자 한다.

• 수산해양기술연구
• /
• 제44권1호
• /
• pp.75-80
• /
• 2008

A scrapped fiber-reinforced plastic(FRP) fishing vessel causes many environmental problems, because technology development for recycling FRP vessel has not been adequately addressed. FRP is a main material for constructing a small coastal fishing vessel that is an object of reduction policy. Therefore, the FRP wastes derived a scrapped fishing vessel are increasing. In this study, I investigated an effective disposal process for FRP through the analysis of the actual conditions of scrapped FRP fishing vessel. The treatment processes of scrapped FRP fishing vessel are carried out with oil-removing, dismantling, intermediated processing(crushing), and then reclaiming follows burning in the final processing in Korea. However, in Japan, several recycling methods have been developed, for example, the incineration including thermal recovery, the use of cement-reclamation, and the use of asphalt concrete aggregate, because the method of reclaiming after incinerating which is generally used in Korea produces a toxic by-product such as dioxin.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 B
• /
• pp.1303-1305
• /
• 2001

Photovoltaic(PV) and hydrogen are the high quality, clean-burning fuel which could replace oil and natural gas for transportation, heating and power generation. If hydrogen is made via PV-powered water electrolysis, it would be possible, in principle, to provide energy on global scale, with essentially no greenhouse gas emission and very low level of local pollution. In this paper, the operation control of PV-SPE system is briefly discussed and the simulation scheme of the system is also proposed.

• Ocean and Polar Research
• /
• 제25권4호
• /
• pp.645-652
• /
• 2003

The coastal environment of King George Island is potentially subject to contamination by pollutants arising from station operations, such as emissions from fossil fuel burning, oil spills, waste disposal, etc. As a preparatory step to assess such impacts on the marine environment and living organisms of this island, two molluscan species (the bivalve Laternula elliptica and the gastropod Nacella concinna) were selected as biomonitors for metal pollution monitoring, and their baseline levels have been investigated for the past several years at King Sejong Station. In this review, variability of the baseline levels is discussed in relation to body size, tissue type, and sex. Natural elevations of some metals are also discussed with respect to the environmental characteristics of this region.

• Journal of Advanced Marine Engineering and Technology
• /
• 제6권1호
• /
• pp.34-40
• /
• 1982

The characteristics of typical 17 kinds of fuel oils are studied to fine the calculation formulae for the required amount of air and the combustion gas amount. 1) The author's calculation formulae are as follows; (1) Theoretically required amount of air (2) Theoretical amount of combustion gas 2) Theoretical amount of the required air in combustion and combustion gas of fuel oils are always estimated less with Rosin's formula than with author's one. 3) Theoretical amount of the required air and the amount of combustion gas of fuel oils are more reasonable with author's formula than Rosin's one in comparison with results of actual analysis.

• Transactions on Electrical and Electronic Materials
• /
• 제2권2호
• /
• pp.1-4
• /
• 2001

Urgency of using plasma-energy technologies in power industry, is outlined, increasing of economical efficiency, decreasing of energy consumption and decreasing of environmental pollution, are shown, scientific and technical bases for plasma-energy technologies of fuel utilisation, are designed, results of theoretical, experimental and rig investigations of processes of plasma ignition, gasification, thermochemical preparation for burning and combined processing of coals, are presented, results of realisation of plasma technologies of residual-oil-free (mazout) pulverised-coal boiler kindling, lighting of torch and stabilisation of luid slagging in furnaces with removal of fluid slag, are described.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 추계학술대회 논문집 전력기술부문
• /
• pp.391-394
• /
• 2001

Occurring forest fire or burning bushes beneath overhead transmission lines have caused system disturbances in many countries. In this study, various tests in the simulated condition of power lines were conducted so as to investigate the reduction in insulation strength caused by combustion flame. The results of an experimental investigation into the flashover characteristics of air dielectric strength in the presence of oil flame are reported. It is demonstrated that flame can reduce by more than half, 80% in maximum, the breakdown voltage of a model line.

• Nuclear Engineering and Technology
• /
• 제39권6호
• /
• pp.683-690
• /
• 2007

Because of increasing concerns regarding global warming and the longevity of oil and gas reserves, the importance of nuclear energy as a major source of sustainable energy is gaining recognition worldwide. To make nuclear energy truly sustainable, it is necessary to ensure not only the sustainability of the fuel supply but also the sustained availability of waste repositories, especially those for high-level radioactive waste (HLW). From this perspective, the effort to maximize the waste loading density in a given repository is important for easing repository capacity problems. In most cases, the loading of a repository is controlled by the decay heat of the emplaced waste. In this paper, a comparison of the decay heat characteristics of HLW is made among the various fuel cycle options. It is suggested that, for a future fast breeder reactor (FBR) cycle, the removal and burning of minor actinides (MA) would significantly reduce the heat load in waste and would allow for a reduction of repository size by half.

• International Journal of Computer Science & Network Security
• /
• 제22권3호
• /
• pp.89-94
• /
• 2022

The Saudi Vision 2030 defined the directions of the national economy and market towards diversifying sources of income, and developing energy to become less dependent on oil. The study sought through a theoretical review to identify the reality of the energy sector and the areas of investment available in the field of renewable energy. Findings showed that investment in the renewable energy sector is a promising source according to solar, wind, hydrogen, geothermal energy and burning waste than landfill to extract biogas for less emission. The renewable energy sector faces challenges related to technology, production cost, price, quantity of production and consumption, and markets. The study revealed some recommendations providing and suggested electronic marketing system to provide investors and consumers with energy available from renewable sources.