• Clean Technology
• /
• v.14 no.3
• /
• pp.171-175
• /
• 2008

The effect of the addition of $Al^{3+}$ dopant on the electrochemical characteristics of $Li_{4}Ti_{5}O_{12}$ was investigated. $Li_{4}Ti_{5}O_{12}$ is known as a 2ero-strain material, and $Li_{3.95}Al_{0.15}Ti_{4.9}O_{12}$ has been manufactured by solid-state reaction with high energy ball milling (HEBM). The samples were heated at 800, 900 and $1000^{\circ}C$ in electric furnace. The structural and surface structures were measured by XRD (X-ray diffraction) and SEM (scanning electron microscopy). Cut-off voltage of charge/discharge cycles was $1.0{\sim}3.0 V$ to investigate reversible capacity, cycle stability and plateau voltage. The reversible capacity of $Li_{3.95}Al_{0.15}Ti_{4.9}O_{12}$ was 138 mAh/g.

• Journal of The Korean Association For Science Education
• /
• v.35 no.1
• /
• pp.27-35
• /
• 2015

General education is changed by accepting the change in education environment to digital generation, emphasis about student-centered education, and change of teacher's role. E-learning has taken center stage as an effective learning environment but the problems are drawn for the absence of interaction that is important in learning. In this study, on the basis of questionnaire results about learning using website, we operated blended-learning where students come and go in cyberspace and physical space to set up the lesson environment for emphasizing interaction. We selected a control group (N=40) and an experimental group (N=40) from second grade students in a middle school for this research. General instructor-led lessons were implemented in the control group and blended-learning lessons to emphasize interaction between teacher and students were implemented in the experimental group. The experiments were applied to eight class-hours in 'characteristics of matter' unit. We implemented Test of Science Related Attitude (TOSRA) to the students before and after the lessons and administered questionnaire for checking attitude changes and perception in students. The results of the test show that the experimental group students were more encouraged and became more confident and curious about scientific learning than the control group students. The analysis of the interview and results of TOSRA show that blended-learning provided guidance and feedback by the teacher to the experimental group students more than the control group students. Blended-learning is suggested as a learning-method that is helpful in improving scientific attitude in students because it enables them to express their experiences without limit of time-space and promote interaction between teacher and students.

• Journal of Preventive Medicine and Public Health
• /
• v.30 no.2 s.57
• /
• pp.356-368
• /
• 1997

In effort to determine whether aircraft noise can have health effects such as hearing loss, hypertension and psychological stress, a total of 111 male professors and administrative officers working a college near a military airport in Korea(exposed group) and a total of 168 males and 112 females matched by age groups(control groups) were analyzed. Personal noise exposure and indoor and outdoor sound level of jet aircraft noise were measured at the exposed are3. And pure tone, air conduction test and measurement of blood pressure were given to the exposed(males) and matched control groups (males and females). BEPSI(Brief Encounter Psychological Instrument) and psychological response to aircraft noise were examined for the exposed group. The noise dosimetry results revealed time-weighted averages(TWAs) that ranged from 61 to 68 dBA. However the levels encountered during taking off jet airplanes reached 126 dBA for two half minutes time period. Th, audiometric, test showed that mean values of HTL(hearing threshold level) in exposed group at every frequency(500, 1,000, 2,000, 4,000, and 8,000 Hz were much lower than them of male and female control groups. And in old age groups, interaction of age and noise was observed at 8,000 Hz in both ears(p<0.05). Conclusively, aircraft noise does not appear to induce hearing loss directly in high frequency, but may decreased hearing threshold level by interaction of aging process and noise exposure. However, difference of mean values of exposed and control groups on blood pressure was not significantly. In psychological test, annoyance was the most severe psychological response to noise in exposed group, but mean value of BEPSI was not correlated with job duration in exposed group.

• The Journal of Korean Academy of Prosthodontics
• /
• v.44 no.2
• /
• pp.229-242
• /
• 2006

Statement of problem: In order to increase preload with reducing the friction coefficient, abutment screws coated with pure gold and Teflon as dry lubricant coatings have been introduced. But the reported data indicate that if screw repeated tightening and loosening cycle, an efficiency of increasing preload was decreased by screw surface wearing off. Purpose: This study was to evaluate the influence of tungsten carbide/carbon coating, which has superior hardness and frictional wear resistance, on the preload of abutment screws and the stability of coating surface after repeated closures. Material and method: The rotational values of abutment screws and the compressive forces between abutment and fixture were measured in implant systems with three different joint connections, one external butt joint and two internal cones. Moreover the stability and the alteration of coating surface were examined by comparison of the compressive force and the removable torque values during 10 consecutive trials, observation with scanning electron microscope and analyzed the elemental composition with energy dispersive x-ray spectroscopy Results and conclusion: 1. Application of coating resulted in significant increase of compressive force in all implant systems(P<.05). The increasing rate of compressive force by coating in external butt joint was gloater than those in internal cones (P<.05). 2. Coated screw showed the significant additional rotation compared to non-coated screw in all implant systems (P<.05). There were no significant differences in the increasing rate of rotation among implant systems (P>.05). 3. Removable torque values were greater with non-coated screw than that with coated screw (P<.05). 4. Coated screw showed insignificant variations in the compressive forces during 10 consecutive trials(P>.05) 5. After repeated trials, the surface layer of coated screw was maintained relatively well. However surface wearing and irregular titanium fragments were found in non-coated screw.

• Journal of the Korean association of regional geographers
• /
• v.12 no.3
• /
• pp.364-381
• /
• 2006

Strategies for regional development has been implemented by facilitating the cultural industry since the mid 1990s. The government of Gyeongbuk attempted to establish the cluster of cultural industries and to enhance the capability of cultural industries. However, infrastructure of the industries is still weak. The most cultural industries are small-sized enterprises and are in low value-added production link in the value chain. This research examines the situation of cultural industries and then to recommend the direction of cluster of cultural industries in Gyeongbuk. The cluster of cultural industries in Gyeongbuk needs to be decentralized integration. Cultural industries in Gyeongbuk are found in dispersed regions with own cultural and industrial characteristics. The hub of cluster of cultural industries should be formulated to promote network among cultural industrial complexes in dispersed regions; thus, the hub is able to provide knowledge and information for the cultural industrial firms in Gyeongbuk. The supporting center as the hub of cluster has to input more energy to establish the on-line and off-line network among firms, and between firms and innovation agencies such as universities, cultural industrial organizations, and local governments. The cultural industrial cluster should be linked with IT cluster in Gumi and cluster of Daegu cultural industries to upgrade the value chain of cultural industries.

• Journal of Biosystems Engineering
• /
• v.41 no.4
• /
• pp.313-318
• /
• 2016

Purpose: This study measured and analyzed the PTO (power take off) torque of a transplanter according to the planting conditions during field operation. Methods: A torque measurement system was constructed with torque sensors to measure the torque of a PTO shaft, a measurement device to acquire sensor signals, and a power controller to provide power for a laptop computer. The field operation was conducted at four planting distances (26, 35, 43, and 80 cm) and two planting depths using the transplanter on a field with similar soil conditions. One-way ANOVA with planting distance and Duncan's multiple range test at a significance level of 0.05 were used to analyze the PTO torque. The torque ratio was calculated based on the minimum torque using the average PTO torque measured under each planting condition. Results: The average torques on the PTO shaft for planting distances of 26, 35, 43, and 80 cm at a low planting depth were 11.05, 9.07, 7.04, and 3.75 Nm, respectively; the same for planting distances of 26, 35, 43, and 80 cm at a middle planting depth were 12.20, 9.86, 7.94, and 4.32 Nm, respectively. When the planting distance decreased by 43, 35, and 26 cm, the torque ratio at a low planting depth increased by 88, 142, and 195%, respectively. When the planting distance decreased by 43, 35, and 26 cm, the torque ratio at the middle planting depth increased by 84, 128, and 182%, respectively. Conclusions: PTO torque fluctuated by planting distance and depth. Moreover, the PTO torque increased for short planting distances. Therefore, farmers should determine the planting conditions of the transplanter by considering the load and durability of the machine. The results of this study provide useful information pertaining to the optimum PTO design of the transplanter considering the field load.

• Korean Journal of Soil Science and Fertilizer
• /
• v.39 no.5
• /
• pp.285-291
• /
• 2006

The lysimeter ($1.2m\;with{\times}1.6m\;length$) experiment using $^{15}N$ tracer method was conducted to investigate the influence of slopes (degree 5, 15 and 30%) and fertilizer application methods (solid application and fertigation) on the behavior of applied urea in saprolite piled highland with Chinese cabbage cultivation. NDFFs(nitrogen derived from fertilizer) in soil were increased with decreasing of degree of slope and of depth of soil. The recovery as percentage of fertilizer nitrogen by Chinese cabbage were 69.5% for solid application and 76.5% for fertigation in 5% slope, 65.0% for solid application and 70.2% for fertigation in 15% slope, and 56.1% for solid application and 62.3% for fertigation in 30% slope. There, fertigation will make great contributions to the reduction of environmental contamination by run off and to the increase of fertilizer efficiency in Chinese cabbage cultivated highland.

• Journal of Life Science
• /
• v.15 no.6 s.73
• /
• pp.851-856
• /
• 2005

Although valuable microbes have been isolated from the soil for the various productions of useful components, the microbes which can be cultivated in the laboratory are only $0.1-1\%$ of all microbes. To solve this problem, the study has recently been tried for making the valuable components from the environment by directly separating unculturable micrbial DNA in the soil. But it is known that humic acid originated from the soil interrupts various restriction enzymes and molecular biological process. Thus, in order to prevent these problems, this study modified the method separated soil DNA with phenol, CTAB and PEG. In order to compare the degree of purity for each DNA and the molecular biological application process, $A_{260}/A_{280}$ ratio, restriction enzymes, and PCR were performed. In case of DNA by the modified method, total yield of DNA was lower but $A_{260}/A_{280}$ ratio was higher than the previously reported methods. It was confirmed that the degree of purity is improved by the modified method. But it was not cut off by all kinds of tested restriction enzymes because of the operation of a very small amount of interrupting substances. When PCR was operated with each diluted DNA in different concentrations and GAPDH primer, the DNA by the modified method could be processed for PCR in the concentration of 100 times higher than by the previously reported separation method. Therefore, this experiment can find out the possibility of utilization for the unknown substances by effectively removing the harmful materials including humic acid and help establishing metagenomic DNA library from the soil DNA having the high degree of purity.

• Journal of fish pathology
• /
• v.23 no.3
• /
• pp.281-291
• /
• 2010

Crytocaryon irritans infection of rock bream was investigated in embankment fish farm from July to December 2009. Prevalence variation was 20.0~88.0% that was high in september and was low in July. While no mortality was found in July and August, it occurred after mid september. Environmental conditions during the survey period were water temperature $19.3{\sim}24.3^{\circ}C$, dissolved oxygen $5.0{\sim}7.1\;mg\;L^{-1}$ and salinity 31.9~33.7 psu, and the water temperature during mortality season was $24.0^{\circ}C$. External symptom of the rock bream was secretion mucus but swimming showed fine in the early infected period. While, the symptoms in the severe outbreak season were excess of mucus, falling off tail and congestion, bleeding spot the surface and weakened swimming. We observed free living and parasitic stages in the gills and body surface of rock bream. Hepato somatic index (HSI) was $1.9{\pm}1.1{\sim}3.5{\pm}1.7%$, which was low in the September being mortality season but was high in November. The percentages of hematocrit infected with Crytocaryon irritans were 37.3% and 41.0% in July and August, respectively while they gradually decreased to 32.1% and 24.2% in september and October, respectively. Total cholesterol and Triglyceride values rapidly decreased by October. After mortality, AST and ALT were 7 and 5 folds higher compared to non-mortality season.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.9
• /
• pp.74-82
• /
• 2016

The term research institute spin-offs refers to new firms created by public research institutes. These spin-offs are different from other start-ups in two respects: on the one hand, they should be located in the Special Research and Development Zones and, on the other hand, these firms are supposed to commercialize the results of public R&D activities. These spin-off firms show higher rates of survival and job creation than general new firms, which means that their contribution to economic growth is not negligible. The present study analyzes the factors affecting research institute spin-offs using a random effect panel logit model and negative binomial model. From previous studies, four elements are identified as playing an important role in the commercialization of public R&D through spin-offs, namely their organizational character, research capability, technological character, and geographical location. The empirical results demonstrate that government research institutes with more researchers and patents are more likely to create new firms. In addition, the location of the institutes significantly affects the probability of their creating spin-offs and their number. When the technological stage and TLO size are considered, however, it turns out that the number of researchers and technological stage play important roles in the spin-offs.