• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.10C
• /
• pp.1032-1041
• /
• 2007

The global navigation satellite system (GNSS), which is the core technique for the location based service, adopts the direct sequence/spread spectrum (DS/SS) as its modulation method. The success of a DS/SS system depends on the synchronization between the received and locally generated pseudo noise (PN) signals. As a step in the synchronization process, the tacking scheme performs fine adjustment to bring the phase difference between the two PN signals to zero. The most widely used tracking scheme is the delay locked loop with early minus late discriminator (EL-DLL). In the ideal case, the EL-DLL is the best estimator among various DLL. However, in the band-limited multipath environment, the EL-DLL has tracking bias. In this paper, the timing offset range of correlation function is divided into advanced offset range (AOR) and delayed offset range (DOR) centering around the correct synchronization time point. The tracking bias results from the following two reasons: symmetry distortion between correlation values in AOR and DOR, and mismatch between the time point corresponding to the maximum correlation value and the synchronization time point. The former and latter are named as the type I and type II tracking bias, respectively. In this paper, when the receiver has finite bandwidth in the presence of multipath signals, it is shown that the type II tracking bias becomes a more dominant error factor than the type I tracking bias, and the correlation values in AOR are not almost changed. Exploiting these characteristics, we propose a novel tracking bias mitigation scheme and demonstrate that the tracking accuracy of the proposed scheme is higher than that of the conventional scheme, both in the presence and absence of noise.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.47 no.4
• /
• pp.97-104
• /
• 2010

In this paper, we provide an embedded type non-contact bio-radar heart and respiration rate monitoring system. We implemented the rate finding algorithm into the embedded system. The high-speed and reliable real-time signal processor is then tested. To avoid null-point data loss problem, we applied quadrature demodulation. Among several other combining techniques, we suggest arctangent demodulation for quadrature channel combining and DSP is used for real-time signal processing. We also suggest DC-offset compensation technique to preserve the wanted DC components of the IQ signals for accurate demodulation while keeping the dynamic range of the ADC lower. Using Texas Instrument C6711 series DSP and external 12Bit ADC, we implemented proper elliptic digital filter and autocorrelation detection algorithm for robust commercial hand held device.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.12
• /
• pp.2226-2234
• /
• 2016

Orthogonal Frequency Division Multiplexing (OFDM) technique uses multiple sub-carriers for the data transmission. Therefore, Inter Carrier Interference(ICI) is generated because of nonlinear high power amplifier and carrier frequency offset. Wireless OFDM transmission over Doppler fading channels also causes ICI. In OFDMA(Orthogonal Frequency Division Multiplexing Access), multiple sub-carriers are allocated to each user. Therefore, inter carrier interference causes interference to other users. I evaluate the BER performance of OFDMA systems in frequency selective fading channel, considering Multi-User Interference (MUI) owing to the carrier frequency offset, the nonlinear high power amplifier, and the Doppler fading. In the uplink OFDMA, multi-user interference introduces larger BER degradation than in the downlink. I explain the reason and obtain the required characteristics of the nonlinear amplifier and the value of frequency offset for good BER performance. And I also analyze the BER degradation upon Doppler fading channel.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.13 no.6
• /
• pp.480-489
• /
• 1988

Although CDP stacking of common depth gathering is used to get the zero-offset-section, the exploding reflector concept is examined for the modeling of zero source to receiver offset sections in this paper. The acoustic wave equation is compared with a one way wave equation which represents the upgoing wave field only. The one way wave equation used is not derived through an expansion and, therefore, can represent dips up do 90b degrees and may not lost the signals by the dipping angles. There is apparently no simple counterpart of this equation is the space domain and it can be conveniently implemented only by a Fourier method. This paper compares their modeling technique with ray tracing and wave method for over thrust structure which is one of the geological structures are dificult to process and interpret. As a result of modeling much clean and accurate signals, especially, diffractions form the corner and dipping angles can be gathered.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.10A
• /
• pp.935-942
• /
• 2006

The performance of ROF systems can be severely degraded due to nonlinear effects in the channel. Also, Orthogonal Frequency Division Multiplex(OFDM), as a standard for broadband wireless and mobile internet networks, is being proposed for deployment with ROF systems to facilitate the total performance of a system. In this paper, at first, the performance of the OFDM-based RoF system with a Mach-Zehnder(MZ) modulator distortion effects has been analyzed at 5.8GHz. Evaluation of mean-squared error of the proposed OFDM-RoF system was carried out to compare with the conventional single carrier system based RoF link after the modulator distortion case and also for fixed signal to noise ratio(SNR) of 20dB using undistorted OFDM signal. Nominal and offset baising pre-distortion techniques are applied in proposed system to linearize the OFDM-RoF link. Finally, a comparison between the aforementioned pre-distortion techniques applied showed important observation in terms of distortion-free dynamic range and SNR to choose offset pre-distortion technique for our proposed system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.11C
• /
• pp.1581-1591
• /
• 2004

In this paper, we investigate the design of three low-complexity joint estimation algorithms(LJEAs) for frequency offset and carrier phase. The proposed LJEAs are based on the interpolation technique of correlation values of the received signal in frequency and phase domains. With these algorithms, the estimation ranges $\Delta$f$_{d}$${\times}$T$_{s}$ . are less than 1/2N$_{s}$ , and 1/N$_{s}$ which are comparable to conventional algorithms. The Proposed LJEAs require only 2N$_{s}$ or 4N$_{s}$ complex multiplications which are very simple compared with the conventional algorithms. Nevertheless the estimation accuracies of the LJEAs are as good as those of the conventional algorithms. Suitable areas of application include joint estimation of frequency offset and carrier phase in burst-mode digital transmission such as satellite communications.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.17 no.4
• /
• pp.492-498
• /
• 2017

In this paper, we integrate a divide-by-3 injection-locked frequency divider (ILFD) in CMOS technology with a $0.18-{\mu}m$ BiCMOS process. We propose a self-injection technique that utilizes harmonic conversion to improve the locking range, phase-noise, and input sensitivity simultaneously. The proposed self-injection technique consists of an odd-to-even harmonic converter and a feedback amplifier. This technique offers the advantage of increasing the injection efficiency at even harmonics and thus realizes the low-power implementation of an odd-order division ILFD. The measurement results using the proposed self-injection technique show that the locking range is increased by 47.8% and the phase noise is reduced by 14.7 dBc/Hz at 1-MHz offset frequency with the injection power of -12 dBm. The designed divide-by-3 ILFD occupies $0.048mm^2$ with a power consumption of 18.2-mW from a 1.8-V power supply.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.10
• /
• pp.27-33
• /
• 2016

This paper proposes a Low Noise Amplifier (LNA) with chopper stabilization technique with a sample-hold circuit. Chopper stabilization technique is effective in terms of reducing low frequency offset and flicker noise. Conventional chopper amplifier has a disadvantage in area because of using Low Pass Filter (LPF) for remove chopping spike. The proposed chopper amplifier employed sample and hold technique to decrease chopping spike instead of LPF that improves 36% in voltage damping and 11% in area.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.10A
• /
• pp.950-957
• /
• 2007

In this paper, a recursive intercarrier interference (ICI) cancellation technique for cooperative space-time block coded orthogonal frequency division multiplexing (STBC-OFDM) with different carrier frequency offsets (CFOs) is proposed. Also, different CFOs existing in a cooperative STBC-OFDM system is shown to produce phase difference in the received signal, causing noise enhancement effect in the STBC decoding process. The performance degradation caused by the noise enhancement effect can be effectively reduced by a proposed ML-based recursive ICI cancellation technique. It is shown by computer simulation that the proposed recursive ICI cancellation technique is effective in reducing ICI, especially for STBC-OFDM systems with a large FFT size and large CFOs.

• KIEE International Transactions on Power Engineering
• /
• v.5A no.2
• /
• pp.138-143
• /
• 2005

During faults, the voltage and current signals available to the relay are affected by the decaying dc component and harmonics. In order to make appropriate and accurate decisions, most of the relaying algorithms require the fundamental frequency phasor information that is immune to decaying dc effect and harmonics. The conventional Fourier ph as or estimation algorithm is affected by the presence of decaying-exponential transients in the fault signal. This paper presents a modified Fourier algorithm, which effectively eliminates the decaying dc component and the harmonics present in the fault signal. The decaying dc parameters are estimated by means of an out-of-band filtering technique. The decaying dc offset and harmonics are removed by means of a simple computational procedure that involves the design of two sets of Orthogonal digital OFT filters tuned at different frequencies and by creating three off-line look-up tables. The technique was tested for different decay rates of the decaying dc component. It was also compared with the conventional mimic plus the full cycle OFT algorithm. The results indicate that the proposed technique has a faster convergence to the desired value compared to the conventional mimic plus OFT algorithms over a wide range of decay rates. In all cases, the convergence to the desired value was achieved within one cycle of the power system frequency.