• Design & Manufacturing
• /
• 제2권5호
• /
• pp.39-42
• /
• 2008

The Paper discussed the effects of working electric current and pulse when using super hardend alloy drill as corona electrode. The discharge effect can be obtained very precisely in the ranges of 1A - 2A in working current. $12{\mu}s-14{\mu}s$ in dis charge pulse on time width and $8{\mu}s-10{\mu}s$ in discharge pulse off time.

• 비파괴검사학회지
• /
• 제27권3호
• /
• pp.255-261
• /
• 2007

By using numerical analysis methods, through transmission type pulsed eddy current (PEC) testing is modeled and PEC signal responses due to varying material conductivity, permeability, thickness, lift-off and pulse width are investigated. Results show that the peak amplitude of PEC signal gets reduced and the time to reach the peak amplitude is increased as the material conductivity, permeability, and specimen thickness increase. Also, they indicate that the pulse width needs to be shorter when evaluating the material conductivity and the plate thickness using the peak amplitude, and when the pulse width is long, the peak time is found to be more useful. Other results related to lift-off variation are reported as well.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권2호
• /
• pp.1789-1791
• /
• 2007

We fabricated OTFT-OLED display panel by using Ag-paste for source and drains electrode of OTFTs. The OTFTs were fabricated by solution processes such as spin-coating for PVP gate dielectric and screen printing for S/D electrodes with Ag-paste, except pentacene active layer which was deposited by evaporation. The mobility was 0.024 cm2/V.sec , off state current ${\sim}10-11A$, threshold voltage 7.6 V and on/off current ratio ${\sim}105$. The panel consisted of 16 x 16 pixels and each pixel consisted of 2 OTFTs, 1 Capacitor and 1 OLED. The pixels successfully worked in terms of current magnitude supplied to OLED and the control ability of driving and switching OTFTs.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 정기총회 및 추계학술대회 논문집 학회본부
• /
• pp.240-242
• /
• 1993

A novel structure, which can suppress latch-up phenomena, is proposed and verified by the PISCESIIB simulation. It is shown that this structure employing the selective N+ buffer layer increases latch-up current density due to suppression of the current flowing through the p-body. The width of the N+ buffer layer is optimized considering the trade-off between the latch-up current density and the forward voltage drop. The selective buffer layer results in an improved trade-off relationship compared with the uniform buffer layer.

• Journal of Power Electronics
• /
• 제16권5호
• /
• pp.1791-1801
• /
• 2016

This paper considers a carrier based signal injection method for use in the three shunt sensing inverter (TSSI) for sensorless motor control. It also analyzes the loss according to the injection axis of the voltage signal. To remove both the phase current and rotor position sensors, a sensorless method and a phase current reconstruction method can be simultaneously considered. However, an interaction between the two methods can be incurred when both methods inject voltage signals simultaneously. In this paper, a signal injection based sensorless method with the 120° OFF Discontinuous PWM (DPWM) is implemented in a TSSI to avoid this interaction problem. Since one leg does not have a switching event for one sampling period in the 120° OFF DPWM, the switching loss is altered according to the injection axis. The switching loss in the d-axis injection case can be up to 32% larger than that in the q-axis injection case. Other losses according to the injection axis are also analyzed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
• /
• pp.1061-1062
• /
• 2006

This paper represent improved On-line Turn off, commutation Angle control schemes for switched reluctance motors based on current control. For the purpose of the finding optimal commutation switching angle point, it is utilized turn on and turn off position calculation with inductance vs. current vs. flux linkage analysis method. The goal of proposed paper is the maximization of the energy conversion per stroke and maximizing efficiency and obtaining approximately flat-topped current waveform. The proposed control scheme is demonstrated on a simulation experimental result.

• 대한전기학회논문지
• /
• 제35권9호
• /
• pp.396-402
• /
• 1986

Although the structure of the brushless DC motor is similar to the one of the permanent magnet synchronous motor, its operating characteristics are the same as those of the permanent magnet DC motor. This is the reason that the commutators and brushes in the permanent magnet DC motor can be replaced by the power semiconductor devices and rotor position sensors for the brushless DC motor. In this paper, a current control method is presented to make a sinusoidal current waveform for constant torque generation and the operating characteristics of the brushless DC motor using the resolver as the rotor position sensor is also presented and experimented.

• 전기전자학회논문지
• /
• 제16권2호
• /
• pp.116-120
• /
• 2012

본 논문에서는 밀리미터파 응용에 사용 가능한 우수한 성능의 50 nm InGaAs/InAlAs/GaAs metamorphic HEMT를 구현하였다. 게이트 길이가 50 nm이며 단위 게이트 폭이 30 ${\mu}m$인 2개의 게이트를 가지고 있는 MHEMT의 측정결과, 740 mA/mm의 드레인 포화 전류밀도와 1.02 S/mm의 상호전달 전도도를 얻었으며 전류이득차단주파수와 최대공진주파수는 각각 430 GHz와 406 GHz의 특성을 나타내었다.

• Journal of Power Electronics
• /
• 제11권3호
• /
• pp.285-293
• /
• 2011

This paper proposes two SRM driving systems using a variable dc-link voltage controlled by a single-phase inverter. Two SRM converter topologies of a half bridge type and a full bridge type are proposed according to the power circuits of an inverter. The phase current can be controlled by means of a PWM controller at the inverter, and the turn-on/off angle at the phase switches can be controlled by a position sensor at the converter in the drive system. The inverter acts as a peak-current limiter if the transient current exceeds its maximum value. SRMs using the proposed topologies maintain high efficiency due to energy regeneration after the turn-off of power switches. The operational modes of the proposed topologies are verified by simulation and experimental results.

• 한국콘텐츠학회논문지
• /
• 제15권7호
• /
• pp.228-243
• /
• 2015

본 연구에서는 노동조합 조합원인 장기해고노동자들이 해고와 이후 실업기간을 어떻게 경험하는지 그 변화과정을 현상학적 방법으로 분석하였다. 연구대상자는 평균해고 기간이 8년 4개월인 남성 해고노동자로 5명을 심층 면담하였다. 해고 당시의 심리적 경험, 해고 이후 지속적인 심리적 또는 신체적 변화, 현재 상태, 해고기간 동안의 대처방법 등을 반구조화 질문지에 근거하여 심층 면담을 진행하여 자료를 수집하였다. 이를 분석한 결과 21개의 하위 주제와 이를 포괄하는 5개의 상위주제를 구성하였다. 중요상위주제는 '해고 당시와 이후의 감정과 인식', '해고가 장기화되면서 생기는 증상과 변화', '장기화된 현재의 상태', '사회적 인식에 대한 양상', '해고에 대한 대처' 이었다. 상위주제와 하위범주에 대하여 기술하고 이와 관련된 장기해고노동자의 경험을 구체적으로 기술하였다. 마지막으로 장기해고노동자의 변화 및 경험을 선행연구를 바탕으로 논의하였다.