• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.27 no.1
• /
• pp.10-19
• /
• 2019

As a domestic aviation industry has been growing continuously, the air traffic volume of en-route has increased rapidly to 2,300 a day. According to developing air navigation system including Performance Based Navigation(PBN), the manner of flights has diversified. Consequentially task of air traffic service has been increasing more and more and the organization of Air Traffic Service(ATC) established one Air traffic management Office(ATMO), extends to 3 Regional organization(Seoul, Busan, Jeju) and a number of air traffic controller exceeds 600. The purpose of this research is going to investigate the relationship between organization's safety climate and air traffic controller's safety behavior, In pursuing above, previous studies related to co-worker and supervisor's safety climate were examined for literature review. Based on this previous studies, research model was constructed. Hypothesis was verified by effect. Data from 209 samples was employed for final survey. The main results show that co-worker and supervisor's safety climate were meaningful factors to effect perceived Safety Behavior and safety knowledge, safety motivation were significantly and positive related to safety compliance.

• Journal of Korean Clinical Health Science
• /
• v.6 no.2
• /
• pp.1115-1125
• /
• 2018

purpose : The purpose of the study is to investigate opinion on the legalization of the actual work of clinical dental hygienists. Methods : A self-reported questionnaire was completed by 171 dental hygienists in Busan and Gyeongnam from December 1, 2017 to January 31, 2018. Structured questionnaires were uesd for analysis. The collected data was analyzed using IBM SPSS. Statistic 20.0. Results : The first, assist of dental treatment, Second, dental health care education and consulting duties, and third priority preventive duties were found to be the most important duties in the dental office. Currently, it was investigated perform in a lot of workplace. Preventive treatment tasks include scaling, teeth polishing, applying fluoride and assist of dental treatment include preparation for medical care, preparation for implant surgery, preparation for oral surgery, implant surgery assistant and patient care training, and preparation for periodontal surgery. Conclusion : As a result, the dental hygienist performing a lot of dental assist tasks, oral health education counseling and preventive duties. Nonetheless, clinical dental hygienists are outlaws due to the disparity between practical and legal duties. Therefore, it is urgent to legislate actual duties of dental hygienist so that experts can fully exercise the competency of the public in promoting dental health. Relevant governments and related organizations should take reasonable measures to solve this problem.

• Journal of Information Technology Applications and Management
• /
• v.25 no.4
• /
• pp.185-196
• /
• 2018

This study investigates the social network among authors to improve the quality of Panel researches. Korea Health Panel (KHP), implemented by the collaborative work between KIHASA (Korea Institute for Health and Social Affairs) and NHIC (National Health Insurance Service) since 2008, provides a critical infrastructure for policy making and management for insurance system and healthcare service. Using bibliographic data extracted from academic databases, eighty articles were extracted in domestic and international journals from 2008 to 2014, April. Data were analyzed by NetMiner 4.0, social network analysis software, to identify the extent to which authors are involved in healthcare use research and the patterns of collaboration between them. Analysis reveals that most authors publish a very small number of articles and collaborate within tightly knit circles. Centrality measures confirm these findings by revealing that only a small percentage of the authors are structurally dominant, and influence the flow of communication among others. It leads to the discovery of dependencies between the elements of the co-author network such as affiliates in health panel communities. Based on these findings, we recommend that Korea Health Panel could benefit from cultivating a wider base of influential authors and promoting broader collaborations.

• The Journal of Asian Finance, Economics and Business
• /
• v.8 no.5
• /
• pp.1019-1029
• /
• 2021

The study aims to investigate the impact of psychological climate, self-resilience, Organizational Citizenship Behaviour (OCB) and job stress on employee performance during Covid-19 pandemic. This paper also attempts to find out the mediating role of OCB and job stress in this context. A confirmatory survey was conducted on 316 employees of several institutions in Indonesia who worked from home during Covid-19 for a minimum period of 2 months. The research revealed that 1) PC has significant and positive influence on OCB and performance; 2) Self resilience have positive and significant influence on performance; 3) PC and self-resilience have a negative influence on job stress; 4) there are insignificant relationship between self-resilience on OCB; OCB and job stress on performance; 5) PC and self-resilience have no indirect influence on performance through OCB and job stress. The findings of this study reveal that organizations expected to have strategic approach in order to handle Covid-19 pandemic in different work patterns that are required to carry out routine office tasks from home, including handling stress as a fast adaptation for both employees and organizations that have a routine task from home.

• Korean Journal of Construction Engineering and Management
• /
• v.22 no.3
• /
• pp.3-11
• /
• 2021

The construction project manager must clearly carry out the activities of each construction stage specified in the 'Task Description'. In this study, 'design change' and 'completion process' were classified as core tasks in consideration of the frequency and importance of tasks. And, by analyzing the actual construction project, the task contents for the core work were standardized. This laid the foundation for the ordering office, construction project management technicians, and builders to clearly understand the business areas of construction project management and fulfill their responsibilities for their respective tasks.

• Journal of Korean Institute of Architectural Sustainable Environment and Building Systems
• /
• v.12 no.6
• /
• pp.557-566
• /
• 2018

The ZEB certification system has come into effect since 2018 according to the ZEB road map. From 2020, the public buildings with the total floor area smaller than $3000m^2$ are the target of the certification, and it will be extended to the buildings with up to $5000m^2$ floor area in 2025. However, current mandatory regulations for public office buildings seem already to meet the ZEB certification system planned for 2025. In this work, two buildings belong to $3,000{\sim}5,000m^2$ in total floor area were selected to analyze the possibility of meeting the ZEB certification only by following current obligation regulations. Results showed that the test buildings satisfied the minimum building energy efficiency and energy self-sufficiency rates for the ZEB certification when the mandatory insulation and installation ratio of renewable energy are applied. This can be useful for revising the road map or extending the target buildings of the ZEB certification.

• The Journal of Asian Finance, Economics and Business
• /
• v.8 no.2
• /
• pp.595-604
• /
• 2021

For civil servants in the legal sector, the best performance that must be shown is not how they carry out activities following standard operational procedures but what is more important is how they show Organizational Citizenship Behavior (OCB) in daily activities. This study aims to examine what factors influence the formation of OCB civil servants in the legal sector in Indonesia. The study was conducted on 145 civil servant respondents who were involved in secretarial activities, each from the Judicial Commission Secretariat, the Attorney General's Office, the Ministry of Justice, the Supreme Court, the Police Headquarters, and the Constitutional Court. The research methodology used Partial Least Square (PLS) Version 3.0. The empirical findings of the research show that organizational culture has a significant influence in shaping transformational leadership that can build OCB among civil servants in Indonesia. This effect is much larger and more significant than the compensation system, which is widely believed to be the main factor in forming OCB, such as the results of previous studies. The results of this study imply that the formation of an organizational culture with values that can create high work productivity which has an impact on transformational leadership styles in building OCB.

• Journal of the Korean Institute of Rural Architecture
• /
• v.23 no.4
• /
• pp.72-79
• /
• 2021

Religious architecture in the Gwangju and Jeonam regions played the role of local culture, and in particular, cathedral architecture maintains a consistent religious context and seeks to integrate with the local community. This study is to investigate and analyze the overall data to find out the characteristics and meaning of the Eucharistic adoration, which played a central role in the religious aspect and the space in the cathedral, and used it as basic data for the study of local cathedral architecture. The Eucharistic adoration was activated starting from the time when the Eucharist storage room was placed in the Middle Ages, and in 1979, when Pope John Paul II published a letter, and Bishop Na Gilmo of Incheon introduced the Eucharist, the Eucharistic adoration movement was activated in parishes across the country. However, regarding the Eucharistic adoration, a way to use its spatial meaning and religious use is still unknown, even to its believers. The Eucharistic adoration of the cathedral contains the main spiritual function of managing faith rather than the functions of mission, fellowship, and office work. An approach which composes the liturgical spaces in various architectural planning methods is necessary, but the fundamental and religious meaning must not be abandoned.

• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.794-799
• /
• 2009

The temperature control of in-place concrete is the most important factor for an early age of curing concrete. Heat stress of mass concrete caused by the heat of hydration can induce the crack of concrete, and a frost damage from cold weather casting concrete results defect on compressive strength and degradation of durability. Therefore, success and failure of concrete work is dependant on the measurement and control of concrete temperature. In addition, the compressive strength assessment of in-place concrete obtained from the maturity calculated from the history of temperature make a reduction of construction cycle time, possible. For that purpose, wireless temperature measuring system was developed to control temperature and assess strength of concrete. And, it was possible to monitor the temperature of concrete over 1km apart from site office and to take a proper measure; mesh-type network was developed for wireless sensor. Furthermore, curing control system that contains the program capable to calculate the maturity of concrete from the history of temperature and to assess the compressive strength of concrete was established. In this study, organization and practical method of developed curing control system are presented; base on in-place application case.

• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.218-223
• /
• 2009

During the process of excavation for substructures of buildings, precise and constant measurements of retaining wall displacement is crucial for construction to be complete and safe. Currently an inclinometer is used to measure displacement around the perimeter of an excavation site. The existing inclinometer system requires an instrument to be placed inside pre-bored holes for each measurement with an typical interval of two weeks. This makes it difficult to obtain continuous displacement data, especially during a critical time such as rainy season in summer. Also, the existing inclinometer is placed at certain distance away from the retaining wall system itself. Thus, exact measurement of retaining wall movement is compromised because of the distance between the retaining wall and the inclinometer. This paper presents the development of wireless inclinometer system for the displacement measurement of retaining walls by being attached directly to the retaining wall. The result of the application of the developed systems are provided with advanced ubiquitous sensor network (USN) system features. The USN technique incorporated into the system enables users to monitor movement data from wherever possible and convenient such as construction manager's office on site or any other places connected through internet. The research work presented in this paper will provide a basis to save construction time and cost by preventing safe-related unexpected delay of construction due to the failure or collapse of retaining walls.