• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.7
• /
• pp.1341-1350
• /
• 1992

This paper addresses the practical problem of finding a useful strain energy function of the incompressible rubberlike materials. It examines methods by which the form of the functions are determined and shows how the selection of experimental data influences the resulting form of the functions. From this information, an optimal choice of the form of energy functions becomes possible. Phenomenological theories used in this paper are limited to elastic, incompressible material models. Due to the nature of the phenomenological methods, these theories are accurate only for the materials treated. However, they serve as a starting basis for the study of more complicated material behaviors.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.21 no.4
• /
• pp.174-180
• /
• 2013

The vibration characteristic of tire is heavily related to the noise and comfort on driving. Therefore, in this paper, we investigate modal charateristic of non-pneumatic tires with Honeycomb spokes. The modal analysis of non-pneumatic tire is investigated for geometric of non-pneumatic tire(NPT) which is designed according to the cell angle of honeycomb cell. Investigation of natural frequencies and mode shapes of non-pneumatic tire are compared regular type NPT with auxetic type NPT. The analysis is based on the finite element method and used ABAQUS program which is able to analyze of non-linear. The material of NPT is used for the Ogden energy model which is model of hyperelastic material. As a result, natural frequencies and mode shapes of non-pneumatic tires with honeycomb spokes are affected by the angle of honeycomb cell.

• The Plant Pathology Journal
• /
• v.25 no.1
• /
• pp.54-61
• /
• 2009

An infectious full-length clone of Soybean mosaic virus (SMV) strain G5H was constructed under the control of the cauliflower mosaic virus 35S promoter. The cloned SMV G5H established infections upon simple rub-inoculation of soybean leaves with intact plasmid DNA. We demonstrated that this SMV G5H infectious DNA clone caused typical characteristic symptoms and virulence of SMV strain G5H in twelve tested soybean cultivars. Soybean cultivars Lee74, Somyungkong and Sowonkong developed systemic mosaic symptom while Kwanggyo, Taekwangkong, Hwangkeumkong and Geumjeongkong-l showed systemic necrosis. In contrast, Geumjeongkong-2, Jinpumkong-2, L29, V94-5152 and Ogden showed resistant response against SMV-G5H infection. We also determined full-length sequence of cloned SMV-G5H. The phyogenetic analyses reveal that SMV-G5H is most closely related to SMV-G5, and support that SMV-G5H might be derived from SMV-G5 by recombination rather than mutation.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.778-781
• /
• 2002

Durability of rubber dust cover in the ball joint for automotive suspension parts were analyzed by FEM and compared with experimental data. Upper open area of ball joint is sealed by dust cover for preventing outflow of the lubricating oil and intrusion of send, dust, water, etc. This rubber cover undergoes repeated loadings such as tension and compression while the car is running. Analysis about rubber material needs to consider every kinds of nonlinearities arise in finite element analysis, which are geometric nonlinearity due to large displacement and small strain, materially nonlinearity and nonlinear boundary condition such as contact. So in the study, the deformation behavior of dust cover was analysed by using the commercial finite element program MARC. This program could solve these kinds of nonlinear analysis accurately. Finite element model of dust cover is considered as 3-dimensional half model based on 2-dimensional axisymmetric model. Material property of rubber was modeled by Ogden model and input data for calculation takes form uniaxial tension test of rubber specimen, The final object of the study is obtaining the design specification of dust covers and the result of analysis should be a useful data to design of rubber

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.11
• /
• pp.150-157
• /
• 2003

In this paper, the large deformation of hollow silicon rubber gasket is treated. The frictional contact occurs between groove and the outer part of hollow gasket, and the frictional self-contact exists in the inner parts of hollow gasket. The silicon rubber has the nonlinear elastic behavior and its material property is approximately incompressible. Hence, the stress analysis requires an existence of a strain energy function, which is usually defined in terms of invariants or stretch ratio such as generalized Mooney-Rivlin and Ogden model. Considering large compressive deformation and friction, Mooney-Rivlin 3rd model and Coulomb's friction model are assumed. The numerical analysis is obtained by the commercial finite element program MARC. But, due to large deformation, the elements degenerate in the inner parts of hollow gasket. This means that the analysis of subsequent increments is carried out with a very poor mesh. In order to continue the analysis with a sufficient accuracy, it is necessary to use new finite element modeling by remesh. Experiments are also performed to show the validity of present method. As a conclusion, numerical results by this research have good agreements with experiments.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.3
• /
• pp.357-362
• /
• 2011

Air springs are prevalently used as suspension in train. However, air springs are seldom used in automobiles where they improve stability and comfort by enhancing the impact-relief, breaking, and cornering performance. Thus, this study proposed a new method to analyze air springs and obtained some reliable design parameter which can be utilized in vehicle suspension system in contrast to conventional method. Among air spring types of suspension, this study focused on sleeve type of air spring as an analysis model since it has potential for ameliorating the quality of automobiles, specifically in its stability and comfort improvement by decreasing the shock through rubber sleeve. As a methodology, this study used MARC, as a nonlinear finite element analysis program, in order to find out maximum stress and maximum strain depending on reinforcement cord's angle variation in sleeves. The properties were found through uniaxial tension and pure shear test, and they were developed using Ogden Foam which is an input program of MARC. As a result, the internal maximum stresses and deformation according to the changes of cord angle are obtained. Also, the results showed that the Young's modulus becomes smaller, then maximum stresses decrease. It is believed that these studies can be contributed in automobile suspension system.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.11
• /
• pp.1897-1906
• /
• 2003

A finite element analysis for near-net-shape forming of A16061 powder was performed under warm rubber isostatic pressing and warm die pressing. The advantages of warm compaction by rubber isostatic pressing were discussed to obtain a part with better density distributions. The shape of rubber mold was designed by determining a cavity shape that provides a desired shape of the final powder compact. To simulate densification and deformed shape of a powder compact during pressing, the elastoplastic constitutive equation based on yield function of Shima-Oyane was implemented into a finite element program(ABAQUS). The hyperelastic constitutive equation based on the Ogden strain energy Potential was employed to analyze nonlinear elastic response of rubber. Finite element results were compared with experimental data for Al6061 powder compacts under warm die pressing and warm isostatic pressing.

• Korean Journal of Computational Design and Engineering
• /
• v.10 no.5
• /
• pp.375-379
• /
• 2005

Durability of rubber dust cover in the ball joint for automotive suspension parts is analyzed by FEM and compared with experimental data. Upper open area of ball joint is sealed by dust cover for preventing outflow of the lubricating oil and intrusion of send, dust, water, etc. This rubber cover undergoes repeated loadings such as tension and compression while the car is running. Analysis about rubber material needs to consider every kinds of nonlinearities arise in finite element analysis, which are geometric nonlinearity due to large displacement and small strain, materially nonlinearity and nonlinear boundary condition such as contact. The deformation behavior of dust cover is analysed by using the commercial finite element program MARC. In the study, this program could solve these kinds of nonlinear analysis accurately. Finite element model of dust cover is considered as 3-dimensional half model based on 2-dimensional axisymmetric model. Material property of rubber is modeled by Ogden model and input data for calculation takes form uniaxial tension test of rubber specimen. The final object of the study is obtaining the design specification of dust covers and the result of analysis should be a useful data to design of rubber cover.

• Journal of Institute of Convergence Technology
• /
• v.7 no.2
• /
• pp.13-16
• /
• 2017

The design of sealing mechanisms of a manual pressure valve was analyzed with FE analysis for a hydrogen fuels charge and discharge system of FCEV. The damage prediction of the O-ring with respect to the material models of rubbers was calculated by the gap analysis of the backup ring and O-ring according to the internal pressure. Two kinds of the rubber material characteristic models were adopted to the O-ring. One was the linear elastic and the other was hyperelastic of Ogden $3^{rd}$ order model. The experimental data of urethane of Shore hardness 90 was utilized to the curve fitting of hyperelastic properties. It was found that the contact pattern of the backup ring was different in two models and the sealing mechanism was better in the case of the hyperelastic characteristic model.

• Structural Engineering and Mechanics
• /
• v.76 no.5
• /
• pp.653-661
• /
• 2020

The paper presents a study regarding rubber compressibility behavior. The objective is to analyze the effect of compression degree of rubber on its mechanical properties and propose a new methodology based on reverse engineering to predict compressibility degree based on uniaxial stretching test and Finite Element Analysis (FEA). In general, rubbers are considered to be almost incompressible and Poisson's ratio is close to 0.5. Since this property is intimately related to the rubber packing density, little changes in Poisson's ratio can lead to significant changes regarding mechanical behavior. The deviatory hyperelastic constants were obtained through experimental data fitting by least squares method for the most relevant constitutive models implemented in commercial software Abaqus, such as: Neo-Hooke, Mooney-Rivlin, Ogden, Yeoh and Arruda-Boyce, whereas the hydrostatic part was determined through an optimization algorithm implemented in the Abaqus environment by Python scripting. The simulation results presented great influence of the Poisson's ratio in the rubber specimen mechanical behavior mainly for high strain levels. A conventional pure volumetric compression test was also carried out in order to compare the results obtained by the proposed methodology.